March 30, 201214 yr Hi,As much as I try I cannot find in FCOM 1 or 2, where and how to perform a Stall test as it's in the FS2Crew Captains flow.Just cannot fine it :( David Murden. MSFS • Fenix A320 • PMDG 737 • MG Honda Jet • 414 / TDS 750Xi • FS-ATC Chatter • FlyingIron Spitfire & ME109G • MG Honda Jet • • Fenix A320 Walkthrough PDF • Flightsim.to • DCS • A10c II • F-16c • F/A-18c • F-14 • (Others in hanger) • Supercarrier • Terrains = • Nevada NTTR • Persian Gulf • Syria • Marianas • • [email protected] All Cores HT ON • 32GB DDR4 3200MHz • RTX 3080 • TM Warthog HOTAS • TM TPR • Corsair Virtuoso XT with Dolby Atmos® • Samsung G7 32" 1440p 240Hz • TrackIR 5 & ProClip •
March 30, 201214 yr The switch is located on the upper overhead panel. It are 2 black switches. They are pretty much on the right. Greetings from the 737 flightdeck!
March 30, 201214 yr The aircraft has to have been AC powered for at least 2 minutes for them to work Will Wilson
March 30, 201214 yr At 4000 agl pull power back to idle then haul back on the yoke :( :( , or ... hold the horns tightly, shake and bang 'em like you were crazy, and with a robotic voice say: 'Stall Test... Passed' El AeropayoPaco GALINDO
March 31, 201214 yr The aircraft has to have been AC powered for at least 2 minutes for them to workIt has to be powered for 4 mins Damien WeekesCaptain 737NG / A319/20/21
March 31, 201214 yr At 4000 agl pull power back to idle then haul back on the yoke :(Let the fun begin... :( :(
March 31, 201214 yr Is there a minimum time the switches must be pushed into test ? or as long as you hear the warning that is considered as successful test ? Adam James Thermaltake Armor + | Thermaltake Tough Power 1500WT PSU | i7 920 @ OC'd 3.8Ghz | GA-EX58 Extreme | Watercooled | 18GB DDR3 @ 1600 @ 9-9-9-28 | GTX580 SOC | OCZ 120GB Agility 3 SSD for FSX, | Windows7 x64Bit RTM | 4x AOC 22" LCDs @ 1680x1050 |
March 31, 201214 yr Is there a minimum time the switches must be pushed into test ? or as long as you hear the warning that is considered as successful test ?you have keep the buttons pressed until the yoke actuator makes a chime sound. FAA: ATP-ME, 737 CA, enough time in the 757/767 to be dangerous 🤠 Matt Kubanda, 7950X3D, 64GB RAM, RTX 5090@4k, MSFS 2024
March 31, 201214 yr Hi,As much as I try I cannot find in FCOM 1 or 2, where and how to perform a Stall test as it's in the FS2Crew Captains flow.Just cannot fine it :(Try page 15.10.5. An easy find from the table of contents. Tells you where things are, too. Herman Ross Seattle, USA
April 1, 201214 yr What you hear is not a warning sound, is the shaker wich make the control column vibrate. This vibration is missing on the NGX (only the sound is played), so, people joking with "put the airplane at 4000AGL and stall it" are completely right if you have a force feedback joystick, it is the only way to simulate the shaker. Regards Andrea Daviero
Create an account or sign in to comment