Jump to content

Recommended Posts

So after giving this mod another try, it seems to break the autopilot ALT-SEL and VS modes. I really want to like this aircraft, but the FPS drop from the G1000 MFD is just too much. I asked Carenado support about it, and they just told me my settings were too high. Anybody have any ideas on a fix for the autopilot w/ the GTN750? Or the G1000 for that matter?

 

Thanks! 

Share this post


Link to post
Share on other sites

Hi all,
 
I know it's a bit late in replying to this but I have just got around to installing version 2 ( been busy elsewhere). It appears that the autopilot with the GTN750 mod will not work on version two as Carenado have changed the panel.cfg therefore panel layout, including a different autopilot. I only noticed this when looking at the new panel the A/P is a different colour, the new one's darker!
The upshot is that I have managed to merge the new Carenado panel.cfg with the GTN750 panel.cfg and this is listed below with changes in bold. BTW this is for FSX only I don't have P3D.
 
//*********************************************************
// CARENADO C208EX G1000 FSX/P3D
// Copyright © Carenado 2013 - All Rights Reserved
//*********************************************************

[Window Titles]
Window00=G1000_PFD
Window01=G1000_MFD
Window02=AUTOPILOT
Window03=Toggle_Control
Window04=INFO
Window05=ENGINE SETUP
Window06=START
Window07=GTN750

[VIEWS]
VIEW_FORWARD_DIR=-1.000, 0.000, 0.000



//--------------------------------------------------------
[Window00]
Background_color=4,4,4
size_mm=512,335
position=6
visible=0
ident=MAIN_PANEL
window_size=0.49, 0.59
no_luminous=1
window_pos=  0.000,  0.350

gauge00=C208EX_G1000!G1000_configC208,         0,0,   1,  1
gauge01=C208EX_G1000!G1000_PFDC208,            0,0,512, 335
gauge02=C208EX!ToggleCARG1000,          60,0,390,  25

//--------------------------------------------------------
[Window01]
Background_color=4,4,4
size_mm=512,335
position=8
visible=0
ident=10010
window_size=0.49, 0.59
no_luminous=1
window_pos=  0.500,  0.350

gauge00=C208EX_G1000!G1000_configC208,         0,0,   1,   1
gauge01=C208EX_G1000!G1000_MFDC208,             0,0, 512, 335
gauge02=C208EX!ToggleCARG1100,           60,0,390,  25

//--------------------------------------------------------
[Window02]
Background_color=0,0,0
size_mm=1199, 200
position=1
visible=0
windowsize_ratio=1.00
ident=10130
window_pos= 0.248, 0.020
window_size= 0.506, 0.150
size_mm=443, 712

gauge00=C208EX_GAUGE!Gauge_AUTOPILOT_C208EX,              0,  0,  1199, 200
gauge01=C208EX!Toggle10130,                           0,  0,  1199, 10


//-------------------------------------------------------
[Window03]
Background_color=0,0,0
size_mm=500,328
position=0
visible=0
ident=796
window_size= 0.214,0.250
window_pos= 0.010, 0.155
zorder=5

gauge00=C208EX!Control_windows,  0,0,500,328


//--------------------------------------------------------
[Window04]
file=info.bmp
size_mm=555,139
window_size_ratio=1.000  
position=0
visible=0
ident=10020
window_size= 0.292, 0.130
window_pos=  0.010, 0.020

gauge00=C208EX!ToggleCAR530,  10,10,400,100


//--------------------------------------------------------
[Window05]
Background_color=0,0,0
size_mm=600,653
window_size= 0.350, .500
position=3
visible=0
nomenu=1
ident=10060

gauge00=GAUGEC208EX!StartWindowsAircraft,   0,  0, 600,653


//--------------------------------------------------------
[Window06]
Background_color=0,0,0
size_mm=600,653
window_size= 0.350, .500
position=5
visible=0
nomenu=1
ident=10050

gauge00=GAUGEC208EX!StartWindows,   0,  0, 600,653

//--------------------------------------------------------
[Window07]
Background_color=0,0,0
size_mm=937,887
ident=14401
position=8
window_size= 0.340, 0.600
window_pos= 0.660, 0.000
zorder=99

gauge00=F1GTN!GTN750,  0,0,937,887,UNIT1.POP

//--------------------------------------------------------
[Vcockpit01]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=1024,1024
texture=$Panel_1

gauge00=C208EX_G1000!G1000_configC208,     0,    0,   1,  1
gauge01=C208EX_G1000!G1000_PFDC208VC,      0,    0, 383, 247
gauge02=C208EX!ToggleCARG1000,          64,0, 256, 32


//--------------------------------------------------------
[Vcockpit02]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=1024,1024
texture=$Panel_2

gauge01=C208EX!ToggleCARG1100,        64,0, 256, 11
gauge02=CARC208EX_G1000!GPS_TCAS,         0,0,   1,  1
gauge03=PayLoad_GaugeC208EX!PayLoad, 0,0,1,1
gauge04=F1GTN!GTN750VC, 50,-31,282,248,UNIT1
gauge05=GTN750!ToggleCAR14401,             0,90,47,247
gauge06=GTN750!ToggleDirectTo,             342,169,15,10


//--------------------------------------------------------
[Vcockpit03]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=512,512
texture=$Panel_3

gauge00=C208EX_G1000!G1000_Audio,437, 0, 75, 423
gauge01=GAUGEC208EX!Gauge_CLOCK_DIG,         0,  0,1 , 1
gauge02=CarSound_CE208EX!CarSound,  2,2,5,5
gauge03=GAUGEC208EX!Radio_KR87_ADF,  0, 111,421, 87
gauge04=C208EX!ToggleCAR430,    65,0,200,40
gauge05=C208EX_GAUGE!GAUGE_G1000_PEDESTAL_BTN_OUTER, 77,284,95,105
gauge06=C208EX_GAUGE!GAUGE_G1000_PEDESTAL_BTN_INNER, 178,284,95,105
gauge07=C208EX_GAUGE!Gauge_AUTOPILOT_C208EXVC,          0, 425, 512,  86
gauge08=GAUGEC208EX!PS440HF,        275, 212, 160, 177


//--------------------------------------------------------
[Vcockpit04]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=1024,1024

texture=$Panel_4

gauge00=C208EX_G1000!G1000_PFDC208VC2,           0,    0, 384, 247



Day=255,255,255
Night=223,255,255
Luminous=246,115,119

[Default View]
X=0
Y=0
SIZE_X=8192
SIZE_Y=6143

 

All you need to do is backup the ..Carenado C208B_Grand_Caravan_EX\panel.GTN750\panel.cfg, Then open the old panel.cfg, edit and delete all the entries in the file and copy and paste the above entries and save the file. There is one other thing to do and that is as follows:

 

In the Carenado C208B_Grand_Caravan_EX\panel\  folder copy/paste the file info.bmp to the Carenado C208B_Grand_Caravan_EX\panel.GTN750 folder overwriting the old one.

 

Well it works for me, and  of course I accept no responsibility for this change damaging your flightsim or computer setup in any way!!! you use it at your own risk. Also the this is still Carenado's intellectual property not mine, and I do not make claim to it in any way!!!

 

Lastly I do not go on these forums very often so any questions you have may not be answered very quickly, if at all.

  • Upvote 2

Best regards,

 

Nigel

Share this post


Link to post
Share on other sites
On 8.12.2017 at 9:24 PM, Mark Davie said:

I know resurrecting an old thread isn't great but I wanted to confirm that this is tested and working in p3dv4.1 on the Ex c208

 

Mark 

Joining the question...

Share this post


Link to post
Share on other sites
On 12/8/2017 at 2:24 PM, Mark Davie said:

I know resurrecting an old thread isn't great but I wanted to confirm that this is tested and working in p3dv4.1 on the Ex c208

 

Is that a question or a statement?

Share this post


Link to post
Share on other sites
On 8.12.2017 at 9:24 PM, Mark Davie said:

I know resurrecting an old thread isn't great but I wanted to confirm that this is tested and working in p3dv4.1 on the Ex c208

 

Mark 

It dosent work for me... any chance you can send me your PANEL CFG in private messege... i tried to make it work for like two hours

Share this post


Link to post
Share on other sites

If anyone is interested, I've created a VC merge for the GTN750 that retains the C208 engine gauges and adds a few other "goodies" (LPV glidepath, GTN clickspot, etc.). PM me if you'd like to give it a try.

 

bhqLk9O.jpg

  • Upvote 2

Trevor Bair

PP ASEL+IR | Cessna Driver: C172 ᛫ C182 ᛫ C208B | KLMO
My Real World Travels & Aviation Photography

Share this post


Link to post
Share on other sites
On 27.12.2017 at 11:48 PM, V1VrV2 said:

If anyone is interested, I've created a VC merge for the GTN750 that retains the C208 engine gauges and adds a few other "goodies" (LPV glidepath, GTN clickspot, etc.). PM me if you'd like to give it a try.

 

bhqLk9O.jpg

I just used the gtn mod that can be found on this post and added the svs line now i have the gtn mod and svs.

im trying to do the same with bert's gtn mod but when i do the alt select dosent work..

without svs it wokrs fine but if it works in the caravan i dont see a reason that it wont work in the tbm so if someone can do anything with the tbm...

Share this post


Link to post
Share on other sites
On ‎12‎/‎27‎/‎2017 at 4:48 PM, V1VrV2 said:

If anyone is interested, I've created a VC merge for the GTN750 that retains the C208 engine gauges and adds a few other "goodies" (LPV glidepath, GTN clickspot, etc.). PM me if you'd like to give it a try.

 

bhqLk9O.jpg

Hi Trevor, I'm interested in your mod and have sent you a PM. Thanks!


PC: 4670K, RAM 24GB, Geforce GTX 1070 (8GB), Windows 10 Home, 64-BIT, FSX-SE, XP-11, P3DV4.5 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...