Gabster

Is there any way to disable hat switch for ezdok? I can only pan left/right and i gives me some strange blurr. Assigning hat switch to view(pan) in P3d gives me smooth pan up/down but still left/right is corrupted by ezdok. I dont want ezdok to use hat switch at all, as it seems not to work proper.

Can someone tell me how to get my Austria Pro X from FSX into P3D V3.1?

Hey Guys, Im happy I got ezdok running in P3D. Thanks to Poppets advise! One thing doesnt work for me, thats the HAT SWITCH. I double checked and it is not assigned in P3D. In ezdok I set options/config joystick->Hatswitch as button. This setting doesnt change anything and it removes itsself after some time. For me the HAT SWITCH is not doing anything but a little shaking of the ezdok views and in outside view (f11) it also doesnt work. Any Idea? Another thing is, that in outside view (f11) my mouse is only rotating left/right but not up/down. Hope someone can help =) Gabriel PS: I get this error on start up telling me something with "floating" & "zero". Ideas? :-)

Hey Guys, this post is already some months old but I hope you dont mind me adding another question. Was this Problem ever solved? I have installed P3d 3.1 and AS SP4.1 and I get the same strange behavior. Now it is not the best way to compare real time weather with any P3D weather theme but I dont have any other weather engine to compare with. This is what I get: Many small clouds repeating at same height. Second screen is with ASN off. 1 2

Hey there, First I have to appologize for posting this question. It must have been discussed a thousand times already but I was not able to find it. I am looking for a way to assign keys to set, in- or decrease the speed, altitude and heading in the mcp of my PMDG777. Is there a chance to have for example something like shift+a+scroll for in- and decreasing the altitude and shift+s+scroll for in- and decreasing the speed? What I have tried earlier was to set the mcp on my second lower screen so I could set it without switching views. But that would not work in full screen mode :-( I am also open to buy a cheap panel that does the job but i think I would have to deal with fsuipc then, what I am afraid of. Thanks for any hint Gabriel

yap tried it and it works in windowed mode. Not sure if I can get used to it. Vsync is missing and I dont see a way to get rid of the window frames...

I am using full screen, best performance for me. I have -10fps in windowed mode :-/

I was very suprised that I couldnt find any related posts to that Problem as it seems to be a major fsx problem. I have tried in PMDG NGX and 777. I have moved the MCP panel to my second screen but I am not able to use the mouse wheel to scroll the speed and altitude. It only works when the mouse focus is on the first screen but this gets losts as soon as I click on any button in the second screen like AP on/off. Is there any way to fix that? I would like to be able to use the scoll on the second screen to set heading, altitude and speed :-/ Thanks Gabriel

Hey Guys, is there other checklists available also? I have tried those on my pmdg777 when all switches and selectors where off and I didnt get the APU running :-/ Also I am looking for a checklist without APU but ground connection start up...any ideas? THX Gabriel

Hey Guys, has anyone ever seen something like that? My FSX is gone crazy... Any Ideas whats wrong?

Hey there, just look at the screenshot. This is my FSX and I wonder why it has such a bad resolution on the textures at night? Any idea why this is happening? All Airports... Thanks for any help! GAbriel

Today I got the same problem and I cannot remember I changed anything. I set every thing up the right way I think. It says single FMC Operation and the left IRS stays at DC and doesnt go to align. Thats followed by an alert: peep peep peep...No clue how to fix that:-/

hmhm I have the same Problems with the standart NGX - it is jumping on the runway - like resetting its position all the time. Same with the Hotfix- and after the Hotfix my engines look like they are off all the time, no movement in flight. All Button Lights in VC are off all the time.And about the Trim - I have this little Tooltip but isnt there another way to see the value? How do the pilots see the exact value in real flight?Gabriel

Same Problem here! Isnt there a way to set the ENB Series to the first Screen in the ini file?Any help is welcome=)

Using any other aircraft - resizing panels on a second screen and then saving the flight brings the panels back on a reload of the flight. Not in the right position but poped up on 1st screen and in the set size. Isnt it? In The PMDG NGX they fall back to default.

Did you solve your shimmering? What kind fo video card are you using? I had shimmering on taxi lines and many edges and object with nvidia and HD6950. What solved it for me on the HD 6950 was to select "Super Sampling AA" in ATI Tray tools.

I have the same problem with the saitek x52. It's always moving a little bit and that interrupts the TO/GA Mode. What helped for me was to leave the throttle at 0 and just push TO/GA. In 0 Position I have no unwanted Hardware movement on the throttle. But somehow some of my approaches end up with a go arround because of full thrust...Gabriel

yes it is 60. tried on my TFT again that only offers 60Hz.

Thanks PaoloA, I allready tried different Framerates and yes 60 frames works a little better but comes along with stuttering. I am pretty sure it is not my brain;-) I used 30 fps always in FSX with my old Hardware (dual core 3,2Ghz,, GTS 512MB, same screen) and it was no problem. I got me a new PC @ 4,4Ghz and HD 6970 2GB to have better experience with add ons and better graphics but not to lose performance compared to before.Again, the problem is not that it is unsharp or to slow. It loads very fast and its all sharp and somehow fluent but doubled image.Gabriel

Thanks pj, yes that is tearing as I had it before I switched vsync on. This one is gone but the crazy vibrating screen remains and becomes worse with lower framerates. Its like I am drunk ( I am not!:), its all double displayed the faster i fly a turn, like the frames jump -5px to the left and back, so fast that there is a double picture :-/ No tearing - no stuttering. I cannot make a screenshot of that - does that mean anything? A permanent double load of a frame or tearing could be captured.Gabriel

I switched VSync on and the result was that some sort of tearing disapeared. With Vsync off I had the effect, that every 200px from top to bottom of the screen the image was "shifted". I thought that was what people mean when they talk about tearing. I got my Screen on 85Herz now.I wonder why it works when I turn the camera arround the plane very fast in flight.

no Anti virus installed. All Auto updates off. Only AI Suite and TurboV is on what belongs to the mainboard. Turbo V is adjusting the CPU speed. Again I think it is more a misconfiguration or missing setting than an overload ;-/Switched off HyperTh. -> no change...

Update: I set my CPU to 4,4GHZ and startet with a blank cfg applying bojotes files and playing with bufferpools and fiber_frame_time_fraction. It is like FSX ignores what I set in the cfg. Even with the overclocked system it is the same! Stuttering @ unlimited frames and a strong vibration of texture with limited frames.There seems to be a bottleneck anywhere I cannot find.

No luck with the fiber_frame_time_fraction. What ever setting I apply - nothing changes the behavior I see. The whole screen is like displayed three times next to each other. Flying a turn over the runway I can see 3 runway lines. And everything vibrating. The lower I set the frame rate the worse this effect gets. Setting frames unlimitted eliminates this error but results in stuttering every 2 seconds.Gabriel

Thanks for your quick response. I'll try FIBER_FRAME_TIME_FRACTION. I already have professional Bios Profiles for the overclocking but thanks for the Link =)Isnt it wasting power overclocking just to get what I had before on a not overclocked system with even weaker Graphic Card and RAM? Even the lowest setting didnt solve my Texture-Problem so I came to the conclusion that it is not the CPU.Gabriel