********* FSUIPC4, Version 4.955 (1st June 2016) by Pete Dowson *********

Prepar3D.exe version = 3.2.3.16769

Reading options from "G:\P3D\Modules\FSUIPC4.ini"

Running inside Prepar3D v3 on Windows 7

Module base=59B30000

User Name="Paul Higginbotham"

User Addr="[email protected]"

FSUIPC4 Key is provided

WIDEFS7 not user registered, or expired

       15 System time = 13/06/2016 15:23:10

       15 FLT path = "C:\Users\Jetline\Documents\Prepar3D v3 Files\"

       15 ------ Module Version Check ------

       15        acontain.dll: 3.2.3.16769

       15             api.dll: 3.2.3.16769

       15        controls.dll: 3.2.3.16769

       15      fs-traffic.dll: 3.2.3.16769

       15             G3D.dll: 3.2.3.16769

       15        language.dll: 3.2.3.16769

       15            sim1.dll: 3.2.3.16769

       15        visualfx.dll: 3.2.3.16769

       15         weather.dll: 3.2.3.16769

       15          window.dll: 3.2.3.16769

       15 ----------------------------------

       15 Trying G:\P3D\Modules\SimConnectP3D3.dll

       15 Found it: trying to connect

       15 FS path = "G:\P3D\"

      124 ---------------------- Joystick Device Scan -----------------------

      124 Product= Saitek Pro Flight Rudder Pedals

      124    Manufacturer= Saitek

      124    Vendor=06A3, Product=0763 (Version 1.1)

      124    Serial Number= 

      124 Product= Pro Flight TPM System

      124    Manufacturer= Mad Catz

      124    Vendor=06A3, Product=0B4D (Version 1.98)

      140    Serial Number= G0007131

      140 Product= Saitek Pro Flight Yoke

      140    Manufacturer= Saitek

      140    Vendor=06A3, Product=0BAC (Version 3.4)

      140    Serial Number= 

      140 -------------------------------------------------------------------

      140 LogOptions=00000000 00000011

      140 -------------------------------------------------------------------

      140 ------ Setting the hooks and direct calls into the simulator ------

      140 --- CONTROLS timer memory location obtained ok

      140 --- SIM1 Frictions access gained

      140 --- FS Controls Table located ok

      140 --- Installed Mouse Macro hooks ok.

      140 --- Wind smoothing fix is installed

      140 --- All links okay (except older global weather setting method)

      140 -------------------------------------------------------------------

      140 SimConnect_Open succeeded: waiting to check version okay

      140 Trying to use SimConnect Prepar3D

     5038 Running in "Lockheed MartinÆ Prepar3DÆ v3", Version: 3.2.3.2 (SimConnect: 3.2.0.0)

     5038 Initialising SimConnect data requests now

     5038 FSUIPC Menu entry added

     5054 Ready Flags: Ready-To-Fly=N, In Menu=Y, In Dlg=Y

     5054 C:\Users\Jetline\AppData\Local\Lockheed Martin\Prepar3D v3\Prepar3D_Default.fxml

     5054 G:\P3D\SimObjects\Airplanes\IRIS Raptor Driver\Raptor.air

     5148 Deactivated for PID=3920, "EZCA.exe"

     5163 Memory in use: 802Mb, Avail=3294Mb

    24258 G:\P3D\SimObjects\Airplanes\A2A_Piper_PA24_250_Comanche\PA24_250.air

    61370 Ready Flags: Ready-To-Fly=N, In Menu=N, In Dlg=N

    61651 System time = 13/06/2016 15:24:12, Simulator time = 15:23:16 (15:23Z)

    61651 Aircraft="Piper Piper PA-24 Comanche (A2A)"

    65380 Memory in use: 2438Mb, Avail=1658Mb

    66971 Starting everything now ...

    66971 Note: "G:\P3D\Modules\PFCFSX.DLL", Error 126 (The specified module could not be found. )

    66971 Note: "G:\P3D\Modules\EPICINFO5.DLL", Error 126 (The specified module could not be found. )

    66971 Ready Flags: Ready-To-Fly=Y, In Menu=N, In Dlg=N

    67080 ASN active function link set

    67080 Ready for ASN WX radar

    70481 Advanced Weather Interface Enabled

    74755 Deactivated for PID=2396, "explorer.exe"

    74755 Lost focus to PID=2396, "explorer.exe"

    79529 Deactivated for PID=2396, "explorer.exe"

    79529 Lost focus to PID=2396, "explorer.exe"

   114224 Deactivated: culprit unknown

   114224 Focus lost: culprit unknown

   125549 Memory in use: 2711Mb, Avail=1385Mb

   144675 Deactivated for PID=2396, "explorer.exe"

   144675 Lost focus to PID=2396, "explorer.exe"

   185812 Memory in use: 2762Mb, Avail=1334Mb

   201912 Deactivated: culprit unknown

   201912 Focus lost: culprit unknown

   223705 Weather Mode now = Theme

   246044 Memory in use: 2842Mb, Avail=1254Mb

   306261 Memory in use: 2856Mb, Avail=1240Mb

   366430 Memory in use: 2968Mb, Avail=1128Mb

   426616 Memory in use: 2995Mb, Avail=1101Mb

   486832 Memory in use: 2994Mb, Avail=1102Mb

   546970 Memory in use: 3001Mb, Avail=1095Mb

   607249 Memory in use: 3020Mb, Avail=1075Mb

   667465 Memory in use: 3071Mb, Avail=1025Mb

   727666 Memory in use: 3076Mb, Avail=1020Mb

   787820 Memory in use: 3097Mb, Avail=999Mb

   848037 Memory in use: 3105Mb, Avail=991Mb

   908269 Memory in use: 3105Mb, Avail=991Mb

   947659 Ready Flags: Ready-To-Fly=Y, In Menu=Y, In Dlg=Y

   947659 Sim stopped: average frame rate for last 886 secs = 35.7 fps

   947659              Max AI traffic was 93 aircraft

   953228 Deactivated: culprit unknown

   953228 Lost focus to PID=4876, "ASNext.exe"

   967175 === NOTE: not calling SimConnect_Close ...

   968173 System time = 13/06/2016 15:39:19, Simulator time = 15:38:00 (15:38Z)

   968173 *** FSUIPC log file being closed

Minimum frame rate was 25.0 fps, Maximum was 60.4 fps

Minimum available memory recorded was 955Mb

Average frame rate for running time of 886 secs = 35.7 fps

Maximum AI traffic for session was 93 aircraft

Memory managed: 361 Allocs, 361 Freed

********* FSUIPC Log file closed ***********

Jack,

 

Can you post the SimObjectPaths statement section of your fsx.cfg file? The one that you use for FSX itself?

 

This is from the FSX sim not P3D as you asked for.  I hope it's what you wanted.

 

[Main]

User Objects=Airplane, Helicopter

SimObjectPaths.0=SimObjects\Airplanes

SimObjectPaths.1=SimObjects\Rotorcraft

SimObjectPaths.2=SimObjects\GroundVehicles

SimObjectPaths.3=SimObjects\Boats

SimObjectPaths.4=SimObjects\Animals

SimObjectPaths.5=SimObjects\Misc

HideMenuNormal=0

HideMenuFullscreen=1

ProcSpeed=10583

PerfBucket=7

Maximized=1

Location=0,0,1920,1080,\\.\DISPLAY1

HideInfoText=1

DisablePreload=0

FIBER_FRAME_TIME_FRACTION=0.33

SimObjectPaths.6=SimObjects\UT2 Aircraft

 

[PANELS]

I just wanted to check to make sure that your SimObjectsPaths statement for the UT2 Aircraft was correct, but it seems to be OK. I am not sure what else to suggest...

I just wanted to check to make sure that your SimObjectsPaths statement for the UT2 Aircraft was correct, but it seems to be OK. I am not sure what else to suggest...

 

Thank you Christopher, it would appear then that I just permanently lost traffic in FSX and will have to deal with that box every time I start FSX?

Now that I learned the function of those files, isn't there a way to modify the exe.xml file for FSX to remove it or redirect it?

Elaine, I have a question, I found this today, is it okay to delete it or should I keep it?

 

Thanks.

 

And I have another question.  I have Tongass X.  There's no P3D installer for it and the only thing I could find was to use the migration tool which I refuse to do.  Is there a way to install it like the way we did with UT2?

 

 

 

Elaine, I have a question, I found this today, is it okay to delete it or should I keep it?

 

Yes,  you can right Click and delete "Flightsim Estonia"

 

 

 

I have Tongass X.  There's no P3D installer for it

 

Unfortunate i don't have this Ad On but if you put this into google there are some helpful Threads   Tongass X prepar3d avsim

Yes,  you can right Click and delete "Flightsim Estonia"

 

 

 

Unfortunate i don't have this Ad On but if you put this into google there are some helpful Threads   Tongass X prepar3d avsim

Thanks Poppet, Elaine, you are a real asset to AVSIM and us all in the flight sim world. I have to tell you I am so very grateful for all you have done for me. The way you make those easy to follow screen shots with easy to follow instructions with proper directories astonishes me.

I appreciate all your patience and help you have given me, and kudos to Christopher too!

 

Best regards,

 

Jack

Well, I searched, I got nuttin. Methinks it's not going to go into my install unless someone much more clever than me finds a way. I'm not smart enough to figure it out. I wonder if I could Bribe Holger? I doubt it.

I will miss Tongass as me and my friend from the UK use it regularly in FSEconomy.

 

:(

Send Holger a PM. I have seen internet posts that indicate people are using Tongass Fjords X in P3D v3, so I am sure that he will be able to help.

Send Holger a PM. I have seen internet posts that indicate people are using Tongass Fjords X in P3D v3, so I am sure that he will be able to help.

 

Hi Christopher, a lot of other people have asked him and there's a lot of threads about it at Orbx but most of them boil down to using that migration tool.

A couple of guys posted about how to do it similar to the UT2 install.

 

On that note, in order for me to not keep getting that UT2 runtime error in FSX is there a way to remove the calls to it in the exe.xml or the dll.xml or Simconfig or any other files?

Elaine, I have a question.

 

P3D and FSX are so much alike in these two files it's not funny.

 

First, this is what I did, I backed up my FSX.cfg from the FSX older not P3D, same for the exe.xml.

Then I removed all references to UT2.

Now when I run FSX I do not get the UT2 Runtime error.

But, I still have no FSX AI traffic.

I was wondering if I missed removing a line somewhere in a some file that makes a call to UT2 for FSX.

I would like to get the basic AI traffic back in FSX.

 

UT2 is working splendidly in P3D.

 

Thanks.

 

 

I would like to get the basic AI traffic back in FSX.

 

I'm not sure Jack but you could try this location first,   FSX ► Scenery ► World ► scenery  

 

The box in Red,  Whats does yours say?? 

 

I searched my entire PC and I don't have that file.  I triple checked the spelling too.

Not on C, D, E, G, or X

I got a trafficAircraft.utb in P3D

Give me a screen shot of the inside of this folder    FSX ► Scenery ► World ► scenery  

Give me a screen shot of the inside of this folder    FSX ► Scenery ► World ► scenery  

 

Its there Jack,  8'th one up from the bottom,  Right Click and remove the utb and put bgl at the end,  Just like mine  

 

It should read   trafficAircraft.bgl   Don't forget the full stop .  

Its there Jack,  8'th one up from the bottom,  Right Click and remove the utb and put bgl at the end,  Just like mine  

 

It should read   trafficAircraft.bgl   Don't forget the full stop .  

 

Ok will do and get back to you in a few as wife has me busy, but you told me to look for a .bgl so that's why I was confused.