July 20, 20214 yr All of a sudden I can't take off. I have the honeycomb Yoke and Bravo Throttle Quad. I noticed that when I'm on the ground and test the control surfaces. When I pull back the elevator goes up and snaps right back to center. If I push in the elevator goes down and then snaps right back to center. checked the profile and everything seems to be ok. Any ideas why this is happening, Thanks Walt Walt Popowski
July 20, 20214 yr Do you have any other hardware that might also be bound to the elevator? Does it happen to all aircraft? Eric i9-12900k, RTX 5070ti OC, 32GB ddr5 5600 RAM, 2TB 980 Pro SSD, Titan 240RX AIO, Samsung CRG90 49", Win 11
July 20, 20214 yr 37 minutes ago, waltpop said: All of a sudden I can't take off. I have the honeycomb Yoke and Bravo Throttle Quad. I noticed that when I'm on the ground and test the control surfaces. When I pull back the elevator goes up and snaps right back to center. If I push in the elevator goes down and then snaps right back to center. checked the profile and everything seems to be ok. Any ideas why this is happening, Thanks Walt Take a look at your settings in MSFS and post what you have assigned to the elevator for the Alpha yoke. Sometimes setting(s) for a device may seem intuitive but may not be the correct choice. Also check your setting for autopilot functions on both devices. It may be an autopilot function is active and overriding your attempts. Edited July 20, 20214 yr by fppilot Frank Patton Corsair 5000D Airflow Case; MSI B650 Tomahawk MOB; Ryzen 7 7800 X3D CPU; ASUS RTX 4080 Super; NZXT 360mm liquid cooler; Corsair Vengeance 64GB DDR5 4800 MHz RAM; RMX850X Gold PSU;; ASUS VG289 4K 27" Display; Honeycomb Alpha & Bravo, Crosswind 3's w/dampener. Former USAF meteorologist & ground weather school instructor. AOPA Member #07379126 "I will never put my name on a product that does not have in it the best that is in me." - John Deere
July 21, 20214 yr Author 15 hours ago, Flic1 said: Do you have any other hardware that might also be bound to the elevator? Does it happen to all aircraft? 15 hours ago, fppilot said: Take a look at your settings in MSFS and post what you have assigned to the elevator for the Alpha yoke. Sometimes setting(s) for a device may seem intuitive but may not be the correct choice. Also check your setting for autopilot functions on both devices. It may be an autopilot function is active and overriding your attempts. 15 hours ago, fppilot said: Take a look at your settings in MSFS and post what you have assigned to the elevator for the Alpha yoke. Sometimes setting(s) for a device may seem intuitive but may not be the correct choice. Also check your setting for autopilot functions on both devices. It may be an autopilot function is active and overriding your attempts. 15 hours ago, fppilot said: Take a look at your settings in MSFS and post what you have assigned to the elevator for the Alpha yoke. Sometimes setting(s) for a device may seem intuitive but may not be the correct choice. Also check your setting for autopilot functions on both devices. It may be an autopilot function is active and overriding your attempts. -This is driving me nuts. Elevator in the yoke is assigned to the elevator Axis, nothing else assigned to it. Auto pilot not on and it still does it. Pull up on the yoke, elevator goes up for about 2-3 seconds and drops back down to center. Push forward, elevator goes down for a few seconds and pops back up to center. Changed the yoke to the default selection and it still does it. The last thing I did before this started to happen was to adjust the rudder pedal sensitivity to less. But that should not have anything to do with the elevator, at least not from the rudder pedals. There has to be something right in front of my face and I'm just not seeing it. Tried different planes to see if it happens to them too and it does, same problem. One of my awesome follow pilots will pull through for me I hope. Anyways I wish all of you Happy flying, I'll be up soon I hope. And thanks, hope to hear of a solution soon. Walt Walt Popowski
November 24, 20214 yr Did you ever resolve this issue? It’s been happening to me lately. Plane can be Cold and dark or powered up. Doesn’t matter.
November 24, 20214 yr Try to reassign it. Delete elevator axis and assign again. Intel Core i9 13900K, NVidia RTX 4090 FE, Corsair Vengeance DDR5 64GB@6000MHz, Samsung 990 Pro 2TB NVMe M2, Asus OLED PG42 UQ
November 24, 20214 yr I had an issue with elevator trim wheel fighting me and returning to a position. Turns out the latest SU7 had enabled all the auto assists including auto trim Varjo Aero, 5090 FE, i9-12900K, 64GB Ram, RX Viper Rudder Pedals, AuthentiKit Controls + Fulcrum Yoke
November 25, 20214 yr Well now the elevator is working but the ailerons are having the issue. They snap back instantly. Has to be a bug
November 25, 20214 yr Su7 put all assist to easy. Change it back to true to,life https://fsprocedures.com Your home for all flight simulator related checklist.
Archived
This topic is now archived and is closed to further replies.