March 23, 201610 yr Author Ray, my head is spinning, not sure what the step by step mod is.. i have all Berts mods...not sure if you edited your first posts after getting info from Ray, or do i follow your later post's. I f you have time maybe a quick step set up.or if i just have to follow post number one. Thank you for all you and all other's for the hard work. Bob Edit: I;m going to buy the CJ now....lol OK this is the 1,2,3, for adding the Flight1 GTN750 to the Carenado CJ2 VC panel. There are always several methods or ways to do anything. This is one way to add the F1GTN750 to the VC of the Carenado CJ2. This will change all your CJ2 planes. You can choose to only change one or two if you like, but, you are on your own for that. You can find Bert's instructions for the Hawker GTN and use that method by adding gtn or something unique to a panel file and also to the chosen texture files in several places. This changes all of them. 1. Go find your Carenado Hawker GTN panel folder. Copy the CARProline21 folder to your Carenado CJ2 panel folder. 2. Make a full backup of your CJ2 Panel folder then edit the panel.cfg file as follows. The // is just to keep the original in case of a screw up or you change your mind. Copy the full line that you intend to change and add the // to the original and modify the other. 3. Change the Carenado CJ2 panel.cfg file as follows: (I changed the gauge05 line for a better fit of the GTN inside the MFD picture frame.) [Window00] gauge01=CARPROLINE21!HS25B_GTN_PFD, 1,0,1046,1300 //gauge01=CARPROLINE21_HS25B_GTN_pfd, 1,0,1046,1300 [Vcockpit01] gauge04=CARPROLINE21!HS25B_GTN_PFD, 0, 0, 512, 636 //gauge04=CARPROLINE21_CJ2525A!HS25B_pfd, 0, 0, 512, 636 //gauge05=CARPROLINE21_CJ2525A!HS25B_mfd_pilot, 512, 0, 512, 636 gauge05=F1GTN!GTN750, 516, 40, 540, 580, UNIT1.VC, //this is a better fit inside the MFD panel [Vcockpit04] //gauge00=FMS_6000_CJ2525A!FMC_6000_config, 0,0, 1, 1 //gauge01=FMS_6000_CJ2525A!FMC_6000, 0,0,464,512 gauge02=CJ2525ACAR!Toggle213, 0, 0, 512, 16 4. Save your work. Go Fly. Regards, Ray When Pigs Fly . Ray Marshall .
March 24, 201610 yr Too many airplanes, not enough time.. Add me to that reason too. If you are fully retired and find no time, then it's hopeless for me then. :smile: Anyway, I may pick this one up one day. Vu Pham i7-13700K 5.2 GHz OC, 64 GB RAM, RTX5090, SSD for Sim, SSD for system. MSFS2020, XP-12, DCS
March 24, 201610 yr Hi Ray, the GTN750 is there in the VC, but no pop up....when i hover over the click spot the little hand shows, but nothing happens when i click it. edit: i got it...had to use GTN cfg tool :Whew:
March 24, 201610 yr raymar .. thank you very much! Jakub CompelPMDG Prepar3d 777-200LR/F & 777-300ER , 737-900/800-700/600 Customer, Aerosoft A318/319, Twin Otter, A2A C172, Majestic Software Dash 8 Q400, RealAir Lancair Legacy V2, MILVIZ B350i, B737-200, TFDi 717, Flight1 GTN 750/650, HiFi ASN2016, ChasePlane, FsPassenger, GSX, Simstarter NG Intel i7 5820k@4,6Ghz - water ,MSI X99A Rider ,32GB RAM 2666MHz-Quad ,GPU GTX1070 , SB - Z (Logitech Z-5500) ,SSD Intel 520 120GB+SSD Kingston V300 120GB , 2TB+2TB, LG-GGW-H20L Blu-ray,Zdroj 700W Cooler Master, ASUS 27"+ LG 24"
March 24, 201610 yr Author Hi Ray, the GTN750 is there in the VC, but no pop up....when i hover over the click spot the little hand shows, but nothing happens when i click it. edit: i got it...had to use GTN cfg tool :Whew: Yep, you need to have a popup window to popup. You can either add a [windowxx] or use the F1 Config tool. Glad you have the CJ2 and the GTN. Enjoy. Regards, Ray When Pigs Fly . Ray Marshall .
March 24, 201610 yr Hi Folks, So - my knowledge level is pretty low on biz jets (experience limited to the default Lear - so far) - are these changes realistic ??? Do most jets today use Garmin's for navigation or would they rely on their FMC ??? If using Garmin's would they actually remove the FMC ??? From what I've read the real incentive for this work is that the FMC doesn't seem capable of a "Direct To" or "LPV Approaches" ??? Thanks... Regards,Scott
March 24, 201610 yr Author Hi Bert, Thanks so much... I'll take a gander... Regards, Scott Scott, Only recently, last year or so, have the Garmin G600 and GTN750 started making their way into the older biz jets in any numbers. The big feature seems to be the moving maps and LPV approaches plus the general ease of use. Most of the older jets didn't really have a good GPS that was coupled. Check out SIJET.com for some of the panel upgrades offered. I got an email a few days ago offering a S/II with G600 and dual GTN750s with a new interior and new paint for less than a mill. I think it is the one in the video that Bert linked. Regards, Ray When Pigs Fly . Ray Marshall .
March 24, 201610 yr I can not get the NAV to engage with the GTN750..it shows GPS on the PFD, GPS on the GTN CDI AP is on but NAV will not engage on the AP window
March 24, 201610 yr Author I can not get the NAV to engage with the GTN750..it shows GPS on the PFD, GPS on the GTN CDI AP is on but NAV will not engage on the AP windowDo you have the GTN set as the 'Active Nav Source'? SD card slot on GTN Cycle through your selections again. Also try the AP popup to select NAV there. Ray When Pigs Fly . Ray Marshall .
March 25, 201610 yr I can not get the NAV to engage with the GTN750..it shows GPS on the PFD, GPS on the GTN CDI AP is on but NAV will not engage on the AP window I have the same problem that has just surfaced. I will check the other items as well.
March 25, 201610 yr Hi guys, Same here! Everyting is working except NAV mode. In the F1GTN config tool I changed the "Select Autopilot Option" to "Heading Hold" instead of "NAV" as a kind of interim solution until a fix is available. Cheers,Michael
Archived
This topic is now archived and is closed to further replies.