August 29, 20223 yr All, Had my Buttkicker for years and it was working fine with MSFS202 until recently .It works with the Realtek Audio Manager with all 5,1 speakers working as they should, including the subwoofer and the Buttkicker. No joy however in MSFS 2020 I cannot recall altering anything in the Audio settings. Can anyone help out?? Thank You Nic
August 29, 20223 yr I had two buttkickers where the inline cable connector failed. I cut off the connectors and spliced the wires together and they both work fine after that. LouP
August 29, 20223 yr My original buttkicker just burned out one day about 6 months ago. Shaker melted (almost). I did get my monies worth. It was about 4 years old. Intel(R) Core(TM) i7-10700F CPU @ 2.90GHz (8 cores) Hyper on, Evga RTX 3060 12 Gig, 32 GB ram, Windows 11, P3D v6, and MSFS 2020 and a couple of SSD's
August 30, 20223 yr If its working normally with other programs/music without clipping or going into protection mode then its not a shaker,cable,amplifier or soundcard issue (ie Hardware) Assuming your on PC then in MSFS you would need to check if your main sound output device matches with what you have selected as your output device on the pc. If they all match then we will need more info on your setup (second soundcard etc etc)
August 31, 20223 yr Author Guys All sound outputs match tests fine in Realtek Audio Manager (AC 97 Onboard sound) as before with all speakers where they should be in relation to sound, also ran trouble shooting in Windows settings page and tested once again all working as advertised. However played YouTube music no vibration, also tried Re-entry an orbital simulator no luck there either, so so I am at a bit of a loss. Checked manuals and positive I have everything right??? Regards
August 31, 20223 yr Author Think I have sorted a missing tick in the Realtek Audio Manager. Thanks for all the help guys. Regards
November 7, 20223 yr Hi, how did the error manifest in your case? My BK2 has worked fine about year ago. After a longer break I tried to use it again, but the red on/off light stays red. I can hear the click inside the box when I press the on/off button though. It is connected via an USB Sound Blaster G1 and the Sound Module is set to use it. (even playing just music through the G1 enabled as sound device doesn't wake the BK2 up). Any suggestions? Thanks!
November 7, 20223 yr 35 minutes ago, Mark1616 said: Hi, how did the error manifest in your case? My BK2 has worked fine about year ago. After a longer break I tried to use it again, but the red on/off light stays red. I can hear the click inside the box when I press the on/off button though. It is connected via an USB Sound Blaster G1 and the Sound Module is set to use it. (even playing just music through the G1 enabled as sound device doesn't wake the BK2 up). Any suggestions? Thanks! Call them they will send you a new unit. CPU: Intel i9-11900K @5.2 / RAM: 64GB DDR4 3200 / GPU: 4080 16GB /
November 7, 20223 yr Just made a flight from Amsterdam to Istanbul. The Buttkicker 2 worked just fine ( using OpusFSI). 5950x3d 5.4-5.7 GHz - Asus ROG 870 Crosshair Apex - GSkill Neo 2x 24 Gb 6000 mhz / cas 26 - MSI RTX 5090 Gaming Trio OC - 1x SSD M2 6000 2TB - 1x SSD M2 2800/1800 1Tb - Corsair 5400 case - Corsair 360 liquid cooling set - 3x 75’ TCL tv. 13600 6 cores @ 5.1 GHz / 8 cores @ 4.0 GHz (hypterthreading on) - Asus ROG Strix Gaming D - GSkill Trident 4x Gb 3200 MHz cas 15 - Asus TUF RTX 4080 16 Gb - 1x SSD M2 2800/1800 2TB - 2x Sata 600 SSD 500 Mb - Corsair D4000 Airflow case - NXT Krajen Z63 AIO liquide cooling - FOV : 200 degrees My flightsim vids : https://www.youtube.com/user/fswidesim/videos?shelf_id=0&sort=dd&view=0
Archived
This topic is now archived and is closed to further replies.