Ah ok, I see what these installers change on *some* of these Alabeo and Carenado planes, they simply remove the default GPS gauge and 3D GPS bezel so the VNAV button is labeled correctly on the RXP units.

Here's my "obsessive compulsive" alignment of the RXP GNS 530-430 stack for the Carenado Centurion T210.

This version requires you to install the file named RXP530-RXP430.exe  in your IE: "Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\Carenado Centurion T210" Directory and you *MUST* have a license for both the RXP530 version 2 and the RXP430 version 2. However, Carenado never bothered to fix a major bug with that installer, it causes a DME gauge to be deleted for some strange reason so I included it below in [Vcockpit02].

[Vcockpit01]
Background_color=0,0,0
size_mm=256,256
visible=0
pixel_size=1024,1024
texture=$C530_GPS

gauge00=rxpGNS2!GNS_530_1, 0, 0,256,187
gauge01=rxpGNS2!GNS_430_1, 0,185,168,73

//-------------------------------------------------------------------------------------

[Vcockpit02]
Background_color=0,0,0
size_mm=512,512
visible=1
pixel_size=1024,1024
texture=$RadiosC114

gauge00=RadioC210!RadioAudio,  0,0,297,57
gauge01=RadioC210!Radio_KR87_ADF,  0,321,300,75
gauge02=DigTrans!transponder,  0,166,297,74
gauge03=APBK!Autopilot,  0,242,297,78
gauge04=DME!DME_screen,  302,212,210,82
gauge05=CCTC!Temp,  334,338,150,150
gauge06=CCTC!Oxygen,  3,398,115,114
gauge07=CCTC!Gear_light_red,  124,463,40,40
gauge08=CCTC!Gear_light_green,  124,419,40,40
gauge09=CCTC!Panel_annunciator,  301,114,207,93
gauge10=CCTC!Test_Light,  181,461,40,40
gauge11=CCTC!ELT_Light,  181,416,40,40
gauge12=CCTC2!ALTqnh,  490,0,20,20

 

Does anyone have the GNS530 in the Alabeo Ovation?

8 hours ago, Caribpilot said:

Does anyone have the GNS530 in the Alabeo Ovation?

I have it installed. What's your concern?

7 hours ago, bills511 said:

I have it installed. What's your concern?

I replaced the gauge name with the new RXP gauge but some of the text on the lower part of the display was cut off. I was wondering if anyone got a "perfect fit" ?

Try these values. (highlighted)

//--------------------------------------------------------
[Vcockpit01]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=512,512
texture=$Panel_1

gauge00=rxpGNS2!GNS_530_1, 0, 0,512,372
gauge01=M20RALA!ToggleCAR530,     64,0, 256, 32

//--------------------------------------------------------

Those are the values I'm using also. The lower part of the display which shows GPS/VLOC etc is cut off slightly

58 minutes ago, Caribpilot said:

Those are the values I'm using also. The lower part of the display which shows GPS/VLOC etc is cut off slightly

Change the value 372 to about 370 or less.

It will take some trial and error.

The first zero - 0, position left to right. 0, position up and down 512, width dimension & 372 height dimension.

 

I have tried on the A2A Cessna 182, where is the panel.cfg?

Million thanks!

53 minutes ago, velez66 said:

I have tried on the A2A Cessna 182, where is the panel.cfg?

Million thanks!

In P3Dv4 C:\Users\****\Documents\Prepar3D v4 Add-ons\A2A\SimObjects\Airplanes\A2A_C182\panel

19 hours ago, bills511 said:

In P3Dv4 C:\Users\****\Documents\Prepar3D v4 Add-ons\A2A\SimObjects\Airplanes\A2A_C182\panel

Thanks a lot! bill511 Going to try again tonight.

Has anyone been able to install the GNS430 in the PMDG DC-6?

Here is the panel.cfg for The Carenado C210.

Dual unit setup GNS 430/530. This setup adds a popup for the 430. Popups load in the lower left corner. To open popups click top border of bezel of each unit. To close click in unit screens. All buttons and knobs work in VC.

Spoiler

//*********************************************************
// CARENADO CT210M Centurion II FSX
// Copyright © Carenado 2011 - All Rights Reserved
//*********************************************************

[Window Titles]
Window00=Reality XP GNS 530
Window01=Manual
Window02=Control Windows
Window03=INFO
Window04=Reality XP GNS 430

//--------------------------------------------------------
[Window00]
Background_color=255,255,255
size_mm=520,378
window_size_ratio=1.000 
position=0
visible=0
ident=794
window_size= 0.255, 0.340
window_pos= 0.000, 0.459
zorder=15

gauge00=rxpGNS2!GNS_530_1,  0,0,520,378
gauge01=CCTC!Toggle_GPS,  87,28,348,260

//--------------------------------------------------------
[Window01]
Background_color=0,0,0
size_mm=1000,1000
window_size_ratio=1.000 
position=0
visible=0
ident=793
window_size= 0.440, 0.773
window_pos= 0.520, 0.040
zorder=0

gauge00=T210MManual!manual,  0,0,1000,1000

//--------------------------------------------------------
[Window02]
Background_color=0,0,0
size_mm=581,153
window_size_ratio=1.000 
position=0
visible=0
ident=796
window_size= 0.321, 0.150
window_pos= 0.020, 0.170
zorder=5

gauge00=CCTC!Control_windows,  0,0,581,153

//--------------------------------------------------------
[Window03]
file=info.bmp
size_mm=345,157
window_size_ratio=1.000 
position=0
visible=1
ident=142
window_size= 0.161, 0.116
window_pos= 0.020, 0.040

//--------------------------------------------------------
[Window04]
Background_color=0,0,0
size_mm=100,100
position=0
visible=0
ident=10010
window_size= 0.255, 0.199
window_pos= 0.000, 0.801
zorder=99

gauge00=rxpGNS2!GNS_430_1,  0,0,100,100
gauge01=C90KA!ToggleCAR430,  12,35,73,31

//--------------------------------------------------------
[Vcockpit01]
Background_color=0,0,0
size_mm=256,256
visible=0
pixel_size=1024,1024
texture=$C530_GPS

gauge00=rxpGNS2!GNS_530_1,  0,0,256,184
gauge01=rxpGNS2!GNS_430_1,  0,185,169,71
gauge02=CCTC!Toggle_GPS,  21,0,208,10
gauge03=C90KA!ToggleCAR430,  16,186,137,11

//--------------------------------------------------------
[Vcockpit02]
Background_color=0,0,0
size_mm=512,512
visible=1
pixel_size=1024,1024
texture=$RadiosC114

gauge00=RadioC210!RadioAudio,  0,0,297,57
gauge01=RadioC210!Radio_KR87_ADF,  0,321,300,75
gauge02=DigTrans!transponder,  0,166,297,74
gauge03=APBK!Autopilot,  0,242,297,78
gauge04=DME!DME_screen,  302,212,210,82
gauge05=CCTC!Temp,  334,338,150,150
gauge06=CCTC!Oxygen,  3,398,115,114
gauge07=CCTC!Gear_light_red,  124,463,40,40
gauge08=CCTC!Gear_light_green,  124,419,40,40
gauge09=CCTC!Panel_annunciator,  301,114,207,93
gauge10=CCTC!Test_Light,  181,461,40,40
gauge11=CCTC!ELT_Light,  181,416,40,40
gauge12=CCTC2!ALTqnh,  490,0,20,20

Day=255,255,255
Night=255,255,255
Luminous=201,64,64

[Default View]
X=0
Y=0
SIZE_X=8192
SIZE_Y=3500

http://

This is a quick and dirty config for the Carenado Cheyenne III, just released.  It's for the GNS530W.  

1) Run the GNS panel exe in the Cheyenne directory

2) Backup original rxp ini file and replace with the one in this zip

3) Open the panel cfg (back it up per usual) and make line changes (see file)

https://www.dropbox.com/s/c3uum0h0tmifq9d/RXP_GNS530Wv2_PA42.zip?dl=0

The sizing isn't perfect for the gauge.  Is the new v2 gauge a different size just a little?  I don't know.  Therefore the VC clickspots don't perfectly line up but they are fine and usable for me.  For the 2d popup just click the top of the VC gauge bezel.  One could probably run the 2d popup config via the new RXP in-sim app  - to get a better sized poup, but meh.

On 11/2/2017 at 4:30 PM, bills511 said:

Here is the panel.cfg for The Carenado C210.

Dual unit setup GNS 430/530. This setup adds a popup for the 430. Popups load in the lower left corner. To open popups click top border of bezel of each unit. To close click in unit screens. All buttons and knobs work in VC.

I see that you are using various Carenado-provided Toggle_GPS gauges to control limited clickspots for popping 2D gauges up and back.  I found a cleaner way provided by RXP (after a bit of a learning curve).  It involves adding some additional sections to the end of the RealityXP.GNS.ini file, then adding references to those sections as 5th parameter values to the gauges in the [Window##] and [VCockpit##] instances of the gauges in the panel.cfg file. 

And one more step is needed. The Centurion T210's instrument reflections must be disabled either in the T210's popup Control Window (shift-3), or by using a simple .xml gauge I believe provided to me several years ago by Bert P.

http://

The method below creates the entire display screen of each of the two RXP GNSv2 gauges in the VC, and also creates one popup for both gauges and uses as clickspots the entire display screens of the gauges in the 2D popup to close the 2D popup.

 

From my RealityXP.GNS.ini file are these four new Sections added at the bottom. NOTE: the value given to "popleft =" is the same value for all four Sections, and the same value MUST be used for the  "ident = "  entry in the appropriate [Window##] in the panel.cfg file.

[GNS_430_2.TOGGLE_430]
popleft = 15531

[GNS_530_1.TOGGLE_530]
popleft = 15531

[GNS_430_2.UNPOP_430]
popleft = 15531

[GNS_530_1.UNPOP_530]
popleft = 15531
=====================================================

Then here is how the panel.cfg  [Window##]  and  [VCockpit##]  are set up. I commented (//) out the original 4-parameter lines to show how they look compared to the lines with the 5th parameter values added.

[Window07]
size mm=400, 480
window_pos=0.79000,0.48000
window_size=0.20507,0.49275
visible=1
zorder=99

ident=15531
//gauge00=rxpGNS2!GNS_530_1,0,0,100,62    
//gauge01=rxpGNS2!GNS_430_2,0,62,100,38

gauge00=rxpGNS2!GNS_530_1,0,0,100,62, UNPOP_530    
gauge01=rxpGNS2!GNS_430_2,0,62,100,38, UNPOP_430    

//--------------------------------------------------------
[Vcockpit01]
Background_color=0,0,0 
size_mm=256,256
visible=0
pixel_size=1024,1024
texture=$C530_GPS

//gauge00=rxpGNS2!GNS_530_1  ,0,  0,256,184
//gauge01=rxpGNS2!GNS_430_2  ,0,185,169, 71

gauge00=rxpGNS2!GNS_530_1  ,0,  0,256,184, TOGGLE_530
gauge01=rxpGNS2!GNS_430_2  ,0,185,169, 71, TOGGLE_430

gauge02=Controls!IR_Off, 0,0,1,1     ;; to use this you MUST create this gauge using the instructions below.

============================================================

Then if you wish to have the Centurion T210's Instrument Reflections set to Off as the default, take the following text and copy and paste it into Notepad  or other text editor, save the file as "IR_Off.XML", then place it in a subfolder named "Controls"  to the C210's panel folder. (.....Airplanes/Carenado Centurion T210/panel/controls):

 

<?xml version="1.0"?>

-<Gauge Version="1.0" Name="IR_off">

<!-- No instrument Reflections -->

-<Element>

-<Select>

<Value> (L:InitIR,bool) ! if{ 1 (>L:WINDOWSTINTBOOL2,bool) 1 (>L:InitIR,bool)} </Value>

</Select>

</Element>

</Gauge>