October 29, 201114 yr My AES config (intelliscene.cfg) data, now including the newly released 600 & 700 variants. If it doesn't already exist, use a text editor to create a plain text file called "intelliscene.cfg" in each aircraft directory. Then paste the following code boxes into each respective file.Make sure you end the intelliscene.cfg file with a blank line at the end of each code block (Enter key to create a blank last line)<fsx root>simobjectsAirplanesPMDG 737-600NGXintelliscene.cfg[Descr]Type=736[Geom]Nosegear= 7.95Door1=-1.7, 7.05, 2.7, 2Door4=-1.4,-11.65, 3,-11Front= .55, 4.5, 1.7Rear= .5,-7.75, 2 <fsx root>simobjectsAirplanesPMDG 737-700NGXintelliscene.cfg [Descr]Type=737[Geom]Nosegear= 9.45Door1=-1.55, 8.5, 2.8, 5Door4=-1.5,-12.65, 3,-11Front= .55, 5.25, 1.7Rear= .5,-8.7, 2 <fsx root>simobjectsAirplanesPMDG 737-700NGX WLintelliscene.cfg [Descr]Type=737W[Geom]Nosegear= 9.4Door1=-1.55, 8.5, 2.8, 5Door4=-1.4,-12.65, 3,-11Front= .55, 5.2, 1.7Rear= .5,-8.75, 2 <fsx root>simobjectsAirplanesPMDG 737-800NGXintelliscene.cfg [Descr]Type=738[Geom]Nosegear= 12.35Door1=-1.55, 11.5, 2.8, 13Door4=-1.4,-15.6, 3,-11Front= .55, 8.1, 1.7Rear= .5,-11.6, 2 <fsx root>simobjectsAirplanesPMDG 737-800NGX WLintelliscene.cfg [Descr]Type=738W[Geom]Nosegear= 12.35Door1=-1.55, 11.5, 2.8, 13Door4=-1.4,-15.6, 3,-11Front= .55, 8.1, 1.7Rear= .5,-11.6, 2 <fsx root>simobjectsAirplanesPMDG 737-900NGXintelliscene.cfg [Descr]Type=739[Geom]Nosegear= 13.85Door1=-1.55, 12.9, 2.8, 13Door4=-1.4,-16.45, 3,-11Front= .55, 9.5, 1.7Rear= .5,-12.55, 2 <fsx root>simobjectsAirplanesPMDG 737-900NGX WLintelliscene.cfg [Descr]Type=739W[Geom]Nosegear= 13.85Door1=-1.55, 12.9, 2.8, 13Door4=-1.4,-16.45, 3,-11Front= .55, 9.5, 1.7Rear= .5,-12.55, 2 Regards, Al Jordan | KCAE
October 29, 201114 yr ah wonderful! i spent ages today getting aes to work with the 700WL and decided when i got to the end of it to leave doing the rest of the new series until i need that specific aircraft, this is much easier many thanks! Name : Stuart McIntyreVatsim ID : 932425http://www.flyuk.aero
October 29, 201114 yr Thanks! Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
December 22, 201114 yr Author BTW, if you're using the latest 2.20 versions of AES, you may notice the rear luggage loader has changed to skid-type loader - which I find very unrealistic here in the U.S.With regard to my posted configuration settings above, simply change the number 2 on the very last line to a 1.9 - this is just enough to get the belt-type loader back. It lines up a bit low for my tastes but it's better than the skid-loader appearing. For example: change the -900NGX as follows. Change the other variants accordingly.Change:Rear= .5,-12.55, 2To:Rear= .5,-12.55, 1.9I've asked Oliver to consider raising the threashold between skid and belt loaders in this converstation here:http://forum.aerosoft.com/index.php/topic/50845-aes-220b-bugreport-please-post-here/page__view__findpost__p__345783 Regards, Al Jordan | KCAE
February 22, 201214 yr HELLO ,I have version 2.21 and I have not busy ramp for the lagage. only withe PMDG NGX no problème with other planthk for your help
Create an account or sign in to comment