mazelda

Not really sure exactly what happened but some of my assignments got messed up,after a fair bit of trial and error I got it working again

Hi, Just wondering if anyone can give me some ideas on getting gsx pro to get setup. Because i installed chaseplane first when i try to setup any gates within gsx nothing is controlable and is a nightmare trying to setup . Has anyone managed to get this to work after installing chaseplane first Thanks

Hi all , Bit of an issue with my throttle specifically the Laxis Z The very end lever on the right as you look at it. I've checked the bravo throttle quadrant properties in the windows game controller settings for the Z axis and all works fine and I get full movement showing on that. But when i try to use this axis for either a condition lever 2 or the flaps up and down it only works to 50%. I've looked at the sensitivity curves and it only goes 50%of the way and no matter what I've tried adjusting nothing seems to work Has anyone come across something like this or know what the issue might be?

Hi all, Just a query/question regarding this product, before I pull the trigger and buy. This is aimed more at the UK as this is where I live. I'm wondering if anyone that has bought this product from the Wingflex site, how much it cost extra for the import charges, and roughly how long it took to arrive? The current price is $199 which with the current rate of exchange is about £ 140. I've not seen any bad reviews so this seem a good deal but just wanted to check on here first. Thanks

many thanks guys that did the trick. The instructions on doing this are not that ideal from parallel 42 are not the best as i followed theirs which did not work but yours worked first rtime

Hi guys I've sent an email to parallel 42 regarding this but just wondering while i get a reply if anyone knows a fix for this. I'm trying to setup my cameras and buttons for my aircraft now i've setup one how i want it (the fenix a320 cfm with sharklets) all good, however I also want to use these same views and buttons for another fenix a320 with sharklets. I went through the process of exporting the first one and saving it on my hard drive. I then setup my next a320 and went to import the cameras and buttons to this aircraft but on completion none of the buttons or views are set. any idea? I really do not want to go through every aircraft and variation of that if i can help it Thanks

Hi hopefully i can explain what i'm trying to do I have way too many controller profiles for my honeycomb bravo and I want to delete some of them, but i'm not sure which ones I want to delete and without going into every single profile or writing them all down and seeing them all at once I do not want to delete the wrong ones. Is there a way to view all the profiles and then choosing which ones to remove. I'm sure you used to be able to bring up the list from within the sim but perhaps I'm thinking of msfs 2020 thanks

Hi guys Just wondering if anyone can help with this, I still have msfs 2020 and msfs 2024 on my drive and I think its now time to move to only 2024. However there are a couple of aircraft i'm still waiting on to be ported,but as the pmdg 737 is imminent I am only waiting on the tfdi md11. I have the horizonsim 787-9 installed and working in 2024 but i want to still use the 787-10 specifically the British Airways livery. I was hoping it might be as simple as cut and pasting the BA livery from msfs 2020 to 2024 as to get the horizonsim to work it requires the 787-10 from msfs 2020 to work. Sadly this does not work as i'm getting the pink squares or the just get the rotating circle. Does anyone know if its possible and if so how, I can get my 787-10 liveries to work in msfs 2024 Thanks

I'm sure this has been asked before but all i can find is related to msfs 2020 I have downloaded the updated honeycomb software for msfs 2024 and in general they all work my fenix a320 works fine plus a few other payware addons but I cannot get my pmdg 777 or the crj aircraft to get the lights on. does anyone know what the solution is Thanks

Thanks will give it a try

hi guys, well i think the latest beta has broken my fenix a320 as i can no longer get reverse thrust to work. it all worked fine a couple of weeks ago but now, even though they have changed "throttle cut to "previous detent" (i think its called that ) on my first application of reverse thrust with my honeycomb bravo throttles the engines go into reverse fine but on then selecting idle again, no 2 engine stubbornly stays in full reverse and the throttle becomes unusable. Has anyone else had anything similar? Its driving me nuts all was working well and then this

Hi guys, Does anyone know how to change the map direction of the nd display in the fenix a320 currently mines goes from top of screen to bottom and i would prefer it to go the other direction. thanks

Hi, Wonder if anyone can help. I'm running win 11 but my shortcut icons for starting both msfs 2020 and 2024 have changed to just white shortcuts. I can still start both sims but would like to get the proper icons back. I have the microsoft bought versions of both sims but I have no idea where the icons might be on my computer to replace the plain white ones. Can any one advise please. I don't like them along my taskbar Thanks

Hi Just wondered if this is a incompatability issue or something to do with the beta of 2024 I've noticed with the latest beta my sim crashes when using a combo of pyrogue's EGPH and the default diamond aircraft. The weird thing is when using payware aircraft at the same airport,it's all fine and when i use the diamond aircraft at non payware airports its fine . Has anyone come across this or similar issues

Hi, Really dumb question but on starting the a350 and being outside how on earth do i get into the flightdeck? I have been al round door 1l trying to find a hot spot but nothing I can open eng cowls and some panels but thats it I know its probably simple but so far its eluded me Thanks

Hi all, i'm a happy user of win10 pro with no real issues to date, however as my pc is now compatable with windows 11 now that i've turned tpm on in my bios I'm wondering if or when i should bite the bullet and upgrade. As i've had no issues with win 10 what if any are my advantages to running win 11? Is it quicker? does it run the sims msfs 20, and 24 any better? I have seen loads of complaints about win 11 causing crashes non booting etc and this is also putting me off updating. plus i do not want all the word not allowed that comes with windows 11 ie cortana and the other bloatware that it comes with but if i am going to see some value to upgrading I will thanks for any advice regds

Hi, I've submitted a ticket to fenix regarding this, but while i wait a reply i was wondering if anyone else has had this at the bottom of the mcdu and how tgey fixed it. I've checked i have no updates from msfs, my navigraph is up to date and the correct airac shows on the mcdu. I've tried doing a complete uninstall and reinstall but i still get the message

Just another excuse for pmdg to say its not our fault but we are going to have to charge for you to use the products you have probably paid for 5 or 6 times, if you had p3d as well. In msfs 2024 Funny how the dc6 was probably the least popular product from pmdg is the most compatable!! Nothing to do with the fact that they know they would get very little in the way of funds from people wanting to use it in 2024 to warant resources in making it fully usable, so they will tell you its currently their most compatable product. Would'nt really surprise me if they hope to sell a few copies in the process. They will only ever make 737,747,777 on a rinse and repeat cycle for each msfs version Certainly just as good or better companies out there now. Ifly, fenix to name but 2 If any of them can compete with the triple or 74 from pmdg then this company could well end up going the same way as boeing are heading if they are not careful.

ok thanks will give it a try

Hi all, Apologies if this is in the wrong section feel free to move if required. Hopefully someone on here might know a heck of a lot more than me on setting bindings with spad neXt I'm slowly trying to get my head round it before i decide buying it ,but its quite a steep learning curve with setting some of the button options, I'm trying to bind the cockpit camera reset view to a button on my joystick but just cannot seem to get it to work. I've tried adding the condition and the action that mentions camera reset but that didn't work does anyone know possible spad settings that are required to do this action Thanks

Hi just wondered if anyone else gets this problem. When i start any aircraft in this sim I always start as if i'm 1 feet tall and the top half shows me under the wing no matter the height of the wing from the ground. The bottom half of the screen sort of shows the character cutomisation screen and i have no way to raise my height or get rid of the bottom half of the screen.

Thanks skywolf and vortex Im in uk but am visiting US in November. Plan is to possibly buy one while there

Hi I'm considering taking the plunge into a vr headset ,not sure which make yet. I see plenty of post out there about screen res within the vr headsets not being great,my question is what is the res of these headsets? Due to an extreme lack of space I am currently running an old monitor that has a resolution of 1920x 1080,is this the same as these vr headsets? if it hopefully is, then as i've never experienced p3d at 4k res it would not be the downer that some are finding for me Graphic card wise its not an issue as I have a 980ti. Just looking for a bit of advice before potentially pulling the pin thanks

well it depends on on how many paints for that particular aircraft type you have.But you will have to go the section where the paints are listed and check that they match the EXACT texture name and the [flightsim.xx] order is consecutive, remember the first one starts with 0. if they all look ok check everything else in the section for the texture e.g sim= matches the sim of the aircraft and all the other lines make sense. Unfortunately I don't use woai stuff prefering to create mine using aifp but the general rule of thumb is,if you can see the paint in dxtbmp then the chances are high that the fault lies in the aircraft.cfg paints section for the ai aircraft . Something as small as a .will be enough to throw the whole thing out. hope that helps a bit.

Don't know if you've tried this but acouple of things to look at are the following 1. Use the dxtbmp program and see if the black paints show up ok in that If they do, then have a look at the aircraft.cfg file that is inside the woai folder of the aircraft concerened. If the paints show up black in the dxtbmp program then your problem is most likely a bad paint texture file