June 17, 20178 yr 2 minutes ago, Olmba said: Hi, I have that same experience and have been investigated this issue for some days. I come to the conclusion that this causes by the AM tweek setting. When enable AM i have rock steady 30 FPS, but the ground texture looks terrible. I'm running I7-3930 @3.20 clocked to 4700 with HT on. Still haven't found any AM that works for my system. Remove AF in p3d.cfg and see if you back to normal. Like the 253 I recommended for his 4-core, you could try 4093. Again, just uses all your cores except the first logical core. [MSI MPG X870E Carbon | 9800X3D (PBO +200Mhz / -20 Offset) | Corsair 64GB DDR5 (Custom Timings) | RTX 4090 Founders Edition (Undervolted) | WD SNX 850X 4TB + 4TB | Antec Flux Pro]
June 17, 20178 yr Author 1 minute ago, Olmba said: Remove AF in p3d.cfg and see if you back to normal. It's definitely the AM setting and as the others have said the 1st core seems to be the important one. No AM and the detail remains constant and I'm currently trying 253 and that seems to work as well Brian Thomas MSFS2020/24, Intel i9-14900K, GeForce RTX 4070 Ti SUPER Panther OC 16GB GDDR6X, MSI MAG Z790 TOMAHAWK WIFI (LGA 1700) DDR5, Corsair Vengeance RGB 64GB (2X32GB) DDR5 5600MHz, BenQ PD3205U 32” UHD monitor, Win 11 Pro 64-bit,
June 17, 20178 yr I get best results running my 6700K with HT off and no affinity mask in P3D. I've tried a couple of affinity settings but blurries are always the result, in exactly the same manner as originally noted by OP. Dan Downs KCRP
June 17, 20178 yr Author 2 minutes ago, Sethos1988 said: Like the 253 I recommended for his 4-core, you could try 4093. Again, just uses all your cores except the first logical core. 253 running at the moment and all looks good :) Brian Thomas MSFS2020/24, Intel i9-14900K, GeForce RTX 4070 Ti SUPER Panther OC 16GB GDDR6X, MSI MAG Z790 TOMAHAWK WIFI (LGA 1700) DDR5, Corsair Vengeance RGB 64GB (2X32GB) DDR5 5600MHz, BenQ PD3205U 32” UHD monitor, Win 11 Pro 64-bit,
June 17, 20178 yr Just now, BrianT said: 253 running at the moment and all looks good :) Sounds good, not sure if you feel any difference between 253 and no AM but, anything beats the blurries. [MSI MPG X870E Carbon | 9800X3D (PBO +200Mhz / -20 Offset) | Corsair 64GB DDR5 (Custom Timings) | RTX 4090 Founders Edition (Undervolted) | WD SNX 850X 4TB + 4TB | Antec Flux Pro]
June 17, 20178 yr Author Well thanks for all the advice guys. It's time for this one to get some shut eye so more.... or less tinkering tomorrow Brian Thomas MSFS2020/24, Intel i9-14900K, GeForce RTX 4070 Ti SUPER Panther OC 16GB GDDR6X, MSI MAG Z790 TOMAHAWK WIFI (LGA 1700) DDR5, Corsair Vengeance RGB 64GB (2X32GB) DDR5 5600MHz, BenQ PD3205U 32” UHD monitor, Win 11 Pro 64-bit,
June 17, 20178 yr 1 hour ago, Sethos1988 said: Like the 253 I recommended for his 4-core, you could try 4093. Again, just uses all your cores except the first logical core. AM to your suggestion and everything looks great. The CPU core usage also looks great.. Thank you.. AM 4096 Svein T Multi Crew script and checklist
June 17, 20178 yr Just keep an eye on the last several cores (logical or physical) and make sure they're not binding. If they do so every now and then and only for a short amount of time (i.e. no more than 10 seconds), you're fine. If they do bind for over that, it's an indication that terrain and scenery paging may become backlogged, hence blurries. If AMs don't work then it may be time to back off the settings... or buy two 7700ks and wire them in parallel... On a related note, Steve Waite here has written volumes on the subject and while I sometimes get frustrated that his writing doesn't lead to a dumbed-down, actionable "do this and shut up!," find the applicable,er, threads and you'll be all the wiser. Garrett Frank
Archived
This topic is now archived and is closed to further replies.