Jump to content

Sign in to follow this  
ryanbatcund

Realair Turbine Duke for v3

Recommended Posts

You don't need the F1 tool for the Duke though -

 

I guess if you're changing something like screen brightness maybe...


|Ryan Butterworth|

| i7 4790K@4.4GHz | 32GB RAM | EVGA GTX 1080Ti | ASUS Z97-Pro | 1TB 860 Evo | 500GB 840 Evo Win10 Pro | 1TB Samsung 7200rpm | Seasonic X750W |

 

 

Share this post


Link to post

Thanks Rob and Rock,  I'll try the right way first.  Suspect it's important to do a reboot after the Duke install - as I've found before when some software - e.g. the GTN config - looks for registry entries.

Considering the location and folder differences in v3 as against v2, that's good work Rob.  Thanks.

Share this post


Link to post

On my system F1 Tool would not find the Duke until I temporarely copied it to the Prepar3d V3 folder. I then launched F1 config tool, set up my Duke, saved, and moved the TDuke folder back to c:\realair.

 

If you have GTN v1.13 it should find and configure aircraft installed outside the sim, mine does anyway, v1.12 didn't, so make sure you have the latest GTN version.

Share this post


Link to post

Will install tonight, only use the GTN with the duke, Its been some time, does the GTN 750 cross feed yet?


David Murden.  MSFS2020   DCS  

10900K@4.9 All Cores HT ON  Asus ROG Strix Z490-E  32GB DDR4 CL14 3200MHz RTX 3080  Corsair iCUE H150i Pro XT 360mm 

Corsair HX850i Platinum Plus 2x 1TB Samsung EVO Plus M.2  Phanteks Enthoo Evolo X Case  Thrustmaster Warthog HOTAS & TPR 

TrackIR • Samsung G7 32" 1440p 240Hz • Internet BT 75 Mbps Unlimited 

 

Share this post


Link to post

On my system F1 Tool would not find the Duke until I temporarely copied it to the Prepar3d V3 folder. I then launched F1 config tool, set up my Duke, saved, and moved the TDuke folder back to c:\realair.

 

Yes, it didn't display in my GTNconfig list either.

 

But I just browsed over to;

 

C:\RealAir\Turbine Duke V2 P3D3\SimObjects\Airplanes\RealAir Duke Turbine V2\F1GTN

 

..........and manually made the changes I wanted to make to the GTN750s config (which was to remove the sound (click) which I hate with a passion!).


Bill (JYW)

XP11 ~ P3D ~ FSX:SE

Share this post


Link to post

Hum - to Rob Young and anyone who has noticed.  After install in the default v3 location

 

I can find them - but all the Duke T V2 documents are listed under Turbine Duke V2 P3D2 in the Start Menu.  Only the Uninstall is listed under Turbine Duke V2 P3D3    Huh?

 

The docs themselves are in C:\RealAir\Turbine Duke V2 P3D3\RealAir\duketv2p3d2\AutoPlay\Docs         - and that typed exactly as in explorer

 

Thanks be I only have the P3D v3 version    - but I have a Docs folder  within AutoPlay folder within a duketv2p3dv2 folder within a RealAir folder within a Turbine Duke V2 P3D2 folder within

. . .  well you get the point.  No P3D v2 anywhere in sight.

 

I will now try the GTN . . .

 

edit - oh good, no show, the GTN is 112 - for my next trick . . .

  • Upvote 1

Share this post


Link to post

Hi

can anyone tell me if i should be seeing landing light splashes on the runways.when i turn them on there is nothing.

 

 thanks

  steve


REX SKYFORCE 3D

 

steve howlett

Share this post


Link to post

so I've got a Duke V2 showing, got GTN750 showing  - now 113. . . but instrument panel self-test only, and can't get anything else on GTN to work - "Continue" button is dead

What the?  4 minutes later suddenly 750 shows home screen or whatever it is . . . the no movement again  - no buttons or touch screen working

 

weird - have to open the GTN config before anything works

 

and well - fps 11

 

nope - that was GTN on another monitor   just normal without undocked GTN getting 28  - but then no click spots working! - have to take Sli off . . .

 

I give up - computer going out window . . .

Share this post


Link to post

Hi

can anyone tell me if i should be seeing landing light splashes on the runways.when i turn them on there is nothing.

 

 thanks

  steve

 

I see it externally, but I'm not seeing it from the VC.  This WAS working (I know because I beta'd it).  Hmmmm


|Ryan Butterworth|

| i7 4790K@4.4GHz | 32GB RAM | EVGA GTX 1080Ti | ASUS Z97-Pro | 1TB 860 Evo | 500GB 840 Evo Win10 Pro | 1TB Samsung 7200rpm | Seasonic X750W |

 

 

Share this post


Link to post

If you are not seeing landing light beams, simply reload the duke on the fly (there's a quick reload command in P3d controls/assignments) and that should fix it.


Robert Young - retired full time developer - see my nexus mod page and my GitHub Mod page

Share this post


Link to post

If you are not seeing landing light beams, simply reload the duke on the fly (there's a quick reload command in P3d controls/assignments) and that should fix it.

 

Yep I knew I wasn't dreaming hehe...


|Ryan Butterworth|

| i7 4790K@4.4GHz | 32GB RAM | EVGA GTX 1080Ti | ASUS Z97-Pro | 1TB 860 Evo | 500GB 840 Evo Win10 Pro | 1TB Samsung 7200rpm | Seasonic X750W |

 

 

Share this post


Link to post

. . . but instrument panel self-test only, and can't get anything else on GTN to work - "Continue" button is dead

What the?  4 minutes later suddenly 750 shows home screen or whatever it is . . . the no movement again  - no buttons or touch screen working

 

I wonder if this is relevant (legacy mode)?

 

http://www.simforums.com/forums/gtn-750-screen-unresponsive_topic53177.html

 

EDIT: I've noticed mine goes dead once in a while but usually opening the pop-up once and clicking the screen once fixes it and after it goes back into the panel I can click it again.

Share this post


Link to post

 

Seems v2 of the piston Duke works quite well in P3D v3

But do you have cockpit sounds - switch clicks, landing gear, flaps?


My system specs: Intel i9-10850@3.6 - 5.2 GHz, NVIDIA GeForce RTX 3080, 32GB  DDR4  RAMNoctua NH-D15 CPU Cooler,1TB Seagate SSD, 4TB Seagate HD, Windows 10.     Sims: MSFS2020      Preferred Aircraft So far the PE44, because it's the only twin with steam gauges that I am aware of. Waiting for A!

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
  • Donation Goals

    AVSIM's 2020 Fundraising Goal

    Donate to our annual general fundraising goal. This donation keeps our doors open and providing you service 24 x 7 x 365. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. We reset this goal every new year for the following year's goal.


    39%
    $9,950.00 of $25,000.00 Donate Now
×
×
  • Create New...