2 hours ago, fppilot said:

[GNS_430_2.TOGGLE_430]
popleft = 15531

[GNS_530_1.TOGGLE_530]
popleft = 15531

[GNS_430_2.UNPOP_430]
popleft = 15531

[GNS_530_1.UNPOP_530]
popleft = 15531

If there is no other need in each section than using popleft= (i.e. you're not using for example nobezel= for the ones set to the VC gauge instances), you can then collapse 4 to 2:

[GNS_430_2.TOGGLE]
popleft = 15531

[GNS_530_1.TOGGLE]
popleft = 15531

 

[Window07]
gauge00=rxpGNS2!GNS_530_1,0,0,100,62, TOGGLE   
gauge01=rxpGNS2!GNS_430_2,0,62,100,38, TOGGLE    

@fppilot and @bills511

Do you have crossfill setup at all?  I'm not able to get the flight plan to crossfill

8 minutes ago, ryanbatcund said:

@fppilot and @bills511

Do you have crossfill setup at all?  I'm not able to get the flight plan to crossfill

Make sure to have for example; gauge00=rxpGNS2!GNS_530_1, 0, 0,256,187 gauge01=rxpGNS2!GNS_430_2, 0,185,168,73. They have to be unit 1 & 2. Unit 1 would be master device. 2 not master device.

22 minutes ago, bills511 said:

Make sure to have for example; gauge00=rxpGNS2!GNS_530_1, 0, 0,256,187 gauge01=rxpGNS2!GNS_430_2, 0,185,168,73. They have to be unit 1 & 2. Unit 1 would be master device. 2 not master device.

I thought I had 2 set but I didn't hehe....so thanks!

GNS530 V2 For Aerosoft DHC6 Twin Otter extended (tested on P3Dv4)

Panel.cfg

(original lines are put in comments with // )

Quote

//[Window03]
//Background_color=0,0,0 
//size_mm=479,355
//window_size=0.25,0.33
//window_pos= 0.740,0.035 
//visible=0
//ident=34567

//gauge00=TW_GPS!GPS_530frame2D,  0,0,479,355
//gauge01=TW_GPS!GPS_530view2D, 78,29,330,248

[Window03]
window_pos=0.739583,0.000000
window_size=0.260417,0.300000
visible=0
ident=15531
zorder=99
gauge00=rxpGNS2!GNS_530_1,0,0,100,100

[VCockpit01]
file=$DHC6VIRTGAUGES.bmp
Background_color=0,0,0 
size_mm=512, 512
visible=1
pixel_size=512, 512
texture=$DHC6VIRTGAUGES

gauge00=TW_system!TW_Sys1, 0, 0, 1, 1
gauge01=TW_system!TW_Sys2, 0, 0, 1, 1
gauge02=TW_system!TW_Sys3, 0, 0, 1, 1
gauge03=TW_system!TW_Ap, 0, 0, 1, 1
gauge04=TW_system!TW_Ann, 0, 0, 1, 1
gauge05=TW_system!TW_FDR, 0, 0, 1, 1
gauge06=TW_System!TW_State, 0, 0, 1, 1
gauge07=TW_System!Twot_vibr, 0, 0, 1, 1
gauge08=ASC!MAIN, 0,0, 10, 10, 0
gauge09=TW_Disp!Com_Nav_Disp, 345, 4, 162, 218
//gauge10=TW_GPS!GPS_530vc3D, 4,4,332,248
gauge10=rxpGNS2!GNS_530_1, 4, 4, 332, 248,VC_settings
gauge11=TW_Disp!DME, 8, 298, 357, 70
gauge12=TW_Disp!ADF, 8, 378, 475, 53
gauge13=TW_Disp!Transp, 8, 441, 457, 64
gauge14=TW_Disp!Clock, 377, 236, 125, 97
gauge15=TW_System!TW_APIAS, 0, 0, 1, 1
gauge16=RXP!GNS530RXPButtons,0,0,1,1

RealityXP.GNS.ini

Quote

[GNS_530_1]
; is the master device if true.
MasterDevice = true
; selects COM/NAV Radios '1' or '2'.
RadiosPair = 1
; uses computer time if true, simulator time otherwise.
ComputerTime = false
; integral lighting percent (0 to 100)
Rheostat.Display = 100
; integral lighting percent (0 to 100)
Rheostat.Buttons = 75
; connects GPS to HSI if true.
LinkHsi = true 
; connects GPS to HSI course if true.
LinkCrs = false
; connects HSI OBS to GPS if true.
LinkObs = false
; connects GPS to VOR if true.
LinkVor = true 
; connects GPS to Autopilot if true.
LinkOto = true 
; connects CDI key to NAV/GPS switch if true.
AutoNavGps = true 
; selects VLOC NAV '1' or '2'. '0' selects same source as 'RadiosPair'.
AutoNavSource = 0
; sets device power source: ALWAYS_ON,AVIONICS_BUS,MAIN_BATTERY
PowerSource = AVIONICS_BUS
; connects GPS to Shadin Air Data computer if true.
UseAirData = true 
; connects GPS to Shadin Fuel Data computer if true.
UseFuelData = true 
; connects GPS to RYAN 9900BX if true.
UseRyanTcad = true 
; sets TCAD sound alerts volume in percent: 0 to 100.
RyanTcadVolume = 50
; connects GPS #1 to GPS #2 if true (both required).
UseCrossFill = false
; enable device failures if true.
UseFailures = false
; uses Simulator GPS commands if true.
UseSimGpsCmds = true 
; sets fuel type: AVGAS,JETA,JETB
FuelType = AVGAS
; sets TAWS type: TERR,TAWS
TawsMode = TERR
; sets TAWS surface: HARD,HARD_SOFT,WATER,ANY
TawsSurface = HARD_SOFT
; TAWS minimum runway length (feet)
TawsMinLength = 40
; sets master sound volume in percent: 0 to 100.
MasterVolume = 100
; selects the CPU running the trainer process: 1 to 32
; 0: last core, -1: automatic.
CpuAffinity = -1
; connects to: 'PFC_STACK','PFC_430','PFC_530' or any '#PID' (#D002 for PFC_430)
; no value connects to first found, 'OFF' disables connection.
HardwareDevice = 
; hardware selector number or -1 to disable.
HardwareIdx = -1
; uses legacy GNS WAAS 3rd party aircraft panel variables (L:Vars).
UseLegacyVars = true
; HSI lateral deviation scale factor.
CdiScale = 1
; HSI vertical deviation scale factor.
GsiScale = 1
; updates Simulator GPS flight plan if true.
LinkSimGps = false
; use legacy mouse (left CCW, right CW, middle Push) (override instances settings)
UseAltMouse = false

[GNS_530_1.VC_Settings]
nobezel = true
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; display mouse tooltips if true.
tooltips = false
; enable mouse clickspots if true, disable if false.
usemouse = true
; auto-resize dimension (width,height)
refsize = 
; left mouse button popup ident  (ex: GPS_PANEL or 225).
popleft = 
; right mouse button popup ident (ex: GPS_PANEL or 225).

[GNS_530_1.DEFAULT]
; show screen only gauge if true.
nobezel = false
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; display mouse tooltips if true.
tooltips = false
; enable mouse clickspots if true, disable if false.
usemouse = true 
; auto-resize dimension (width,height)
refsize = 
; left mouse button popup ident  (ex: GPS_PANEL or 225).
popleft = 
; right mouse button popup ident (ex: GPS_PANEL or 225).
popright = 
; enable alternate click-spots (left CCW, right CW, middle Push) if true.
usealtmouse = false
; adjust brightness (0 to 100)
brightness.bezel = 100
; offset brightness (-100 to +100)
brightness.screen = 0

Into panel folder, create an RXP folder

put inside a xml file named "GNS530RXPButtons.xml"

GNS530RXPButtons.xml :

Quote

<Gauge Name="GNS 530 missing buttons" Version="1.0">

<Element>
     <Select>
      <Value>
   (L:GPS_CDI,bool) if{
   0 (>K:GPS_NEAREST_BUTTON)
   0 (>L:GPS_CDI,bool) }

   (L:GPS_Vnav,bool) if{
   0 (>K:GPS_VNAV_BUTTON)
   0 (>L:GPS_Vnav,bool) }

  (L:GPS_ComNav_select,bool) if{
   0 (>K:GPS_BUTTON1)
   0 (>L:GPS_ComNav_select,bool) }
      
   </Value>
     </Select>
   </Element>
</Gauge>

that's all.

All buttons in VC are working, except long press on CLR to back to default nav.

Carenado 185F updated for P3Dv4.

This AC uses a GPSMAP 295. Swapped out for the GNS 430. Doesn't look too bad but it works.

Replace popup and VC gauge.

Click spot for opening the VC gauge is on the windshield behind the suction cup.

For popup it is the gauge screen.

It is necessary to use the 430 bezel in this case. The 295 buttons disappear when using No_Bezel.

http://

**************************************

[Vcockpit04]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=1024,1024
texture=$Panel_C185_4

gauge00=rxpGNS2!GNS_430_1,  17,77,432,301      New numbers in red.
gauge01=C185!Toggle_GPS,  46,138,294,211

http://

 

14 hours ago, bills511 said:

This AC uses a GPSMAP 295. Swapped out for the GNS 430. Doesn't look too bad but it works.

I love it! Great innovation!  Can you do that for my old British sports car to fit in a modern car radio with CD? LOL!  Everything available is too deep. 

My chuckle here is because the real GNS 430 is almost a foot deep.   Who cares! You've got it there and functional!

16 minutes ago, fppilot said:

I love it! Great innovation!  Can you do that for my old British sports car to fit in a modern car radio with CD? LOL!  Everything available is too deep. 

My chuckle here is because the real GNS 430 is almost a foot deep.   Who cares! You've got it there and functional!

Thanks Frank,

The C185F is one of my favorite bush planes. Was glad to see it updated, so I just had to stick a 430 in there. Had to shrink it a little in the vc or the bezel would bend around the curved corners. But like you said its there and functional and I'm happy.

My favorite bush plane is Bush hawk XP from aerosoft. i just finish to integrate GNS 430 V2. i will post mod tomorrow

Aerosoft Bush Hawk over PAPG (Tongass X), P3DV4.0
(ASP4 + ASCA + Envdir + EnvShade)

VFR Panel

Spoiler

// Maule M7 260C
// Copyright (c) 1999-2005 Microsoft Corporation.  All rights reserved.

[Window Titles]
Window00=GPS
Window01=Payload Calculator
Window02=Realism Settings
Window03=Autopilot

//[Window00]
//size_mm=500,267
//window_size=0.6
//position=7
//visible=0
//ident=MAIN_PANEL
//gauge00=2D_FS9Garmin430!GNS430_nc1,         0,   0, 500, 267

[Window00]
size_mm=500,210
window_size=0.6
visible=0
ident=15431
zorder=99
gauge00=rxpGNS2!GNS_430_1,0,0,500,210

[Window01]
size_mm=800,600
window_size=0.6
position=3
visible=0
ident=Payload_Calculator
gauge00=BHXP_Payload_Calculator!Payload_Calculator,   0,   0, 800, 600

[Window02]
size_mm=629,420
window_size=0.6
position=4
visible=0
BACKGROUND_COLOR=0,0,0
ident=Realism_Settings
gauge00=Bushhawk_XP!RealismSettings,   0,   0, 629, 420

[Window03]
BACKGROUND_COLOR=2,2,2
size_mm=156,48
position=8
visible=0
ident=Autopilot
gauge00=Bendix_King_Radio!Bendix-King Radio AP, 0, 0

[VCockpit01]
size_mm=1024,1024
pixel_size=1024,1024
texture=$Gauges_VC
background_color=0,0,0

gauge00=Bushhawk_XP!BHXP-Systems,        0,   0,   1,   1
gauge01=Bushhawk_XP!GMA340,              0,   0,   1,   1
//gauge02=BHXP_Garmin430!GNS430_nc1,       1, 124, 610, 254
gauge02=rxpGNS2!GNS_430_1,1,124,610,245
gauge03=Bushhawk_XP!ADF,                 8, 384, 600, 116
gauge04=Bushhawk_XP!DME,                 5, 514, 600, 116
gauge05=BHXP_Garmin330!GTX330,           4, 639, 604, 163
gauge06=Bushhawk_XP!RPM,               834,   5, 187, 188
gauge07=Bushhawk_XP!ManifoldPressure,  647,   5, 188, 188
gauge08=Bushhawk_XP!Oil,               836, 381, 188, 191
gauge09=Bushhawk_XP!Clock,             834, 192, 189, 189
gauge10=Bushhawk_XP!FuelGauge,         644, 192, 190, 189
gauge11=Bushhawk_XP!GEM,               614, 381, 220, 220
//gauge12=BHXP_Garmin430!GNS430_nc2,       1, 800, 610, 254

[Default View]
X=0
Y=0
SIZE_X=8192
SIZE_Y=6144

[Views]
VIEW_FORWARD_DIR= 3.0, 0.0, 0.0

Day=255,255,255
Night=255,255,255
Luminous=255,255,255
 

 

IFR Panel

Spoiler

// Maule M7 260C
// Copyright (c) 1999-2005 Microsoft Corporation.  All rights reserved.

[Window Titles]
Window00=GPS
Window01=Payload Calculator
Window02=Realism Settings
Window03=Autopilot

//[Window00]
//size_mm=500,535
//window_size=0.6
//position=7
//visible=0
//ident=MAIN_PANEL
//gauge00=2D_FS9Garmin430!GNS430_nc1,         0,   0, 500, 267
//gauge01=2D_FS9Garmin430!GNS430_nc2,         0, 268, 500, 267

[Window00]
size_mm=500,420
window_size=0.6
visible=0
ident=15431
zorder=99
gauge00=rxpGNS2!GNS_430_1,0,0,500,210
gauge01=rxpGNS2!GNS_430_2,0,211,500,210

[Window01]
size_mm=800,600
window_size=0.6
position=3
visible=0
ident=Payload_Calculator
gauge00=BHXP_Payload_Calculator!Payload_Calculator,   0,   0, 800, 600

[Window02]
size_mm=629,420
window_size=0.6
position=4
visible=0
BACKGROUND_COLOR=0,0,0
ident=Realism_Settings
gauge00=Bushhawk_XP!RealismSettings,   0,   0, 629, 420

[Window03]
BACKGROUND_COLOR=2,2,2
size_mm=156,48
position=8
visible=0
ident=Autopilot
gauge00=Bendix_King_Radio!Bendix-King Radio AP, 0, 0

[VCockpit01]
size_mm=1024,1024
pixel_size=1024,1024
texture=$Gauges_VC
background_color=0,0,0

gauge00=Bushhawk_XP!BHXP-Systems,        0,   0,   1,   1
gauge01=Bushhawk_XP!GMA340,              0,   0,   1,   1
//gauge02=BHXP_Garmin430!GNS430_nc1,       1, 124, 610, 254
gauge02=rxpGNS2!GNS_430_1,1,124,610,245
gauge03=Bushhawk_XP!ADF,                 8, 384, 600, 116
gauge04=Bushhawk_XP!DME,                 5, 514, 600, 116
gauge05=BHXP_Garmin330!GTX330,           4, 639, 604, 163
gauge06=Bushhawk_XP!RPM,               834,   5, 187, 188
gauge07=Bushhawk_XP!ManifoldPressure,  647,   5, 188, 188
gauge08=Bushhawk_XP!Oil,               836, 381, 188, 191
gauge09=Bushhawk_XP!Clock,             834, 192, 189, 189
gauge10=Bushhawk_XP!FuelGauge,         644, 192, 190, 189
gauge11=Bushhawk_XP!GEM,               614, 381, 220, 220
//gauge12=BHXP_Garmin430!GNS430_nc2,       1, 800, 610, 254
gauge12=rxpGNS2!GNS_430_2,1,800,610,245

[Default View]
X=0
Y=0
SIZE_X=8192
SIZE_Y=6144

[Views]
VIEW_FORWARD_DIR= 3.0, 0.0, 0.0

Day=255,255,255
Night=255,255,255
Luminous=255,255,255
 

 

On ‎11‎/‎15‎/‎2017 at 4:21 PM, nirgal76 said:

GNS530 V2 For Aerosoft DHC6 Twin Otter extended (tested on P3Dv4)

Panel.cfg

(original lines are put in comments with // )

RealityXP.GNS.ini

Into panel folder, create an RXP folder

put inside a xml file named "GNS530RXPButtons.xml"

GNS530RXPButtons.xml :

that's all.

All buttons in VC are working, except long press on CLR to back to default nav.

I have no idea why, but the GNS 530v2 installed in my P3dv4 Twotter just by using the RXP dropdown box in the addon menu.  Dumb luck,  I guess

47 minutes ago, vp49p3 said:

I have no idea why, but the GNS 530v2 installed in my P3dv4 Twotter just by using the RXP dropdown box in the addon menu.  Dumb luck,  I guess

this allow to have GNS V2 yes (that's why RXP product are greats,  it's easy to install !), but not all the VC button are working without using this "GNS530RXPButtons.xml"

@nirgal76 Thanks for the twotter config - I'll have to try that!

RealAir Duke Turbine V2 with RXP GPS 500

http://

 

Open up the Turbine Duke V2 Config Panel and setup radios following this layout. Save and Exit.

http://

 

Backup your panel.cfg file. Copy and paste the following contents into panel.cfg. Save and Exit.

Spoiler

// Panel Configuration file
// RealAir Simulations Beechcraft Turbine Duke V2 2014 Update
// Panel and Gauge Programming by Sean Moloney
// Copyright (c) 2014 RealAir Simulations

// ===============================================================================
// IMPORTANT - 'Window01' AND 'Window02' BELOW ARE RESERVED FOR GPS POPUPS AND CAN
// BE OVERWRITTEN BY THE CONFIG PANEL. PLEASE KEEP THIS IN MIND WHEN MANUALLY
// EDITING THIS FILE. IF YOU WANT TO ADD CUSTOM WINDOW ENTRIES, YOU CAN USE ANY
// VALUE FROM 'Window03' TO 'Window 09'.
// ===============================================================================

[Window Titles]
Window00=Main Panel
Window01=RXP GPS500
Window02=Blank

[Window00]
file=2D_Help.bmp
size_mm=1024, 95
position=6
BACKGROUND_COLOR=0,0,0
visible=1
ident=MAIN_PANEL

[Window01]
BACKGROUND_COLOR=0,0,0
size_mm=500,378
position=6
visible=0
ident=15500
window_size= 0.255, 0.340
gauge00=rxpGNS2!GPS_500_1, 0, 0,500,378

[Window02]
size_mm=1,1
position=0
visible=0
ident=15600
BACKGROUND_COLOR=0,0,0
gauge00=RASDuke!Blank, 0, 0, 1, 1

[VCockpit01]
size_mm=1024,1024
pixel_size=1024,1024
texture=$RAS_Duke_CFG
background_color=1,1,1

gauge01=Config!Options, 1020, 1023, 1, 1
gauge02=Config!RealView, 1021, 1023, 1, 1
gauge03=Config!RadioLayout, 1027, 1023, 1, 1

gauge04=RASDuke!InitVars, 1022, 1023, 1, 1
gauge05=RASDuke!1hzCode, 1023, 1023, 1, 1
gauge06=RASDuke!2hzCode, 1024, 1023, 1, 1
gauge07=RASDuke!18hzCode, 1025, 1023, 1, 1

gauge08=RASDuke!NavCom1, 1, 2, 509, 61
gauge09=RASDuke!NavCom2, 1, 64, 509, 61
gauge10=RASDuke!ADF, 4, 127, 332, 49
gauge11=RASDuke!Xpndr, 7, 243, 305, 57
gauge12=RASDuke!Autopilot, 5, 177, 292, 62
gauge13=RASDuke!DME, 4, 305, 256, 46
gauge14=RASDuke!KA285_Annun, 512,2,337,108
gauge15=RASDuke!Annunciator_Turbine, 516, 111, 226, 245
gauge16=RASDuke!Moritz_LCD, 808, 133, 214, 259
gauge17=RASDuke!Fuel_Qty_LCD, 410, 128, 105, 86
gauge18=RASDuke!Master_Warn, 893, 1, 130, 129

// ===============================================================================
// IMPORTANT - 'gauge19'. 'gauge20, 'gauge21', and 'gauge22' BELOW CAN BE OVERWRITTEN
// BY THE CONFIG PANEL. PLEASE KEEP THIS IN MIND WHEN MANUALLY EDITING THIS FILE
// IF YOU WANT TO CHANGE THE GPS ENTRIES AND DON'T WANT THEM OVERWRITTEN IN ANY
// CIRCUMSTANCE THEN CHANGE THE GAUGE NUMBERS. EG - CHANGE 'gauge 19' TO 'gauge22'
// ===============================================================================

gauge19=rxpGNS2!GPS_500_1, 41,660,370,263,NO_BEZEL
gauge20=RASDuke!Blank, 0, 0, 1, 1

gauge21=RASDukeTv2_Sound!Sound, 1,1,2,2, \Sound\RASDukeTv2_Sound.ini
gauge22=RASDuke!Sound_Manager, 1,1,3,3

gauge23=RASDuke!Pressurisation, 1024, 1023, 1, 1
gauge24=Config!ModelOptions, 1020, 1023, 1, 1
gauge25=Config!GNS500BUTTONS, 0, 0, 1, 1

Day=255,255,255
Night=225,117,89
Luminous=200,200,101

[Default View]
X=0
Y=0
SIZE_X=8192
SIZE_Y=6144

 

Open RealityXP.GNS.ini with notepad. Scroll to bottom, add the 2 items highlighted in red. I(f you don't have this file, copy and paste all contents, save as RealityXP.GNS.ini to the main aircraft folder).

Spoiler

[GPS_500_1]
; is the master device if true.
MasterDevice = true
; selects COM/NAV Radios '1' or '2'.
RadiosPair = 1
; uses computer time if true, simulator time otherwise.
ComputerTime = false
; integral lighting percent (0 to 100)
Rheostat.Display = 100
; integral lighting percent (0 to 100)
Rheostat.Buttons = 75
; connects GPS to HSI if true.
LinkHsi = true
; connects GPS to HSI course if true.
LinkCrs = false
; connects HSI OBS to GPS if true.
LinkObs = false
; connects GPS to VOR if true.
LinkVor = false
; connects GPS to Autopilot if true.
LinkOto = true
; connects CDI key to NAV/GPS switch if true.
AutoNavGps = true
; selects VLOC NAV '1' or '2'. '0' selects same source as 'RadiosPair'.
AutoNavSource = 0
; sets device power source: ALWAYS_ON,AVIONICS_BUS,MAIN_BATTERY
PowerSource = AVIONICS_BUS
; sets device power knob switch mode: NONE,DEFAULT_ON,DEFAULT_OFF
PowerKnob = DEFAULT_OFF
; connects GPS to Shadin Air Data computer if true.
UseAirData = true
; connects GPS to Shadin Fuel Data computer if true.
UseFuelData = true
; connects GPS to RYAN 9900BX if true.
UseRyanTcad = true
; sets TCAD sound alerts volume in percent: 0 to 100.
RyanTcadVolume = 50
; connects GPS #1 to GPS #2 if true (both required).
UseCrossFill = false
; enable device failures if true.
UseFailures = false
; uses Simulator GPS commands if true.
UseSimGpsCmds = true
; updates Simulator GPS flight plan if true.
LinkSimGps = false
; saves the active route as a Simulator flight plan if true.
AutoSavePln = true
; use legacy mouse (left CCW, right CW, middle Push) (override instances settings)
UseAltMouse = false
; use legacy GNS WAAS 3rd party aircraft panel variables (L:Vars).
UseLegacyVars = false
; sets fuel type: AVGAS,JETA,JETB
FuelType = AVGAS
; sets TAWS type: TERR,TAWS
TawsMode = TAWS
; sets TAWS surface: HARD,HARD_SOFT,WATER,ANY
TawsSurface = HARD_SOFT
; TAWS minimum runway length (feet)
TawsMinLength = 40
; HSI lateral deviation scale factor.
CdiScale = 1
; HSI vertical deviation scale factor.
GsiScale = 1
; sets master sound volume in percent: 0 to 100.
MasterVolume = 100
; selects the CPU running the trainer process: 1 to 32
; 0: last core, -1: automatic.
CpuAffinity = -1
; connects to: 'PFC_STACK','PFC_430','PFC_530' or any '#PID' (#D002 for PFC_430)
; no value connects to first found, 'OFF' disables connection.
HardwareDevice =
; hardware selector number or -1 to disable.
HardwareIdx = -1
 

[GPS_500_1.DEFAULT]
; show screen only gauge if true.
nobezel = false
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; display mouse tooltips if true.
tooltips = false
; enable mouse clickspots if true, disable if false.
usemouse = true
; enable alternate click-spots (left CCW, right CW, middle Push) if true.
usealtmouse = false
; auto-resize dimension (width,height)
refsize =
; left mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225).
popleft = 15500
; right mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225).
popright =
; adjust brightness (0 to 100)
brightness.bezel = 100
; offset brightness (-100 to +100)
brightness.screen = 0

[GPS_500_1.NO_BEZEL]
popleft = 15500

 

To enable the VC buttons.

Open notepad. Copy and paste the following. Save the file as GNS500BUTTONS.xml place this in the ...\SimObjects\Airplanes\RealAir Duke Turbine V2\panel\Config\ folder.

Important: Enable (Use Simulator GPS Commands) via the GNS configuration panel. (Press and hold the SHIFT key then RIGHT-Click the top edge of the GNS device to open the configuration panel).

Spoiler

<Gauge Name="GPS 500 buttons" Version="1.0">
<!-- Trigger GPS 500 commands -->
<Element>
     <Select>
      <Value>
   (L:mdlZoomOutButton,bool) if{
   0 (>K:GPS_ZOOMOUT_BUTTON)
   0 (>L:mdlZoomOutButton,bool) }
  
   (L:mdlZoomInButton,bool) if{
   0 (>K:GPS_ZOOMIN_BUTTON)
   0 (>L:mdlZoomInButton,bool) }
  
   (L:mdlDTOButton,bool) if{
   0 (>K:GPS_DIRECTTO_BUTTON)
   0 (>L:mdlDTOButton,bool) }
  
   (L:mdlNrstButton,bool) if{
   0 (>K:GPS_NEAREST_BUTTON)
   0 (>L:mdlNrstButton,bool) }
  
   (L:mdlEntButton,bool) if{
   0 (>K:GPS_ENTER_BUTTON)
   0 (>L:mdlEntButton,bool) }
  
   (L:mdlClrButLSingle,bool) if{
   0 (>K:GPS_CLEAR_BUTTON_DOWN)
   0 (>L:mdlClrButLSingle,bool) }
   
   (L:mdlClrButLeave,bool) if{
   0 (>K:GPS_CLEAR_BUTTON_UP)
   0 (>L:mdlClrButLeave,bool) }
  
   (L:mdlMSGButton,bool) if{
   0 (>K:GPS_MSG_BUTTON)
   0 (>L:mdlMSGButton,bool) }
  
   (L:mdlBottomLeftKnob,bool) if{
   0 (>K:GPS_PAGE_KNOB_DEC)
   0 (>L:mdlBottomLeftKnob,bool) }
  
   (L:mdlBottomRightKnob,bool) if{
   0 (>K:GPS_PAGE_KNOB_INC)
   0 (>L:mdlBottomRightKnob,bool) }
  
   (L:mdlTopLeftKnob,bool) if{
   0 (>K:GPS_GROUP_KNOB_DEC)
   0 (>L:mdlTopLeftKnob,bool) }
  
   (L:mdlTopRightKnob,bool) if{
   0 (>K:GPS_GROUP_KNOB_INC)
   0 (>L:mdlTopRightKnob,bool)  }
  
   (L:mdlFPLButton,bool) if{
   0 (>K:GPS_FLIGHTPLAN_BUTTON)
   0 (>L:mdlFPLButton,bool) }
  
   (L:mdlPROCButton,bool) if{
   0 (>K:GPS_PROCEDURE_BUTTON)
   0 (>L:mdlPROCButton,bool) }
   
   (L:mdlOBSButton,bool) if{
   0 (>K:GPS_OBS_BUTTON)
   0 (>L:mdlOBSButton,bool) }
  
   (L:mdlMenuButton,bool) if{
   0 (>K:GPS_MENU_BUTTON)
   0 (>L:mdlMenuButton,bool) }
         </Value>
     </Select>
   </Element>
</Gauge>

********************End********************

 

Here's a mod to get the GNS530 V2 in the Baytower RV7 with working clickspots (P3D only - not tested in anything else).  It also addresses the inop gtx327 (that would usually crash P3D v4).  Credits also to Bert Pieke for the gtx327 mod and initial clickspot coding!

Place the rxp ini in the Vans_RV7 root folder and the rest in the panel.RV7_tip folder (backup originals).

FILE: https://www.dropbox.com/s/8uikmdvduo2p4i0/RXPGNSv2mod_panel.RV7_tip.zip?dl=0

It's then easy to make your own config for the rest of the variants.

Untitled-1 by ryan b, on Flickr

Edited June 11, 20187 yr by RXP