waly87

Thank you, certainly hadn't seen that before. Will look out for other pausible flightplans as well.

Hello ladies and gentlemen, I was wondering if anyone is aware of an ai package (or even just flightplans and accompanying models/repaints for the dassault falcon jets. The bbj's, gulfstreams, bombardiers, cessnas etc are all covered but I can't seem to find anything similar for the falcons. Regards

It would be nice if the Thread starter's post was read carefully before posting, he is talking about AI not himself flying there. Also, a319/a320, 737-700/800 for Avianca, Gol, Tam etc operate regular commercial service into that airport. Also to the OP, it is something you may have to ignore if you don't want to make all your AI 737/A320 aircraft STOL aircraft. Although there is always the option of making separate individual aircraft folders for aircraft STOL version of your AI aircraft. E.g. I have a regular folder for my all my AI Q400 aircraft and I have a separate folder for an STOL version of Porter's Q400 that fly into CYTZ which has a very short runway and steep ILS approach.

Hello Jive1, What you want to modify is in the aircraft cfg. [TurbineEngineData] static_thrust= You'll want to increase static thrust by about 1000-2000 for twin engine 737, a320 family aircraft.

Couldn't have said it any better. I remember he was the first person to respond to my first ever question about fs. This is so sad, RIP David, I will miss seeing your friendly face and posts in the forums.

Hi, so after quite a while of using the cyyz scenery by Dennis Di Franco, i finally decided to add crossing runways, so all 5 runways can be used @ once. I've done this a lot however for once ADE has me stumped. I've checked to see no errors have occurred but when i try to compile the airport through ADE, the bgl compiler crashes but it says airport compiled when in reality it did not compile the airport. If anyone would please like to look at the file for me ( i can upload it here) and see if they can manage to compile it for me?Thank youWalter O

Hi, I know you specified freeware but if by any chance you have the cls a340-500/600 installed, i have modified the panel to work with the vasfmc a380. If you would like this panel, feel free to pm me.CheersWalter O

Hmm, the pitch trim values the FMC suggests are a bit inadequate for the merge. I tend to add 2.0 to 2.5 to the suggested pitch trim values. E.g. FMC pitch trim = 7.00, set pitch trim = 9.00.I haven't had a tail strike with the 300er or 200lr and always lift up at or about the calculated v2 speed.Try it out and tell me if works for you.CheersMr W.

Hmm, this might seem like a silly question but is your pitot heat on?

Hello,This thread on page 6 will be of help to you.http://forum.avsim.net/topic/291762-the-ultimate-pss-777-fde-tweak/CheersWalter

Morning fellow virtual aviators,To those who have the wilco or wilco/cls a340-600, what would be the ideal fuel flow scalar?I have the latest wilco service pack and the fuel flow scalar on that is 0.73?I'm asking this because the fuel burn values seems really low for an a340-600. E.g I did a 2800nm flight, roughly 6hrs (average winds= -16kts) @ mach 0.84 with 386 pax & 80,000lbs cargo. Total flight fuel was 105,000lbs. This is about the same i've seen on a 777-200er rw flight report doing the exact same journey.So i was wondering if it was just me or the fuel scalar (or whatever it is in the .air file that control fuel burn) is a little inaccurate?CheersWalter

The 1.15 fuel flow scalar seems to work just fine on the B77L.Tested this on a flight from EGLL-YSSY about 9190nm (+ head wind and tail wind components).Total fuel consumption was 329,441lbs with a ZFW = 420,000lbs (317 pax and 37000lbs cargo).I'll try the B77W on a 7500nm route later on in the week and see what figure works best though 1.15 seems fine so far.:)

Hello,First of all thank you to twasono for the files, flown them and they are awesome.Though i did also notice the fuel consumption of the 77L and 77W were on the low side and i was wondering what values you tweaked yours to, to get much closer to the accurate value?Cheers.

Thank you guys for the responses. Very true most aircraft pitch down when flaps are extended but when a 620,000lbs B744 @ 200KIAS is pitching down 3-5 degrees below zero with only flap 5 extended...kinda weird. I wish i had a reference to tweak the lift scalar to. If anyone does have flap settings that work well, please let me know if you can help. I will go look on the pmdg & posky forums again, though i doubt i'll find much as neither of them support the merge.ThanksMr W

Hello ladies and gentlemen, hope yall are having a great day.I have a little problem and i was wondering if anyone could help.I have a pmdg-posky 747 merge and i noticed when on approach and i set my flaps to 5, the nose pitches down excessively, sometimes down to 3-5 degrees, i know i'm at the right speed as i'm following the flap indicator settings on the pfd. Also when i look at the flaps from an exterior view, they seem to be at least on the 20 degree setting, even though the display shows it's at 5 degrees. This is what the flaps section of the merge looks like...does anyone have an alternate setting?[flaps.0]type = 1 // Trailing edgespan-outboard = 0.8 // 0.0 .. 1.0extending-time = 25 // secondsflaps-position.0 = 0 // pseudo-degreesflaps-position.1 = 0.00,280 // 1 - no TEflaps-position.2 = 25.0,260 // 5flaps-position.3 = 27.5,240 // 10flaps-position.4 = 30.0,230 // 20flaps-position.5 = 31.5,205 // 25flaps-position.6 = 33.0,180 // 30lift_scalar = 1.0drag_scalar = 0.1pitch_scalar= 1.0system_type = 1 //Hydraulic[flaps.1]type = 2 // Inboard/midboard leading edgespan-outboard = 0.53333 // 0.0 .. 1.0extending-time = 12 // secondsflaps-position.0 = 0 // pseudo-degreesflaps-position.1 = 1.0 // 1damaging-speed = 275 // KIASblowout-speed = 280 // KIASlift_scalar = 0.88drag_scalar = 1.54pitch_scalar= 1.0system_type = 1 //Hydraulic[flaps.2]type = 2 // Outboard leading edgespan-outboard = 0.2666 // 0.0 .. 1.0extending-time = 10 // secondsflaps-position.0 = 0 // pseudo-degreesflaps-position.1 = 0.0 // 1 - no effectflaps-position.2 = 5.0 // 5damaging-speed = 255 // KIASblowout-speed = 260 // KIASlift_scalar = 1.0drag_scalar = 1.0pitch_scalar= 1.0system_type = 1 //Hydraulic[flaps.3]type = 1 // Modelspan-outboard = 0.7extending-time = 60flaps-position.0 = 0.0flaps-position.1 = 1.0flaps-position.2 = 5.0flaps-position.3 = 10.0flaps-position.4 = 20.0flaps-position.5 = 25.0flaps-position.6 = 30.0lift_scalar = 0.0drag_scalar = 0.0pitch_scalar= 0.0system_type = 1 Thanks in advance

Thank you very much kind sir.

Hello,Sorry to bring this up again but does anyone still have JV's afcad file for the imaginesim katl?Thank you in advanceWalter

Why the unnecessary (and generally unfriendly) responses to those asking for missing WOAI packages? Some people are still very new to this and probably don't know how to find out information on the forums just yet, offer them some kind of help or advice instead of a rather unfriendly welcome.A lot of people are referred to the avsim forum when they have fs problems because they'll most prob receive help in a nice and polite manner. It'll be great if that could continue as it's what i've always known this place to be.To your request RampRatBill, as it's been stated earlier, some WOAI packages have been taken off for the reasons in the post above. Your best bet would be to go to alpha india group website and download a flightplan for the above airline and manually fill it in with repaints from avsim.Hope that helps somehow.

Yea, i also did look at Fs Genesis, it only has a land class file for parts of the USA, the rest are terrain mesh files for the rest of the world too.

Thank you for the response fs2004, i do have fs global 2010....but it only contains terrain mesh files, not landclass. I'm looking for something similar to the products created by scenerytech for fsx but for fs9.....

Hello fellow simmers.I've spent some time looking around for landclass products for Africa in fs9 and so far i have not been successful. I do know of the free one on avsim and i think it's lovely but it doesn't quite cover a lot of cities. I was wondering if anyone knew where i could get a proper landclass product for Africa as a whole, or to be even more specific, West Africa? It could be payware and/or freeware? :( Thank youWalter

100% agrees with Mike's opinion, you hit the nail right on the head. Give us what we want, not what you think we'd like. Congratulations once again to the REX team. :( :(

Ahh yes, finally what i've been saving for. Haven't purchased any addons in a long while but this is unarguably an exception to be bought once the servers are back on. Congratulations for a product well done and thank you for an early christmas present. :( :( One question though, can all functions on this (including weather) run whilst active sky is on as well? :(

Hello everyone,I finally got to buying the fsdreamteam KORD and KJFK(simply amazing, yea pretty late i know lol). I was wondering if anyone had the afcad to the KJFK that enabled the use of all 4 runways? I've really searched everywhere and only managed to obtain the afcad to KORD from the fsdreamteam forums today.Any help would be massively appreciated.Thank you in advanceWaly