December 7, 20241 yr 31 minutes ago, kayjay1c6b said: Quick question: As we with Reset XPDR are trying to think of solution that will make his and mine apps work consistently on different platforms do you guys have steam or Ms store version of the sim? Please write store and if it works. This will help us greatly. Literally just installed and used your latest update with MS Store version, had to wait a minute or two for the TLOD/OLOD values to be read but once they were there the app worked just fine with no apparent issues that I could see. Only that of low res textures on the land even with target FPS reached, there's definitely something different from the way MSFS2020 read LODs as I believe someone mentioned earlier in this thread, that and/or the servers just being a PITA. Weird because I did back to back flights and one of those the ground textures were just fine, anyway maybe there;'s more too it but for now yeah your/Resets app works fine with MS Store. Pico Neo3 Link VR - Windows 11 64bit, Gigabyte Z590 Aorus Elite Mobo, i7-10700KF CPU, Gigabyte RX 9070 XT OC 16gb (AMD GPU), 32gig Corsair 3600mhz RAM, SSD x2 + M.2 SSD 1tb x1 Saitek X45 HOTAS - Saitek Pro Rudder Pedals - Logitech Flight Yoke - Homemade 3 Button & 8-directional Joystick Box, SNES Controller (used as a Button Box - Additional USB Numpad (used as a Button Box)
December 7, 20241 yr It would also be helpful to @kayjay1c6band I if users that have finally got it to work could, in addition to identifying store vs steam version, tell us if the offset it has found is any different to the following. It's located in %appdata%\MSFS2024_AutoFPS\MSFS2024_AutoFPS.config and the line we are looking for relating to offsetModuleBase is: <add key="offsetModuleBase" value="0x0A14F010" /> or <add key="offsetModuleBase" value="0x09E18000" /> The former seems to be what Steam users are getting and the latter MS Store. If your experience is any different please advise. Thanks. Edited December 7, 20241 yr by Reset XPDR 9800X3D | 4090 | 64GB | 2+1TB NVME | 2TB SSD | 2TB HDD | 85/50/43” TVs | Quest 3 | DOF H3 Motion Rig | Buttkicker | T.16000M Flight Kit MSFS @ 4K Ultra DLSS Performance FG 80 FPS | VR VDXR Godlike 80Hz SSW | MSFS VR DLSS Quality, Ultra Preset - Windows 11 Acer Nitro 5 | i5-11400H | RTX 3060 6 GB | 32GB DDR4 | 15.6" FHD IPS 144Hz | 2 x 512 GB SSD | Windows 11
December 7, 20241 yr 2 hours ago, kayjay1c6b said: Quick question: As we with Reset XPDR are trying to think of solution that will make his and mine apps work consistently on different platforms do you guys have steam or Ms store version of the sim? Please write store and if it works. This will help us greatly. I have the Steam version, working for me 👍 10900KF @ 5.2Ghz, 2070 Super, 32GB 3200Mhz, Gigabyte M28U 4K Monitor - MSFS: Terrain LOD: 200, Object LOD: 100
December 7, 20241 yr 6 minutes ago, AppleUK said: I have the Steam version, working for me 👍 Could you check your offset value too, as requested here Thanks 9800X3D | 4090 | 64GB | 2+1TB NVME | 2TB SSD | 2TB HDD | 85/50/43” TVs | Quest 3 | DOF H3 Motion Rig | Buttkicker | T.16000M Flight Kit MSFS @ 4K Ultra DLSS Performance FG 80 FPS | VR VDXR Godlike 80Hz SSW | MSFS VR DLSS Quality, Ultra Preset - Windows 11 Acer Nitro 5 | i5-11400H | RTX 3060 6 GB | 32GB DDR4 | 15.6" FHD IPS 144Hz | 2 x 512 GB SSD | Windows 11
December 7, 20241 yr 1 minute ago, Reset XPDR said: Could you check your offset value too, as requested here Thanks Sure, it's the same value "offsetModuleBase" value="0x0A14F010" 10900KF @ 5.2Ghz, 2070 Super, 32GB 3200Mhz, Gigabyte M28U 4K Monitor - MSFS: Terrain LOD: 200, Object LOD: 100
December 7, 20241 yr 8 minutes ago, AppleUK said: Sure, it's the same value "offsetModuleBase" value="0x0A14F010" Thanks. That's what I was expecting 👍 9800X3D | 4090 | 64GB | 2+1TB NVME | 2TB SSD | 2TB HDD | 85/50/43” TVs | Quest 3 | DOF H3 Motion Rig | Buttkicker | T.16000M Flight Kit MSFS @ 4K Ultra DLSS Performance FG 80 FPS | VR VDXR Godlike 80Hz SSW | MSFS VR DLSS Quality, Ultra Preset - Windows 11 Acer Nitro 5 | i5-11400H | RTX 3060 6 GB | 32GB DDR4 | 15.6" FHD IPS 144Hz | 2 x 512 GB SSD | Windows 11
December 8, 20241 yr Wait, so this is working ok decently ish in 2024 Store version? 7800+4090+64ram Just Flight RJ, 146 and F28, Piper Arrows ---A2A Aerostar and Comanche---Black Square Starship, Duke(s), TBM, Bonanza/BaronV2, KingAir---FSReborn FSR500---COWS Da42---FX P180, HJet & VJet---FlySimWare Chancellor and LearJet---FlightSimStudio EMB175 &P2006T---Fenix 320---PMDG DC6, 737(700+900), 777---C22J---Milviz Cessna 310 & Porter---SimWorksStudios Kodiak, PC12, Zenith & RV14---BigRadials Goose---IndiaFoxEcho MB3339+F35.
December 8, 20241 yr Don't know if you still need the input. It's working only with "VR Optimized" auto Method MSFS2024 Microsoft Store. <add key="offsetModuleBase" value="0x09E18000" /> Vincent B. Check my free MSFS sceneries : https://flightsim.to/profile/vbazillio/trending and my hardware configuration.
December 8, 20241 yr 3 hours ago, Sonosusto said: Wait, so this is working ok decently ish in 2024 Store version? Seems like for most users yes
December 8, 20241 yr hello again I still have the same problem window app not showing up... I did everything by the book (your book ) run in adm mode and nothing . its on i can see on the task manager and i dont know what to do now. sorry for the complain end enjoy your weekend
December 8, 20241 yr 11 hours ago, Reset XPDR said: It would also be helpful to @kayjay1c6band I if users that have finally got it to work could, in addition to identifying store vs steam version, tell us if the offset it has found is any different to the following. It's located in %appdata%\MSFS2024_AutoFPS\MSFS2024_AutoFPS.config and the line we are looking for relating to offsetModuleBase is: <add key="offsetModuleBase" value="0x0A14F010" /> or <add key="offsetModuleBase" value="0x09E18000" /> The former seems to be what Steam users are getting and the latter MS Store. If your experience is any different please advise. Thanks. <add key="offsetModuleBase" value="0x09E18000" /> MS Store so the same Pico Neo3 Link VR - Windows 11 64bit, Gigabyte Z590 Aorus Elite Mobo, i7-10700KF CPU, Gigabyte RX 9070 XT OC 16gb (AMD GPU), 32gig Corsair 3600mhz RAM, SSD x2 + M.2 SSD 1tb x1 Saitek X45 HOTAS - Saitek Pro Rudder Pedals - Logitech Flight Yoke - Homemade 3 Button & 8-directional Joystick Box, SNES Controller (used as a Button Box - Additional USB Numpad (used as a Button Box)
December 8, 20241 yr 27 minutes ago, chris74370 said: hello again I still have the same problem window app not showing up... I did everything by the book (your book ) run in adm mode and nothing . its on i can see on the task manager and i dont know what to do now. sorry for the complain end enjoy your weekend I had this issue initially too, but have been able to fix it. Make sure the app is closed. Go in to your config file and change the values for the two window coordinates lines to be the following: <add key="windowTop" value="50" /> <add key="windowLeft" value="50" /> Rerun the app and your window should be top left on your main monitor/ 9800X3D | 4090 | 64GB | 2+1TB NVME | 2TB SSD | 2TB HDD | 85/50/43” TVs | Quest 3 | DOF H3 Motion Rig | Buttkicker | T.16000M Flight Kit MSFS @ 4K Ultra DLSS Performance FG 80 FPS | VR VDXR Godlike 80Hz SSW | MSFS VR DLSS Quality, Ultra Preset - Windows 11 Acer Nitro 5 | i5-11400H | RTX 3060 6 GB | 32GB DDR4 | 15.6" FHD IPS 144Hz | 2 x 512 GB SSD | Windows 11
December 8, 20241 yr 1 hour ago, chris74370 said: hello again I still have the same problem window app not showing up... I did everything by the book (your book ) run in adm mode and nothing . its on i can see on the task manager and i dont know what to do now. sorry for the complain end enjoy your weekend Sounds like exactly what I got. What I'd missed and eventually read in the developer notes>known issues on the GitHub was that when installing the application don't select any of the Autostart options as they aren't working. Reinstalled and the application window now shows properly.
Create an account or sign in to comment