October 29, 20223 yr I just installed the TCA quadrant. The sim recognizes the throttle and sees the movements when in the controls page, but not when I am in the Fenix. Is there a step I missed. I know i need to go into the MCDU to calibrate, but the lever isn't moving in the sim. Any thoughts? The spoiler axis works, engine start, parking brake and gear works but not the flaps . Any help would be apprecitated Edited October 29, 20223 yr by Zimmerbz Intel Core i7 12700K (5.0GHz Max Boost Clock) 12-Core CPU 32GB G.Skill Performance DDR4 SDRAM 3600MHz Graphics Processor:12GB Nvidia GeForce RTX 3080 Ti, GDDR6x System 2TB Western Digital, NVMe M.2 Solid State Drive
October 29, 20223 yr 12 minutes ago, Zimmerbz said: Any thoughts? Read this - all of it, and watch the video: https://kb.fenixsim.com/setup-tca-throttle Cheers, Søren DissingIntel i9-13900K @5.6-5.8 Ghz | ASUS ROG RYUJIN III | ASUS ROG Astral RTX 5090 OC | ASUS ROG Maximus Z790 Hero | 64Gb DDR5 @5600 | 1Tb Samsung M.2 980 PRO (Win11), 1Tb Samsung M.2 980 PRO, | ASUS ROG Helios 601 | 32” ASUS PG32UCDM 240hz 4K | Chaseplane | TM TCA Captain's Edition, Winwing FCU + EFIS L/R, Tobii 5 | Win 11 Pro 64 | MSFS 2024 | BA Virtual | PSXT, RealTraffic w/ AIG models
October 29, 20223 yr Author 16 minutes ago, SierraDelta said: Read this - all of it, and watch the video: https://kb.fenixsim.com/setup-tca-throttle THanks. I got it working now. I appreciate it Intel Core i7 12700K (5.0GHz Max Boost Clock) 12-Core CPU 32GB G.Skill Performance DDR4 SDRAM 3600MHz Graphics Processor:12GB Nvidia GeForce RTX 3080 Ti, GDDR6x System 2TB Western Digital, NVMe M.2 Solid State Drive
October 30, 20223 yr Author The only thing I couldn’t get working were the engine switches. They kept flickering on and off. Any cause for that? The ignition switch to be more specific. In the VC it always goes back from start Edited October 30, 20223 yr by Zimmerbz Intel Core i7 12700K (5.0GHz Max Boost Clock) 12-Core CPU 32GB G.Skill Performance DDR4 SDRAM 3600MHz Graphics Processor:12GB Nvidia GeForce RTX 3080 Ti, GDDR6x System 2TB Western Digital, NVMe M.2 Solid State Drive
October 30, 20223 yr 1 hour ago, Zimmerbz said: The only thing I couldn’t get working were the engine switches. They kept flickering on and off. Any cause for that? The ignition switch to be more specific. In the VC it always goes back from start I have that behaviour too. Checked for dual assignment but had none so I am stumped. Edited October 30, 20223 yr by Swe_Richard Spelling Richard 7950x3d | 32Gb 6000mHz RAM | 8Tb NVme | RTX 4090 | MSFS | P3D | XP12
October 30, 20223 yr I found that my TCA TQ no longer worked the way I expected after cleaning out some residual USB device files from my PC. Going through the whole firmware update install made everything work as it should. AMD Ryzen 5800X3D; MSI RTX 3080 Ti ; 32GB Corsair 3200 MHz; ASUS VG35VQ 35" (3440 x 1440) Fulcrum One yoke; Thrustmaster TCA Captain Pack Airbus edition; MFG Crosswind rudder pedals; miniCockpit FCU; CPFlight MCP 737; Logitech FIP x3; TrackIR MSFS; Fenix A320; A2A PA-24; HPG H145; PMDG 737-600; AIG; RealTraffic; PSXTraffic; FSiPanel; REX AccuSeason Adv; FSDT GSX Pro; FS2Crew RAAS Pro; FS-ATC Chatter
October 30, 20223 yr 7 hours ago, Swe_Richard said: I have that behaviour too. Checked for dual assignment but had none so I am stumped. Me to. It seems too only happen when to move the switch to IGN and then look around using the right mouse button. (i.e It flicks back to NORM whenever I press the right mouse button). Clearing the right button mouse assignment "Toggle External View Freelook (Hold)" stops this behavior, but that's of course not a viable solution Edited October 30, 20223 yr by Matt Webb Matt Webb
October 31, 20223 yr 13 hours ago, Matt Webb said: It seems too only happen when to move the switch to IGN and then look around using the right mouse button. It's been reported that you can use the middle mouse button without causing this problem, but I've never tried it and don't know what the assignment is, as I'm not near my FS PC at the moment. Ian Box
October 31, 20223 yr 1 hour ago, ConstVoid said: It's been reported that you can use the middle mouse button without causing this problem, but I've never tried it and don't know what the assignment is, as I'm not near my FS PC at the moment. Thanks! Might give this a go! Matt Webb
Archived
This topic is now archived and is closed to further replies.