May 19, 201115 yr Commercial Member A real dandy! Adds more AA options using nVidia Inspector. Better IQ and perfprmance IMO.http://downloads.guru3d.com/download.php?det=2727Cheersjja Jim Allen[email protected]SkyPilot Software home of FSXAssist / P3DAssist
May 19, 201115 yr Thanks for the heads-up! Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
May 19, 201115 yr Not bad, again low end stutters better and smoother from the 270.xx, each driver seems better these days. The image quality looks different, but could be me! Simon
May 20, 201115 yr After two days of testing, I had to remove these drivers. They did yield slightly better fps, but the image quality was not as good as the previous set 270.61. I am happy with 270.61 as AA settings etc set-up as Tabs on pmdg suggested. The sim looked and worked great with those particular drivers under his suggested settings. Looks far better on the 270.xx vs 275.xx for me; mainly noticeable on the panel, but overall image quality is better on the previous set for me and my config. Weird! This was on a 580, so other cards may benefit more like the 560/550 as more tweaking was done to those cards on this driver from what I have read as they are newer. Simon
May 20, 201115 yr ... They did yield slightly better fps, but the image quality was not as good as the previous set 270.61. ... Weird! This was on a 580, so other cards may benefit more like the 560/550 as more tweaking was done to those cards on this driver from what I have read as they are newer.On my 460, these drivers actually give me a cockpit with less shimmering, using 8XSQ AA... so I'm keeping them. Bert
May 20, 201115 yr anyone tried using the Quadro drivers for FSX?from what I've read IQ is better for very little performance loss
May 20, 201115 yr Author Commercial Member On my 460, these drivers actually give me a cockpit with less shimmering, using 8XSQ AA... so I'm keeping them.Yes that is what I a talking about Bert.Enjoyjja Jim Allen[email protected]SkyPilot Software home of FSXAssist / P3DAssist
May 21, 201115 yr On my 460, these drivers actually give me a cockpit with less shimmering, using 8XSQ AA... so I'm keeping them.That is the setting I am using too; I liked the look of the previous set of drivers, but the performance of these!!! My panel seems more jagged and not smooth like the last set. God only knows! Simon
May 21, 201115 yr Isn´t that exactly the problem with Nvidia drivers, getting more performance, with reduced IQ?NickN:"unfortunately Nvidia changed their AA method whereby 8xS in the past delivered the IQ of 16xS today.. they did it because they know 99% of their customers would never notice and it made those new cores look so much better in benchmarks.. in other words the 400+ series (although better cores) also increases performace by reducing AA quality from the past..."http://www.simforums...topic38651.html
May 21, 201115 yr That is the setting I am using too; I liked the look of the previous set of drivers, but the performance of these!!! My panel seems more jagged and not smooth like the last set. God only knows!When I update the drivers, I find that nvidia inspector changes the very first parameterin the AA box.. and the result is a jaggy picture.You have to manually reset this to "None" and save the settings to get the previous settings back.. Bert
May 21, 201115 yr When I update the drivers, I find that nvidia inspector changes the very first parameterin the AA box.. and the result is a jaggy picture.You have to manually reset this to "None" and save the settings to get the previous settings back..Oh, maybe that is what I did wrong?I had to re-do all of the inspector settings anyhow, after the driver re-install, i do a complete re-install, and re-enter all of the items Ryan suggested...is this correct?Cheers for anyhelp,Simon Simon
May 21, 201115 yr Author Commercial Member When I update the drivers, I find that nvidia inspector changes the very first parameterin the AA box.. and the result is a jaggy picture.You have to manually reset this to "None" and save the settings to get the previous settings back..+1jja Jim Allen[email protected]SkyPilot Software home of FSXAssist / P3DAssist
May 22, 201115 yr Oh, maybe that is what I did wrong?I had to re-do all of the inspector settings anyhow, after the driver re-install, i do a complete re-install, and re-enter all of the items Ryan suggested...is this correct?Cheers for anyhelp,SimonOn my system, nvidia inspector recognizes the new drivers and maintains the existingsettings, except for the first AA setting. Don't know why.That is the only thing I reset, after a new driver install. Bert
May 22, 201115 yr On my system, nvidia inspector recognizes the new drivers and maintains the existingsettings, except for the first AA setting. Don't know why.That is the only thing I reset, after a new driver install.Cheers, on mine it clears all inspector data. I remove the drivers completely from windows via cp add remove programs and remove then re boot and then install again reboot and then add inspector settings. I may try again though.Cheers,Simon Simon
Create an account or sign in to comment