Hi, i sent some feedback with little issues to JF to see what can be done:1) ALT HOLD - In more than one flight it cannot be able to hold alt with ap on.2) Trim Wheel - It works ALL the flight going up and down regardless if i´m stabilized in flight or not. Tried with clean skies with no wind and it still do that. Like 1 degree up followed to 1 degree down imediately after and all again.3) Window heat lights don´t work in 2d or VC4) Seatbelts/Nosmoke don´t work in vc5) Wx Radar can´t turn on/off in vc6) Please, re-do the exits mapping. It´s very dificult to open the doors correctly (Yes, apu, bat and ground power on) and FSDreamTeam GSX don´t work with it. Even the cargo tugs don´t align with the cargo bays. Well, please look this if it´s possible.7) HDG lights don´t work in VC FO, even if they are on in the ap panel8) I know it´s more dificult, but please look for a better jt8d sound package.9) The VC buttons clickspots are way off their position in many buttons.10) Ground power light don´t goes out even when taxing.Look that it´s just a feedback of what i´m seeing in here. And i hope for a patch that put this bird in the fsx hall of fame soon. :(

Flavio,"2) Trim Wheel - It works ALL the flight going up and down regardless if i´m stabilized in flight or not."Mine worked ok after stablized climb and cruise .. I wonder if elevator (game yoke) sensitivity or null is causing extra problems for you?I use Saktek Yoke/throttles (throttle levers rev thrust works good too) , axis assigned/calibrated in registured FSUIPC. Just for info.I use 2D .. so I see fewer problems, but I did yesterday also report some problems you and others seen to JF tech also.I will take more training flights and see if anything else pops up.Actually, from what I have seen in other major sim releases (LD / PMDG / iFly, that I purchased), this is a short list of needed fixes.All vendors release their products (with bugs) knowing that SP's will be required on items missed by beta testers.Some people previously used a term that can be applied here ... not a show stopper IMO.Ezdok installed ok and I am setting up cameras for my VC using TrackIr ... Look good.I am going to see if I can get my RealityXp Garmin in here later on my monitor #2 ... it has an up to date worldwide Nav Database, RNAV LVP approaches etc.

Quick question for the people who have purchased:Now you've had a few days to explore, what's the verdict? Is it worth waiting for JF to perhaps produce a service pack for this one or wait to see how the CS and Mil Viz models turn out?Cheers.

More comments here:http://forum.avsim.net/topic/365646-anyone-else-getting-this-issue-with-the-jf-737/

Flavio,"2) Trim Wheel - It works ALL the flight going up and down regardless if i´m stabilized in flight or not."Mine worked ok after stablized climb and cruise .. I wonder if elevator (game yoke) sensitivity or null is causing extra problems for you?I use Saktek Yoke/throttles (throttle levers rev thrust works good too) , axis assigned/calibrated in registured FSUIPC. Just for info.

I too use Saitek Yoke/Throttles and tried various sensitivty & null zones settings, including the default as recommended in the 737's manual; yet I still got this same problem; The trim wheel constantly moving through the whole flight. If I had kept this addon, I would have needed to have removed that sound file, as it literally gave me a headache! ...going the whole way through the flight. :(

If you watch some cockpit videos of 737s; it's really not that uncommon for the trim wheel to be clattering away a lot of the time. I too have a Saitek stick by the way.Al

If you watch some cockpit videos of 737s; it's really not that uncommon for the trim wheel to be clattering away a lot of the time. I too have a Saitek stick by the way.Al

Absolutely Al, I've got the Alaskan 737-200 DVD from Just Flight, and the trim wheel does vary a lot even in cruise; but the constantness (is that a word :() of the particular sound in this model, does cause a bit of listening fatigue. :(

I too use Saitek Yoke/Throttles and tried various sensitivty & null zones settings, including the default as recommended in the 737's manual; yet I still got this same problem; The trim wheel constantly moving through the whole flight. If I had kept this addon, I would have needed to have removed that sound file, as it literally gave me a headache! ...going the whole way through the flight. :(

I was surprised to see you back here since you stopped flying the JF737-200 .. you sure did a lot of flying / testing in the very short time you had it.Well, my Saitek yoke does not have your problem ... normal trim wheel actions, no headache.

I don´t have a saitek, just a logitech stick with no special configurations and the trim wheel don´t stop.

I can't Alt-Enter without a CTD in this A/C. It's frustrating

That's a strange one, I can manage that okay (that's with an ATI graphics card).Al

My Altitude Call outs are also nearly non-existent. Instead of a clear "50, 40, 30, etc" I get a tiny (I mean nearly inaudible) sound that resembles a hiccup... Yes, a literal hiccup.The rest is just okay. For $45 I feel pretty bad about the purchase. Pretty bad indeed. And that's coming from a 737 Classic fanatic.

I'd stick a report in about your crash and other gripes. There's a link above on this thread for where to do it from a JF guy, so it seems they will be looking at stuff and want feedback.Al

I'd stick a report in about your crash and other gripes. There's a link above on this thread for where to do it from a JF guy, so it seems they will be looking at stuff and want feedback.Al

Already on it. I just feel it belongs in this "feedback thread" as well. The aircraft is pretty rough around the edges, that's for sure.

I'd stick a report in about your crash and other gripes. There's a link above on this thread for where to do it from a JF guy, so it seems they will be looking at stuff and want feedback.Al

I was working with their tech this morning.They had me send my PC info yesterday, today we removed a file ..it fixed the problem of FSX crashing when loading the aircraft without loading the default Cessna first. I could also load their Tutor flight straight away without an error.But I just noticed .. testing the trim noise again because mine had settled down ... well, the file that was removed made the trim wheel rotation inop and the sounds inop (silent) .. but from the exterior view I had elevator control.Interesting. I am now waiting for what to do next.So yes, they are working on this stuff as we speak....So, as a test I put the file back and got up a few thousand and leveled .. trim wheel was not moving much and no "rattling" .. I took a few screenshots but maybe I will do a video on a flight with a couple segments. I am just learning here so I may have something set wrong way for elevator checks ...Anyway, I await my next instruction from them.