mundie

one last one the recently updated X-Aviation MU2 XP11

Dual 530's in the fantastic VSkylabs DC3 XP11

Carenado B1900 XP11

530 in the bell 412 by x trident

put the 430 in the excellent let 410 and its displaying fine, but the knobs and buttons dont seem to be working. have use sim commands on. config file [GNS] ; comma separated list of gauges gauges = GNS_430_1 [GNS_430_1] ; comma separated list of render targets. drawto = WINDOW, PANELS, Garmin_430_screen ; is the master device if true. MasterDevice = true ; connects GPS to copilot side if true. CopilotSide = false ; selects COM/NAV Radios '1' or '2'. RadiosPair = 1 ; uses computer time if true, simulator time otherwise. ComputerTime = false ; integral lighting rheostat index (0 to 3) or percent (-100 to 0) Rheostat.Display = -100 ; integral lighting rheostat index (0 to 3) or percent (-100 to 0) Rheostat.Buttons = -75 ; connects GPS to HSI if true. LinkHsi = true ; connects GPS to HSI course motor if true. LinkCrs = true ; connects GPS to OBS input if true (LinkHsi/OBS or AutoNavSource/OBS). LinkObs = true ; connects GPS to VOR if true. LinkVor = true ; connects GPS to Autopilot if true. LinkOto = true ; connects CDI key to NAV/GPS switch if true. AutoNavGps = true ; selects VLOC NAV '1' or '2'. '0' selects same source as 'RadiosPair'. AutoNavSource = 0 ; sets device power source: ALWAYS_ON,AVIONICS_BUS,MAIN_BATTERY PowerSource = AVIONICS_BUS ; connects GPS to Shadin Air Data computer if true. UseAirData = true ; connects GPS to Shadin Fuel Data computer if true. UseFuelData = true ; connects GPS to RYAN 9900BX if true. UseRyanTcad = true ; sets TCAD sound alerts volume in percent: 0 to 100. RyanTcadVolume = 50 ; connects GPS #1 to GPS #2 if true (both required). UseCrossFill = false ; enable device failures if true. UseFailures = false ; uses Simulator GPS commands if true. UseSimGpsCmds = true ; sets fuel type: AVGAS,JETA,JETB FuelType = AVGAS ; sets TAWS type: TERR,TAWS TawsMode = TERR ; sets TAWS surface: HARD,HARD_SOFT,WATER,ANY TawsSurface = HARD_SOFT ; TAWS minimum runway length (feet) TawsMinLength = 40 ; sets master sound volume in percent: 0 to 100. MasterVolume = 100 ; selects the CPU running the trainer process: 1 to 32 ; 0: last core, -1: automatic. CpuAffinity = -1 ; connects to: 'PFC_STACK','PFC_430','PFC_530' or any '#PID' (#D002 for PFC_430) ; no value connects to first found, 'OFF' disables connection. HardwareDevice = ; hardware selector number or -1 to disable. HardwareIdx = -1 ; sets device power knob switch mode: NONE,DEFAULT_ON,DEFAULT_OFF PowerKnob = NONE ; sets TCAD maximum number of targets to X-Plane AI Traffic Count. UseTcadAiCount = false ; updates Simulator GPS flight plan if true. LinkSimGps = false ; saves the active route as a Simulator flight plan if true. AutoSavePln = false ; mute sound when simulator window looses focus if false. NoAudioFocus = false [GNS_430_1.WINDOW] ; display window if true. visible = false ; show screen only gauge if true. nobezel = false ; display type: WINDOW,PANEL2D,PANEL3D,PANELS frame.type = WINDOW ; display position and dimension (left,top,width,height) frame.rect = 758,608,490,206 ; screen only border size (pixels). border.size = 0 ; screen only border color (#RGB or #RGBA). border.rgba = #000000 ; enable mouse clickspots if true, disable if false (use SHIFT to override) usemouse = true ; display mouse tooltips if true. tooltips = false ; freeze display position if true. locked = false ; enable popup window if true (screen clickspot) usepopup = true ; left mouse button on the screen toggles popup window if true. popleft = false ; right mouse button on the screen toggles popup window if true (requires XP11.1). popright = false ; display as popout window if true (requires XP11.1). undocked = false ; VR mode position and dimension (left,top,width,height) (requires XP11.20) vrmode.rect = 0,206,490,206 [GNS_430_1.PANELS] ; display window if true. visible = false ; show screen only gauge if true. nobezel = true ; display type: WINDOW,PANEL2D,PANEL3D,PANELS frame.type = PANELS ; display position and dimension (left,top,width,height) frame.rect = 0,0,0,0 ; screen only border size (pixels). border.size = 0 ; screen only border color (#RGB or #RGBA). border.rgba = #000000 ; enable mouse clickspots if true, disable if false (use SHIFT to override) usemouse = true ; left mouse button on the screen toggles popup window if true. popleft = true ; right mouse button on the screen toggles popup window if true (requires XP11.1). popright = true [GNS_430_1.Garmin_430_screen] ; display window if true. visible = true ; show screen only gauge if true. nobezel = true ; display type: WINDOW,PANEL2D,PANEL3D,PANELS frame.type = PANEL3D ; display position and dimension (left,top,width,height) frame.rect = 0,1024,431,241 ; screen only border size (pixels). border.size = 0 ; screen only border color (#RGB or #RGBA). border.rgba = #000000 ; enable mouse clickspots if true, disable if false (use SHIFT to override) usemouse = true ; left mouse button on the screen toggles popup window if true. popleft = true ; right mouse button on the screen toggles popup window if true (requires XP11.1). popright = true

“Checklists have big buttons, for ease of use” lol

what does pilot2atc use for airport database? i had the trial a while back, but stopped using it as i found a few smaller airports that i use missing in p2atc. cheers

yes it interferes with sasl and stops all switches operating as per the post previously linked

none of the rxp stuff works with the b200

the only two aircraft that dont play nice with rxp are the carenado b200 completely unusable and the stma pc12 does work sort of but doesnt integrate with the hsi.

any update from either carenado or rxp on this yet? most of the carenado aircraft i own have this problem. cheers

cheers pivot, that worked a treat. couple of questions if i may have you tried it with the gtn? just tried it myself and the height seemed to be out - i just manually edited the height and it worked fine. whats the best \ easiest way to use excel if you dont have it installed? i used this https://sheet.zoho.com/sheet/excelviewer anyone know of a better one?

https://postimg.org/image/9mvsygipx/ hooray got it working the excel helper thing form above worked. the manual instructions are a bit... cryptic rxp on top laminar underneath

so i had a play with drawing the rxp 530 screen on top of the laminar 530 in the STMA PC12. it displays, but i must have the numbers wrong, because its way out from where it shold be. the two numbers worked out from the panel preview give an xand y co-ords of where to graw the screen? maybe i got them wrong, but what do the other two numbers mean? will have another fiddle around tomorrow. cheers ximm

is it on by default? never noticed it before. just got xp11 installed on my new pc and still need to re install the gtn