FlyTampa's Las Vegas (KLAS) now available!

[chapstick 2,763]

The ILS hotfix is now posted in the FlyTampa forum, btw.

Edited April 26, 2019 by Chapstick

[Nyxx 6,994]

13 minutes ago, Chapstick said:

The ILS hotfix is now posted in the FlyTampa forum, btw.

Thanks for the HU Alex.

[Nyxx 6,994]

On route from KSFO,

[newtie 541]

14 hours ago, ZKOKQ said:

Available from the Pilots web site. An exclude tool for Global mesh. I had to use it for KLAS.

From there web site: "AFM2 will take care of Vector AEC airports. Meaning: It will detect Vector installed and also, if you have enabled or disabled a possible AEC fo the very airport you want to install an AFM for. This also means, IF you newly enable or disable an AEC via your Vector Configurator for which you already have installed an AFM for, you MUST deinstall the AFM and install it again to switch to the other version."

Log into your a/c or sign up and download. It maybe in your simmarket a/c if you purchased at SM

Tried it no luck; still have the trenches. Turn FSGlobal off and everything is fine. I posted over at FT as there are many of us with this problem. Hopefully a fix at some time. Great airport regardless. FT is up there with Flightbeam.

[simaddict 46]

Here's how I fixed the elevation issue. Easy, and all is perfect now:

Open the FTX Vector Control panel, go to Airport Elevation Corrections and click the Run Auto-Configuration tab. Let it run, takes awhile. Then, open P3D and go to KLAS. Things will be all messed up(elevation). Then, close P3D. Go back to   FTX Vector Control panel, Airport Elevation Corrections, look for KLAS on the "enabled" side(left) then click the DISABLE for that airport.

Everything is awesome now, what an amazing add on!! Feels like being there!! WOW!!!  

[Wise87 1,291]

For me and other its a FSGlobal issue and not an Orbix issue. 

East of 26 R/L 

[newtie 541]

1 hour ago, simaddict said:

Here's how I fixed the elevation issue. Easy, and all is perfect now:

Open the FTX Vector Control panel, go to Airport Elevation Corrections and click the Run Auto-Configuration tab. Let it run, takes awhile. Then, open P3D and go to KLAS. Things will be all messed up(elevation). Then, close P3D. Go back to   FTX Vector Control panel, Airport Elevation Corrections, look for KLAS on the "enabled" side(left) then click the DISABLE for that airport.

Everything is awesome now, what an amazing add on!! Feels like being there!! WOW!!!  

I'm not using Vector.

[newtie 541]

26 minutes ago, Wise87 said:

For me and other its a FSGlobal issue and not an Orbix issue. 

East of 26 R/L 

Correct.

[Nuno Pinto 1,443]

Anything i can use to replace Addon Manager airports is money well spent.

[Jedi928 6]

How about compatibility with megasceneryearth nevada 2.0?

[ZKOKQ 986]

7 hours ago, newtie said:

Tried it no luck; still have the trenches. Turn FSGlobal off and everything is fine. I posted over at FT as there are many of us with this problem. Hopefully a fix at some time. Great airport regardless. FT is up there with Flightbeam.

Yes, I thought I had fixed it with AFMS2, but just checked again and problem still exists, just not so bad. It looks horrible none the less. So like you, will disable NA Mesh for now.

[ChrisDa 41]

If you have Pilots mesh 2018 or 2018 Ultimate turn off DX017019.bgl in the NAM folder under FSGU_NG, by re naming it to DX017019.bgl.off.

That fixed it for me.

Chris.

 

 

[ZKOKQ 986]

1 minute ago, ChrisDa said:

If you have Pilots mesh 2018 or 2018 Ultimate turn off DX017019.bgl in the NAM folder under FSGU_NG, by re naming it to DX017019.bgl.off.

That fixed it for me.

Chris.

 

 

Cheers, thanks Chris

[ZKOKQ 986]

10 hours ago, tttocs said:

The latest round of MSE v3 products in the SW have really taken things up a notch as well.  Much better color matching and clarity.

Excellent. Just downloading the latest version. On sale too, so was cheap as chips.

[Wise87 1,291]

Looks like the found the issue with FSGU and will have a fix in a few days.