Either I'm doing it completely wrong or this thing is a lost cause. I give up.

majhankee, this is part of my scenery.cfg file you can see the imaginesim ewr settings just go to your scenery.cfg and make sure the excludes and flattens are there just copy and paste the ones here to your file under were it says remote. just like below it should work.[Area.039]Title=Imagine Simulation - KEWR NewarkLayer=39Active=TRUERequired=FALSELocal=Imagine Simulation\KEWR NewarkRemote=Exclude=N40 42.50,W74 09.27,N40 40.26,W74 11.58,objectsFlatten.0=18.0444,N40 42.54,W74 11.79,N40 42.54,W74 09.01,N40 40.05,W74 09.01,N40 40.05,W74 11.79

majhankee, this is part of my scenery.cfg file you can see the imaginesim ewr settings just go to your scenery.cfg and make sure the excludes and flattens are there just copy and paste the ones here to your file under were it says remote. just like below it should work.[Area.039]Title=Imagine Simulation - KEWR NewarkLayer=39Active=TRUERequired=FALSELocal=Imagine Simulation\KEWR NewarkRemote=Exclude=N40 42.50,W74 09.27,N40 40.26,W74 11.58,objectsFlatten.0=18.0444,N40 42.54,W74 11.79,N40 42.54,W74 09.01,N40 40.05,W74 09.01,N40 40.05,W74 11.79

It's still not working. Maybe I'm missing something else that's really obvious?

majhankee, this is part of my scenery.cfg file you can see the imaginesim ewr settings just go to your scenery.cfg and make sure the excludes and flattens are there just copy and paste the ones here to your file under were it says remote. just like below it should work.[Area.039]Title=Imagine Simulation - KEWR NewarkLayer=39Active=TRUERequired=FALSELocal=Imagine Simulation\KEWR NewarkRemote=Exclude=N40 42.50,W74 09.27,N40 40.26,W74 11.58,objectsFlatten.0=18.0444,N40 42.54,W74 11.79,N40 42.54,W74 09.01,N40 40.05,W74 09.01,N40 40.05,W74 11.79

It's still not working. Maybe I'm missing something else that's really obvious?

Pardon me, I might be wrong. But I think the Exclude syntax is wrong.I believe it is supposed to be - Exclude=North Latitude,West Longitude,South Latitude,East Longitude,category Unless I am backwards you have East and West in each others place.For the Exclude line try - Exclude=N40 42.50,W74 11.58,N40 40.26,W74 09.27,objectsregards,Joe

Pardon me, I might be wrong. But I think the Exclude syntax is wrong.I believe it is supposed to be - Exclude=North Latitude,West Longitude,South Latitude,East Longitude,category Unless I am backwards you have East and West in each others place.For the Exclude line try - Exclude=N40 42.50,W74 11.58,N40 40.26,W74 09.27,objectsregards,Joe

I tried and it didn't work... :(It's hopeless guys but thanks for all the help.

I tried and it didn't work... :( It's hopeless guys but thanks for all the help.

I went thru all this last year with this KEWR. It's nonsense. And you know what, it killed my frame rates anyway. I found a free-ware that isn't as good graphics wise but much better than the default and great on frames.

It didn't work...yet again! I give up...I'll either have to revert to my old KEWR scenery or use this one with the annoying building intrusions...

Do you have another addon for KEWR, or are you referring to the default?

<?xml version="1.0" encoding="ISO-8859-1"?><FSData version="9.0" xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' xsi:noNamespaceSchemaLocation="bglcomp.xsd" ><ExclusionRectangle latitudeMinimum="N40 42.50" latitudeMaximum="N40 40.26" longitudeMinimum="W74 09.27" longitudeMaximum="W74 11.58" excludeAllObjects = "TRUE" excludeBeaconObjects = "FALSE" excludeEffectObjects = "FALSE" excludeGenericBuildingObjects = "FALSE" excludeLibraryObjects = "FALSE" excludeTaxiwaySignObjects = "FALSE" excludeTriggerObjects = "FALSE" excludeWindsockObjects = "FALSE"/></FSData>^ Those are the exclude lines. Do I copy and paste the entire thing or only a part of it? And where do I paste it specifically under KEWR? Can it be anywhere?

Where did you find this at?regards,Joe

Do you have another addon for KEWR, or are you referring to the default?Where did you find this at?regards,Joe

I do have another add-on but I disabled it.Also, I found that file in my Documents folder (not the FS2004 folder).

I was just reading through this today after a lengthy search as to why I kept getting a CTD issue in the New York area. I shut down reinstalled all my scenery and tested to no end until I found the problem to be with ImagineSim's KEWR. I get weird graphical anomalies that I didn't notice before (as I don't fly into this airport often) that just threw out red flags when I took a closer look. Disabling the scenery I'm now able to fly from say SBGL to Kennedy without issue. I redownloaded KEWR and still found an issue with this scenery. There's been many of us who asked Imaginesim to redo KEWR but they declined. Now after years of thinking another issue was at play in the NYC area it was this scenery all along that was causing my 'Out of Memory' errors when flying into this area. We really need an updated KEWR as it's apparent there's a void concerning this airport in FS.

You've got my vote!:(Unfortunately, KEWR was their last "old style" scenery and not a good one at that... After KEWR came KCLT, big difference in techniques and quality.

You've got my vote!:(Unfortunately, KEWR was their last "old style" scenery and not a good one at that... After KEWR came KCLT, big difference in techniques and quality.

Agreed KEWR can do with an update as bad as any airport in FS... However, with that being said I have been using the IS KEWR scenery for literally every long haul flight I do as I use KEWR as a base and am pretty much always flying to or from KEWR. While the performance there is the worst I get anywhere in FS since switching to a 64 bit OS and making FS LargeAddressAware I have not had a single OOM.You definitely have my vote for a redone KEWR!!-Paul