AMSPilot06

EHAM! it is very dated and with the new 2024 SDK system it should be many times better than the FT version

I got a problem with look around with the mouse. I can not look around with my mouse when CP is installed. Does someone know why this is? Thanks

Driver 591.44 works great with MSFS 2024 + SU4!

That should work, I did it by myself as well

Yeah it is standard. If you go to your usercfg.opt file under localcache, and scroll all the way down, you will notice 2 lines like: InstalledPackagesPath "the directional of your old community folder" and InstalledPackagesPathnextbooth "the directional of your new destination drive community folder". If you delete the line: "nextbooth" and change the InstalledPackagesPath "the directional of your old community folder" into the right direction like I have it on my E drive ""E:\MSFS 2024 stuff" and then save, rebout again and everything is okay.

Does it work good? Do you have experience with this app?

Hi all, I am going from MSFS 2020 to 2024, I have a question about saving and resuming flights. I have FSUIPC autosave on and I fly long-haul. Somehow I can not resume flights that is autosaved by FSUIPC7. How does this works? Greetings

I have to investigate this further. I have now a flight from Nice to Toulouse in the Fenix A321 of Transavia, everything ultra with FSLTL traffic (BATC). Busy airspace. With or without AutoFPS it is now just between 45-50 fps. But with AutoFPS is the TLOD 75 in red. In MSFS 2020 I did not have this problem so I have to check further how it comes. But the app is great! I have still MSFS 2020 and still use it with the 2020 version. Thank you.

I will test again a new flight tommorow, because it is late now and have to work in the morning. I will get back to you with my test.

Hello Reset XPDR, Thank you for your great app. I have used it in MSFS 2020 very well. I have MSFS 2024 as well, but the performance is not as great as it is with MSFS 2020. I don't understand my autoFPS settings. I am on the latest stable version also on MSFS 2024 SU3. I play with a 1440p screen, 50hz, so I want a target native FPS of 50, but it seems during cruise that it does not go above 40 fps. During approach and landing it is even lower. I am on a 7950x3d and 4090, 64 gb ram 6000mhz. Almost everything on ultra and I tried to lower the TLOD, but the fps stays around 40 fps max. Do you know why that it is maxed at 40 fps? Thanks in advance! edit: i don't know how to post a screenshot here.

Thank you. I will try to make something out of it. Thanks.

I have tried this as well, it is still not working. When I place the Taxi_light_02 on the edge of the taxiway and make the time to night time, the lights of the object is still off. Where can I find the "delete command / deleteAllApronLights"? I tried to search but I did not find it so far.

Hello all, I have a question about MSFS SDK developer mode. I would like to change some airport taxi lights such as the green taxi light and the blue edge lights. If I manual put taxi_lights_02 from the object-scenery, I don't see the light. I even can not change, or delete the airport lights in the current airport. I do not know what I am doing wrong, so I am here to ask you guys for information. How do I change the green taxi light and the blue edge lights of the taxiway? Dear regards, AMSpilot06

Yes I know indeed what you are experience. What is your TLOD settings?

Thank you! Is there a change in options I can make in my Nvidia panel or MSFS options to make good use of DX12? I always use DX11 but now I will try to make use of a higher GPU ussage. With a 1440p it is like between 30-50 procent max. Never higher. But still sometimes I can see that the stable 50 fps, goes like to 49 and up to 50 and again to 49, so one the flight. Before SU16 I did not had this. I have a 50-75 hz screen and for MSFS I play like on a 50 hz screen so it is smooth. I have locked my FPS in Nvidia panel to 50fps.

Is it better to use DX12 instead of DX11? Performance and stability wise. I play at a 1440p screen, on TAA, with a 7950x3D and 4090 GPU, 64GB RAM with 6000mhz speed.

Update from my side: I havent get time to do a long flight, but I did a short night flight in a less dense area (GMAD-GMTT) and had no problems with FPS/Performance, flying the A320 BFU. I will do a longer flight and see how it performed, due to work/family/kids, it is something a little difficult to make spare time to make a longer flight just to test.

Thank you for the options to look at. I am at work at the moment, when I am home I will try the suggested solutions. The ground is since SU16 also very bad. Not nice at all.

U mean the Nvidia graphics card driver right?

Which update did you do? Maybe I can try this as well.

I will check this tommorow, thank you. I did not re-name my community folder, was this necessary to do? I did not know before. Where can I clear the shaders cache? The computer was restarted after the update (SU16) was done. No settings not reset. I will tommorow rename my community folder and then check the performance. Does it create an own new community folder?

Hi all flightsimmers, Since the SU16 update of MSFS 2020, I have noticed that the performance is very bad. There are a lot of laggs and stutters. Normally with AutoFPS I can maintain a solid FPS of 50, which is also my monitor refresh rate of 50 hz. So it was very fluent and no problems at all. Now I experience on the same flight I did before SU16, a very lot stutters. Were I had 50 fps solid, locked, I have now during cruise and landing it goes down to 30 fps and then to 35, to 40 and back to 30, which caused a lot of stutters. I don't understand that if something works great, why the devs of MSFS 2020, touch things and it becomes as bad as it is now. I really don't understand. The ground textures is bad as well, it is blurry as it seems like it is from MSFS 2024. My specs are: 7950x3D with RTX 4090 24GB, 64 GB RAM 6000mhz, Nvme 4 TB and Win11. I have tested many airports and airplanes. Like PMDG 737, 777 en the Fenix BFU variants. All have the same bad performance. Which I did not have before SU16 update. With SU15 I have almost everything on Ulta, play on 2K monitor, TAA settings, TLOD is normally 50 and above 10.000 ft it is 200, OLOD is 200 normally and above 5000 ft it is 10 (all with AutoFPS 0.4.5.3) I need help to sort this issue out. Can someone please help me with this issue? If you need any more questions, please ask me and I will provide all information. Dear regards AMSpilot06

Very nice AC, the only issue i got is when approaching the rwy, the aircraft is like floating, very hard to manouavre back to the centerline. Is this normal?

Keep up the hard work. Appreciate this tool.

Thank you. I will try again when I am at home and try to replicate the flight.