Everyone should upgrade, performing a full un-install re-install of the new version and not use the patch

Thank you

 

Thanks, Just one small question:

If I uninstall, I’ll loose the MCE speech training? Or it is a Windows thing that will stay?

16 minutes ago, Wailbal said:

Thanks, Just one small question:

If I uninstall, I’ll loose the MCE speech training? Or it is a Windows thing that will stay?

Hi, Wailbal. I've had MCE for years, and you always have to uninstall the previous version first or you can't continue. Never had a problem. If it does call for speech training again, takes 30 seconds!

Thanks,

Mike 

24 minutes ago, simaddict said:

Hi, Wailbal. I've had MCE for years, and you always have to uninstall the previous version first or you can't continue. Never had a problem. If it does call for speech training again, takes 30 seconds!

Thanks,

Mike 

Thanks Mike

2 hours ago, Wailbal said:

Thanks, Just one small question:

If I uninstall, I’ll loose the MCE speech training? Or it is a Windows thing that will stay?

No need for speech training.

Speech profile is managed by Windows and only lost when you format C drive or delete your user account from your system.

This update is for Prepar3D, FSX and FS9 MCE package.

If you wish, you no longer need to run the sim as administrator from now on.

Edited March 27, 20206 yr by FS++

Good job I was able to find a back up of my serial number on an external drive! Pretty sure I bought MCE from flightsimstore.com or one of those other online stores which went 'boom' a while back and took our purchase history records down with them. That would have been fun trying to find that serial number 🤣

I've just reinstalled MCE 2.8.3.8 and it no longer recognizes my Aerosoft CRJ-700 Pro aircraft.  It defaults to the Bombardier_CRJ_700 and of course does not execute any command.  Help?

26 minutes ago, DWadsworth said:

I've just reinstalled MCE 2.8.3.8 and it no longer recognizes my Aerosoft CRJ-700 Pro aircraft.  It defaults to the Bombardier_CRJ_700 and of course does not execute any command.  Help?

FSX or P3D V4?

 

Sorry, P3D V4.5.  

6 minutes ago, DWadsworth said:

Sorry, P3D V4.5.  

Go to \Prepar3D v4\ main installation folder and check you have a folder named <MCE dlls> with about 40+ dlls inside it.

Normally, the installer puts that folder there.

If you put it manually by copying folder from downloaded file, delete it and e-install MCE.

If folder is missing, go to downloaded unzipped file and look under \Resources\Files\FSX\ folder.

Copy <MCE dlls x64> folder to \Prepar3D v4\ folder then rename it to <MCE dlls>.

If aircraft not recognized, please post [fltsim.X] section found in "aircraft.cfg folder for the Aerosoft CRJ-700 pro.

Thanks.

 

Thanks for the quick response.

 

MCE dlls folder exists and contains mcasoftCRJ.dll data 10/12/2018 107 kb,

[fltsim.11]
title=CRJ700 Pro United Express N770SK
sim=CRJ700_AMM
model=
panel=
sound=
texture=SKW_N770SK
kb_checklists=BombardierCRJ700_check
kb_reference=BombardierCRJ700_ref
atc_id=N770SK
atc_airline=SKYWEST
atc_parking_types=GATE,RAMP
ui_manufacturer="Bombardier"
ui_type="CRJ700"
ui_variation="United Express/SkyWest"
ui_typerole="Regional Jet"
ui_createdby="Aerosoft/Digital Aviation"
description="The CRJ (Canadair Regional Jet) family of aircraft was derived from the Canadair Challenger business jet, which began its operational life as the LearStar 600. The Bombardier Canadair CRJ700, which entered service in 2001, is a stretched version of the CRJ100/200 regional jet, with increased seating capacity from 50 to 70. With increased length and upgraded landing gear, the CRJ700 features a longer wing span and leading edge slats. Like other members of the CRJ family, the CRJ700 features an electronic flight instrument system (EFIS) avionics suite and “glass cockpit” instrumentation."
category=airplane

30 minutes ago, DWadsworth said:

Thanks for the quick response.

 

MCE dlls folder exists and contains mcasoftCRJ.dll data 10/12/2018 107 kb,

[fltsim.11]
title=CRJ700 Pro United Express N770SK
sim=CRJ700_AMM
model=
panel=
sound=
texture=SKW_N770SK
kb_checklists=BombardierCRJ700_check
kb_reference=BombardierCRJ700_ref
atc_id=N770SK
atc_airline=SKYWEST
atc_parking_types=GATE,RAMP
ui_manufacturer="Bombardier"
ui_type="CRJ700"
ui_variation="United Express/SkyWest"
ui_typerole="Regional Jet"
ui_createdby="Aerosoft/Digital Aviation"
description="The CRJ (Canadair Regional Jet) family of aircraft was derived from the Canadair Challenger business jet, which began its operational life as the LearStar 600. The Bombardier Canadair CRJ700, which entered service in 2001, is a stretched version of the CRJ100/200 regional jet, with increased seating capacity from 50 to 70. With increased length and upgraded landing gear, the CRJ700 features a longer wing span and leading edge slats. Like other members of the CRJ family, the CRJ700 features an electronic flight instrument system (EFIS) avionics suite and “glass cockpit” instrumentation."
category=airplane

Thanks.

With Aeosoft CRJ loaded and MCE running, go to <Command> tab and click <Voxscript> button.

Do you see any pe-made flows there?

Try running "prepar3D.exe" as administrator.

 

The MCE display is now showing Bombardier CRJ-700, which is different than before.  Command/VoxScript shows the expected existing scripts.  

Command are being understood by MCE but no actions are taken.  The Safety Check Flow ran to the end, but no changes to the panels were made.  Same with Set Nav Lights On or Set Dome Light On.  MCE did respond if the switch was already in the commanded position.

I've reproduced the problem when starting MCE using SimStarter or from the desktop.

P3d and MCE are being run as administrators.   

 

 

34 minutes ago, DWadsworth said:

The MCE display is now showing Bombardier CRJ-700, which is different than before.  Command/VoxScript shows the expected existing scripts.  

Command are being understood by MCE but no actions are taken.  The Safety Check Flow ran to the end, but no changes to the panels were made.  Same with Set Nav Lights On or Set Dome Light On.  MCE did respond if the switch was already in the commanded position.

I've reproduced the problem when starting MCE using SimStarter or from the desktop.

P3d and MCE are being run as administrators.   

 

 

Are you by any chance running P3D with some workarounds like renaming "Prepar3D.exe" as "fsx.exe" or other tricks to accommodate non native add-ons?

Go to Prepar3D installation folder and report fsInsider64.dll version.

 

No work-arounds to the .exe file.

FsInsider64.dll: File version 2..8.3.8 Product version 2.8.3.8.  Date modified 3/17/2020 12:03 PM 569,344 bytes

 

[OPTIONS]
Debug=0
DialogReference=0
KeepLVLDcopilot=0
KeepCSDC9copilot=0
RestFocusOnJoysticZoom=0
UseAlternateDllLoad=0
MCEStartDelay=30
NoTranslateAtc=0
AtcPTT=46
VatsimPTT=0
AssumeSimVersion=0
AssumeOSversion=0
Func1Param=5
Func2Param=5
FsxPrintParam=6
NoEventForward=0
MonitorVatsimPanels=0
DisableLinkage=0
AppendVASinfo=1
CheckAdminStatus=1
ShutdownRC4OnExit=0
ShutdownPFEOnExit=0
KeepWin7AeroDisabled=0
EnableGSXsupport=0

[Other]
AgreedToNGXEula=1

[Prepar3D]
GBordinal=24
ReduceAtcFlicker=0
AtcWinLeft=0
AtcWinTop=60
AtcWinWidth=220
AtcWinHeight=60

[SHUTDOWN]
AddonTitle1=
AddonTitle2=
AddonTitle3=
AddonTitle4=
AddonTitle5=
AddonTitle6=