kityatyi

I am wondering how to increase and decrease the map range on the PFD? I already managed to find out how to change between rose, arc and map but when it's in the map mode, I can't find a way to increase and decrease the range.

Please kindly make a TAROM repaint. They are actual real world operators of the type, not historical, not fictional. It would be great to grab a nice EDRM TAROm repaint for the aircraft. Thank you very much!

After shutdown, for some reason the left propeller does not stop spinning. Here is my own little video on it: https://drive.google.com/file/d/1M1ixUT85kc0yupYVof-D3ZQupkvPTEkT/view?usp=sharing But it is also seen in this video, just skip to 1:05:00

When inside the virtual cockpit, looking out on the right flighdeck window towards the right wing, sometimes there is a weird 3D object, a cube seen right there. How did it pass beta testing, really? Below is a screenshot. Discovered during approach, maybe it has to do with landing gear or flap extension? I have also seen the bug in a video, where the uploader thought it is a bug with his repaint. Well, not reallty since I was using the default Carenado CSA repaint.See here:https://imgur.com/Qu5EKzA The same bug can also be seen in this video, just skip to 22:45

Agree about Tarom for sure. They are very long time and loyal ATR operators, flying bothe the -42 and the -72 regularly, both domestically and internationally. Meanwhile many fictional repaints or historical ones, with airlines that no longer even fly the type, have been made available, we do not have a very much active livery of an airline that uses them heavily even now as we speak.

Please. consider the TAROM. If you do it, it's gonna be a premium work for sure!

This would be awesome! Could recreate the real world OTP-BUD-OTP I recently was on.

Fair enough. Surface vis is set to only 25 NM on my AS, since it hardly goes above that. The default 75 is unrealistic indeed.

Exactly. I have also posted this on the LM / P3D official forums because it's in the numbers. The more reports, the sooner it will be fixed. At least, this would be the logical course of events in a perfect world. Reducing the visibility to as low as 30 NM is not realistic. I am not saying that 200 NM is the way to go but if you set your max visibility slider in Active SKy to 199, the weather engine will determine what visibility to render. If it has to render - based on METAR - a low vis, then it will. But I don't want to forcibly get IFR conditions because as you said, there are times we can see far, far away. Reducing vis like crazy is not a fix, it's like putting our heads in the sand (at least this is what we say in Hungary). We need a proper fix for this.

I have started to notice this issue and it's very annoying I encountered it in 4.4 and even now in 4.5 it's still very much alive and kicking.

Jeez, how come I missed this awesome freeware airport for such a long time! I really wanted a KONT for P3DV4 and it was always here in front of my eyes! Will give it a try tomorrow! Wish the author updated it with dynamic lighting for P3DV4! Lookss amazing!

Was too early to say it's sorted. I believed it was sorted but it wasn't. After reinstalling FTX Global I definitely saw trees in places where there were no trees on the above screenshot and I thought, yeah, fixed. I then set up a flight at KPDX and immediately saw I have loads of buildings but no trees... So no, the issue still does exist... I'll try those backups, but I don't know how would they help: I even deleted the whole AUTOGEN folder, and when reinstalled CONTENT the folder was re-built from scratch so it surely does not contain the "corrupt" files.

Yes indeed.

I think I sorted it... Reinstalled ORBX FTX Global, did the trick! Autogen is back! But I am sure it's the ACM that messed it up. 🙂

I can confirm the Autogen Density slider is as it should be.

We may have the same issue. I discovered yesterday that autogen has become very sparse. Can't tell when exactly it happened but I noticed yesterday when checking otu Justsim's Larnaca. But it's not just Larnaca but the whole world seems to be lacking trees and even buildings. Did you manage to fix the issue? I reinstalled P3DV4.4 Content, Client, reinstalled SODE, FTX Trees, OpenLC, uninstalled all my Justsim sceneries, removed the AutogenConfiguationMerger too. But still, missing autogen...

Hi all, P3D V4.4 user here, desperately seeking help. I've been struggling with this for 24-48 hours now. Can't tell when exactly this happened, but yesterday I was about to to a flight and noticed how sparse my world is. Looking around I realized it isn't like what it should be, loads of trees and buildings, perhaps other autogen objects too, are missing. What I installed before I noticed the problem: -FSDT KMEM -FSDT KIAH -FSDT Standalone Addon Manager -FlyTampa KBOS -FSimStudios MMUN That is pretty much everything that I installed during the past 24 hours or so prior to first noticing the issue. What I've tried so far: -reinstalling both P3D Client as well as Content -reinstalling ORBX OpenLC EU (later I realized the issue isn't at all limited to Europe...) -reinstalling Arno's Autogen Configuration Merger (required by some JustSim sceneries) -uninstalling all Justsim sceneries (initially I though it has to to with the ACM or some JS products) -uninstalling the ACM -uninstalling all sceneries that I installed in the past 24-48 hours -reinstalling SODE And still the issues exists, loads of autogen are missing. What do you guys think, what can be the cause and the solution?

Guys, problem solved! The developer is actually quite helpful and he looked into it. The dynamic lights in his ZBAA were compiled with the old 4.0 SDK. He recompiled with the 4.4 SDK and behold, all is fine now!

I hope so.

We need the ER variant.

BINGO! As soon as I turned OFF the Dynamic Lights in the P3D Options, the dome light began working in both the PMDG 777 as well as the QW 787. What the heck is this then? So far I haven't noticed this issue anywhere else so I dare to think that it's the scenery developer who needs to intervene.

Great idea man, thanks! Will try with DL switched OFF! Will report back!

Hi guys,A very strange issue that I noticed only at WF Scenery Studio's Beijing Capital (ZBAA) scenery. Whenever my PMDG Boeing 777 (as well as my QW 787) is at this airport, and only at this one and only airport, the dome light does not work. The switch does work properly but it does not project any light at all. However, when I depart from the airport and leave the scenery territory, the lights suddenly do begin to work. Or if I just simply position the aircraft to any other scenery or airport through the menus, again, the dome light works without any issues suddenly. The same I experience using the QW Dreamliner. The dome light however does work using the CS 757 as well as the FSL A319. Before people start to misunderstand me and think I am blaming anyone - as it already happened in the past - I'd like to highlight I am not blaming anyone here but trying to seek advice, maybe someone who also has this scenery product could kindly check for me. I tried both with and without modified shaders, intitially thinking Tomato Shade could be the culprit but no. Even with default shaders the issue does exist. A QW team member, however, reported that he's got no issues in his 787. So what? Can someone please check, using the PMDG 777 where I also do have the issue of having no working dome lights please - or perhaps point me to the right direction what could possibly cause this problem.I already reported this to the developer of that particular ZBAA but I also want to make sure it's not me doing something wrong. Appreciate your comments in advance.

Would be interested in what CI Scoot use in ther 787 aircraft. Anyone with a clue please?

Hi there and thank you for your reply! I also do own both TOPCAT and TOPER (for the 777). TOPS is a simple looking tool, it requires manual entry. I have actually never used it because when it was released it was kind of lacking in many ways but I have recently read that initial bugs are fixed and functions are added so I thought I'd give it a try but I do not like to ALT+TAB or interrupt P3D so I tend to install 3rd party stuff on my laptop (Active Sky, PFPX, TOPCAT, Navigraph Charts etc are all on my laptop). However, TOPS have no convenient ways of connecting it to the P3D computer and the developer wasn't too specific on how to do it, but at least, he did shed some light on it. Via WideFs, he said. But it isn't much help in itself. "Hello, Yes it working on networked environment via WideFs . No need particular configuration."