Djembe

Hello and wellcome. This happend after MCE load, or just after start MCE? Did you start the sim before or after MCE? Did you read the manual and follow all the instructions? Are you runing P3D in compatibility mode for xp or something like that? I am sure you will get answer from MCE support, just wait. Do to think that because they provide a demo is no support after buy the product. They still there.

I think in the AIRAC have no information that tell what STAR is for what runway (in case the airport have diferent STAR for diferent wunway). You get this information looking the charts and usiong the logic. The last waypoint of the STAR is the first poin of the arrival. But the arrival can have diferent transitions as well. All this "premisses" need to be programed in voxatc for the atc give you the correct STAR with the correct arrival (transition include). And because this is not programed, i recive crazy vectors from atc on the arrival also, until i decide to set "no vectors for approach" for every flight plan i fly. ¿Does the producer going to program this or give a solution for manualy set the STAR/approach?

I have the same problem with 6.52 voxatc can not manage the airport that have diferent STARs for diferent runways. If they provide us a tool for manualy set the STAR and runway before the flight, or better during the flight I conntact the support a weak ago, i never recive answer.

I have the same problem with last version of voxatc (6.52). The asigned STAR have nothing to do with the approach. This happend to me in many airports using voxatc. I use PFPX for make the flight plan, and ASN for the weather. I contact the developer but he do not answer me.

I have both. FS2Crew is useless for me with my chockpit settings. I bought FS2C arround one year ago, after one test it was uninstalled. MCE is usefull for me. With voxkey and voxscript you can do everything you need with the voice. They just finish to repair my problem with AES. They provide me a patch when locate the problem. Now everything run well. One of the best support i find in FS in my opinion, the second after Hi-Fi (ASN) , and pair with majestic software. I never try FS2C support. I select MCE, of course.

I find something. If i say "cockpit to ground" the ground coordinator give the wellcome messege, and after the mechanic. So i can activate all the ground service with the voice without go nout full screen mode or push any switch. This problem was solved. The GSX/AES.pdf that comes with MCE need more information. This document confuse me.

If i select "Use preferred audio device" it go to the speakers, becuse is the main device. I think i will just choose one voice that come with MCE, are nice too. I will download a few more from MCE web for try. The voices i try to use are fom Cepstral, and i use it for voxatc. I will have more variety. Do not worry. Thanks

Keep mech on push is off. I only have 3 options on in "advanced options" -Stay to tray -Numlock disables reco -Interface AES In normal options all is off Checklist is ON No item status check is ON

Yes! For exemple, all the options in "COMMAND" work for "CHECKLIST", because is there were you set the voice for the mechanic/copilot, and other important options. So what i do is set to ON "Real cockpit crew coordination", set the options like I want, then turn off. Nice that you found this problem!

I use the last AES version 2.38. As i told in #78, all my fsx software is updatet to the last version. Depend the gate AES give you the option to pushback (unly one exit direction) or pushback to the left or right (when you can choose depending in runway configuration/atc instructions), can be this tthe problem? I never try, but what will hapend if the ground service ask for deicing? Can MCE handle this? I do many test with MCE for make it run with AES, i tounch many options, and now i complete set up MCE like i would like it run, but maeby something get "crazy". I will restore to default settings and set up MCE again how i need it to be for my configuration.

I have problems with the push back with AES I call the mechanic and i ask for pushback to the left, he answer and AES start to prepare for pushback, but then the AES menu appear again asking for push to the left/right... even if i repeat the order nothing happend, but if i press F1 or F2 the pushback start. AES have a few steps for pushback: -Prepare the aircraft for pushback (F6) -Request pushback or only clearence (F1-F2) -Select pushback direction (F1-F2) For some reason MCE have problems with the last menu.

I have two sound cards, one for speakers, another for headphones. All the voices that come with MCE, sound in the headphones as i set up (via "Assign Sound Device" tool, and manual also). But when i assign a TTS voice that not comes with MCE is sound in the primary sound device, in this case the speakers. I can not set the headphones as primary device due a configuration problem. Why MCE do not reproduce all the voices in the headphones as i set up?

Is posible to set a diferent key for "mute mic" other than NUM LOCK?

I think is allready done, did you read the manual? Manual, "How to interact with virtual co-pilot": This is what are you talking?

No problem because i do not use the follow me car, but i need to contact ground coordinator for deboarding

Thanks for the information. About the AES problem. If you can not solve the problem and you set any shortcut for "force flight mode" i will asign it to the "gound call" button on the overhead panel of the pmdg737 (simpit via FSUIPC). So after press this "ground call" it will "activate" the ground coordinator... not bad at all. For exemple i set "service interphone" on the overhead panel for mute the microphone... Even you solve the problem (is what i wish) you can set a shotcut for activate the ground coordinator please. Soon i will try how MCE works with AES on the arrival airport. I have the feeling that i will need to press "force flight mode" again. In the manual i read about some limitations with AES on arrival airport, what can you tell me more abaut this limitations before i test and report?

Thanks for the info, but what i am really interested is in AES support. The checklist is just an extra, i do not care too much. I have a simpit as you told, and i do not want to push any button for control AES. If you can make it run with AES i will buy it.

I try "fsInsider.ini" to 1 & 2 and it do not work. I do not have any "MonitorVatsimPanels=1" in the file, i never install vatsim on my pc. But i do not have any problem with the checklist, i can call the FO for a checklist without "force to flight mode". The problem is only for recive the ground coordinator wellcome.

Thanks, i will try now. but i want to give you some information more: I just finish my demo time and i want to decide if i will spend 72€ in MCE I only use MCE for two things: -Perform Checklist -Use AES with voice All the other features from MCE are no interesting to me, and are disable. I use FSX with this programs (all update to last version): -IVAO -VoxATC -AES -PMDG 737NGX -RAAS -ASN (network) -XPAX (network) The problem is just with the AES ground manager wellcome messege, because i can call for checklist everytime without problems. If i touch "FsInsider.ini", can i broke any of my othe fsx aplications? Can you set any keyboard key/joystick button for "force to flight mode"? same you did for mute (bloq num), and radio com (DEL).

Hello I have problems with AES I do not recive any wellcome from the ground coordinator untill i press "force to flight mode". The problem is that i am in full screen and i have no acces. how can i solve the problem?

I think if you set a scenery on top of the "runway numbers" it will be not afectected, and the atc will call the runway like is in the fsx and not in the AIRAC. if the runway number in fsx is the same in the AIRAC, no problem.

You can not specify how many attempts in voxatc The key is the sound simulator. when you training voice recognition is not simulator sound present. do the training with backgound engine sound ore mute your sim when speak if you do not have a noise cancelation mic.

I've never been able to complete a flight with voxatc without problems. Allways something fail. And you?

It happend to me also. Sometimes i have the feeling that you can say anything the second time and will pick it up. Try.

voxatc simply use MT6 aircraft, nothing else.