Stall Test

[Nyxx 6,993]

Hi,As much as I try I cannot find in FCOM 1 or 2, where and how to perform a Stall test as it's in the FS2Crew Captains flow.Just cannot fine it :(

[AirbusCG 52]

The switch is located on the upper overhead panel. It are 2 black switches. They are pretty much on the right.

[W1ll 0]

The aircraft has to have been AC powered for at least 2 minutes for them to work

[readyfortakeoff 11]

At 4000 agl pull power back to idle then haul back on the yoke :(

[paco-che 11]

At 4000 agl pull power back to idle then haul back on the yoke :(

:( , or ... hold the horns tightly, shake and bang 'em like you were crazy, and with a robotic voice say: 'Stall Test... Passed'

[damienw 1]

The aircraft has to have been AC powered for at least 2 minutes for them to work

It has to be powered for 4 mins

[shamrockflyer 647]

At 4000 agl pull power back to idle then haul back on the yoke :(

Let the fun begin... :( :(

[james200410 0]

Is there a minimum time the switches must be pushed into test ? or as long as you hear the warning that is considered as successful test ?

[ahsmatt7 1,199]

Is there a minimum time the switches must be pushed into test ? or as long as you hear the warning that is considered as successful test ?

you have keep the buttons pressed until the yoke actuator makes a chime sound.

[flyfed 3]

Hi,As much as I try I cannot find in FCOM 1 or 2, where and how to perform a Stall test as it's in the FS2Crew Captains flow.Just cannot fine it :(

Try page 15.10.5. An easy find from the table of contents. Tells you where things are, too.

[davierosoft 13]

What you hear is not a warning sound, is the shaker wich make the control column vibrate. This vibration is missing on the NGX (only the sound is played), so, people joking with "put the airplane at 4000AGL and stall it" are completely right if you have a force feedback joystick, it is the only way to simulate the shaker.