Mangouste

Problem Carenado Cheyenne III

Recommended Posts

Help AVSIM continue to serve you!
Please donate today!

I think actualy that Carenado make a .exe only for f1 gtn750... The rxp gtn is a very recent addon published after the aircrafts creations, 

The only way in this case is to place the gtn manualy... I can't do it.

No sure that Carenado shall update rapidely all aircrafts, perhaps slowly with other versions.

Share this post


Link to post
Share on other sites

HI

No, this plane has just been released is the Cheyenne III. So Carenado had to consider the latest RXP GTN for prepar3D V4.

Thank you.

Share this post


Link to post
Share on other sites

Understand your dream.

But the Cheyenne iii was in end of betatest when rxp is coming. Don't think that a betatest is stopped and reported near the publishing.

In the future the rxp gtn integration may be a commercial argument for Carenado but they have no obligation to do it... Hope and see.

Share this post


Link to post
Share on other sites

Understand me well, at some it works and not at home, so I come looking for a solution, if someone has one. No more.

Share this post


Link to post
Share on other sites
5 hours ago, Mangouste said:

Carenado had to consider the latest RXP GTN for prepar3D V4.

They may consider the latest RXP GNS V2 as well!

4 hours ago, ms2 said:

the rxp gtn integration may be a commercial argument for Carenado but they have no obligation to do it... Hope and see.

They are already publishing their new X-Plane aircraft with Reality XP GTN 750/650 Touch option (and GNS V2 integration over the default GPS in X-Plane is easy manually).

I'm certain given the time they'll progressively support our new Garmin devices gradually. In the meantime, our GTN offers a lot of integration options which shall make quite 'easy' to retrofit.

NB: the GNS V2 includes the GPS 500 (the radio-less version of the GNS 530), which replaces the fltsim default gps easily as well.

 

Share this post


Link to post
Share on other sites

I made the purchase of both at RXP, the one for XP 11 and the one for Prepar 3D V4 and I'm happy. If anyone knows how to integrate it in the cabin of Cheyenne III I am a taker of information, thank you.

  • Upvote 1

Share this post


Link to post
Share on other sites
39 minutes ago, Mangouste said:

I made the purchase of both at RXP, the one for XP 11 and the one for Prepar 3D V4 and I'm happy. If anyone knows how to integrate it in the cabin of Cheyenne III I am a taker of information, thank you.

Did you run the RXP GTN Configurator in the P3Dv4 Add-ons menu?

All you have to do is tell the RXP GTN Configurator to replace the Flight1 GTN 750 entries with no bezel.

Cheers,

Jerome

Share this post


Link to post
Share on other sites

Hi Folks,

Yep - here’s to hoping Carenado starts supporting the full complement of 3rd Party Gauges - since their own aren’t that great. 

Ive opened numerous tickets stating same - if EVERYONE did this maybe they would take note ?!?!?

Regards,

Scott

  • Upvote 1

Share this post


Link to post
Share on other sites
7 hours ago, Mangouste said:

Hello

I have very problem GTN 750 and carenado , Prepar3D V4.

 

 

Can you post the contents of your panel.cfg file?

 

Share this post


Link to post
Share on other sites
4 hours ago, bills511 said:

Can you post the contents of your panel.cfg file?

 

There is nothing in the pannel that refers to the RXP GTN 750 gauges, since I only use the RXP POP UP that I configured to have the pop up. The Carenado utility to insert the 750 only works for the F1 version.

[Window Titles]
Window00=GPS 530
Window01=AUTOPILOT
Window02=WINDOW MANAGER
Window03=INFO
Window04=ENGINE SETUP
Window05=KNOB INFO
Window06=Reality XP GTN Unit 1 (managed)

Share this post


Link to post
Share on other sites
4 hours ago, Mangouste said:

The Carenado utility to insert the 750 only works for the F1 version.

Yes. But you can still install RXP GTN 750 into VC with the gauge assistant.

Share this post


Link to post
Share on other sites
5 minutes ago, bills511 said:

Yes. But you can still install RXP GTN 750 into VC with the gauge assistant.

Do you think I spent time trying. The screen remains black. Only the pop up works.
I sent the Carenado utility and I even got to insert the GTN RXP into it, but since it was horrible I took it all away.

Share this post


Link to post
Share on other sites

hi

The first attempt was disastrous. I told myself with all the tests that I did probably the files are no longer good. I uninstalled the Carenado, well cleaned with CCleaner and reinstalling By following your instructions for installing the RXP GTN.

Now it works well, thank you for taking time for these explanation, thank you.

  • Upvote 2

Share this post


Link to post
Share on other sites
1 minute ago, Mangouste said:

Now it works well, thank you for taking time for these explanation, thank you.

You are most welcome. Glad you have it working.

Share this post


Link to post
Share on other sites
2 hours ago, bills511 said:

1. Start with an unmodified panel.cfg file.

This is the original panel.cfg that installs with the aircraft:

  Reveal hidden contents

//*********************************************************
// CARENADO PA42 Cheyenne III FSX/P3D
// Copyright © Carenado 2017 - All Rights Reserved
//*********************************************************

[Window Titles]
Window00=GPS 530
Window01=AUTOPILOT
Window02=WINDOW MANAGER
Window03=INFO
Window04=ENGINE SETUP
Window05=KNOB INFO

[VIEWS]
VIEW_FORWARD_DIR=-1.000, 0.000, 0.000


//--------------------------------------------------------
[Window00]
Background_color=8,8,8
size_mm=524,378
visible=0
ident=0
window_size= 0.310,  0.370
window_pos=  0.650,  0.060
no_luminous=1
zorder=7


gauge00=GPS530_3D_PA42!GPS_530,   0,0,520,378
gauge01=PA42CAR!ToggleCAR530,    64,0,384, 32

// windowssizeX = (window_sizeY * size_mmX / size_mmY) * 9 / 16
//--------------------------------------------------------
[Window01]
Background_color=0,0,0
size_mm=768 , 778
visible=0
ident=10130
position=5
no_luminous=1

window_size= 0.277, 0.550
window_pos=  0.700, 0.450

gauge00=GAUGE_PA42AP!Gauge_ANUM_AUTOPILOT,       0,   0,768,240
gauge01=GAUGE_PA42AP!Gauge_AUTOPILOT_PA31T,       0, 240,768,303

gauge02=GAUGE_PA42AP!Gauge_KAS297,          0, 543,512,235
gauge03=PA42CAR!Toggle10130,             0,   0,512,16


// windowssizeX = (window_sizeY * size_mmX / size_mmY) * 9 / 16
//--------------------------------------------------------
[Window02]
Background_color=0,0,0
size_mm=500,237
position=0
visible=0
ident=796
window_size= 0.241, 0.240
window_pos= 0.020, 0.120
zorder=5


gauge00=PA42CAR!Control_windows,  0,0,500,237

//--------------------------------------------------------
[Window03]
Background_color=0,0,0
size_mm=600,490


window_size= 0.344, .500

position=3
visible=0
nomenu=1
ident=10060


gauge00=PA42CAR!StartWindowsAircraft ,   0,  0, 600,490

//--------------------------------------------------------
[Window04]
Background_color=0,0,0
size_mm=600,490
window_size= 0.344, .500
position=5
visible=0
nomenu=1
ident=10050


gauge00=PA42CAR!StartWindows ,   0,  0, 600,490


// windowssizeX = (window_sizeY * size_mmX / size_mmY) * 9 / 16
//--------------------------------------------------------
[Window05]
size_mm=555,142
window_size_ratio=1.000 
position=0
visible=1
ident=10030
no_luminous=0
window_size= 0.235, 0.107
window_pos=  0.020, 0.020

gauge00=PA42CAR!info ,   0,  0, 555,142
gauge00=PA42CAR!Toggle10030,  0,0,25,25


//--------------------------------------------------------
[Vcockpit01]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=512,512
texture=$Panel_1

gauge00=GPS530_3D_PA42!GPS_530_3D,    0,  0, 512, 372
gauge01=PA42CAR!ToggleCAR530,     64,0, 256, 32
gauge02=GAUGE_PA42!Gauge_UPDATE_DIG,              0,  0, 1,  1

//--------------------------------------------------------
[Vcockpit02]
Background_color=0,0,0
size_mm=512,512
visible=1
pixel_size=512,512
texture=$Panel_2


gauge00=;Radio_PA42!RadioAudio,          14,    4,484, 94

gauge01=GAUGE_PA42!Radio_KR87_ADF_2D,       13,  396,485, 100
gauge02=DIGTTRANS_PA42!transponder,     0,  242, 512,130
gauge03=GAUGE_PA42!Radio_KN62A_DME,      13,  113,485, 100
gauge04=GAUGE_PA42!Gauge_DME_HSI,       0,  4,447, 100

gauge05=CARSound_PA42III!CarSound,         0,    0,  1,   1

gauge06=PA42_GPSWX!GPS_WX, 0,0,1,1


//--------------------------------------------------------
[Vcockpit03]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=513,513
texture=$Panel_3


gauge00=GAUGE_PA42AP!Gauge_AUTOPILOT_PA31TVC,    0, 160,382, 152
gauge01=GAUGE_PA42AP!Gauge_ANUM_AUTOPILOTVC,  0,  0,512, 160

gauge02=GAUGE_PA42AP!Gauge_KAS297VC,    0, 311,254,118
gauge03=GAUGE_PA42!Radio_KDI572_DME,       256, 311,253,101

gauge04=GAUGE_PA42!Gauge_Anum_MASTER_WARNING,              0,  0, 1,  1

//--------------------------------------------------------
[Vcockpit04]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=512,512
texture=$Panel_4

gauge00=WX_Gauge_3D_PA42III!WXGauge,  9,9,492,309


//--------------------------------------------------------
[Vcockpit05]
Background_color=0,0,0
size_mm=1024,1024
visible=0
pixel_size=1025,1025
texture=$Panel_5


gauge00=GAUGE_PA42!Gauge_Anum_L1,      0, 170, 1024, 66
gauge01=GAUGE_PA42!Gauge_Anum_R1,      0, 250, 1024, 66

gauge02=GAUGE_PA42!Radio_CTL22_COM2,         0, 0, 143, 152
gauge03=GAUGE_PA42!Radio_CTL32_NAV2,         153, 0, 143, 152

gauge04=GAUGE_PA42!Gauge_CLOCK_DIG,          0, 327, 259, 197



Day=255,255,255
Night=225,117,89
Luminous=200,200,101

[Default View]
X=0
Y=0
SIZE_X=8192
SIZE_Y=6143

2. Run F1GTN750PA42.exe.

3. Launch sim.

Panel before installing RXP GTN750:

http://48VtCGc.jpg?1

4. Goto menu | add-ons | Reality XP GTN Setup Aircraft.

http://9X1nWWn.jpg?1

Check on No Bezel

http://3edBKcM.jpg?1

http://SDQNhQk.jpg?1

http://suoJGOR.jpg?1

9. Review Reality XP GTN Touch FltSim.pdf.

That post should be pinned and locked as a Topic because it is a great illustration of the process.

  • Upvote 2

Share this post


Link to post
Share on other sites
1 hour ago, fppilot said:

That post should be pinned and locked as a Topic because it is a great illustration of the process

It is a good idea and thank you Bill for sharing these steps!

The pinned topics is getting crowded, but given the aircraft was just released I'll pin the topic for a couple weeks.

Share this post


Link to post
Share on other sites
Just now, RXP said:

The pinned topics is getting crowded, but given the aircraft was just released I'll pin the topic for a couple weeks.

I suggested the pinned topic not relative to the aircraft, but to the great illustration of how to execute selections in the aircraft setup module (for any aircraft).

Share this post


Link to post
Share on other sites

And a slight addendum to this thread.  If you want the DirectTo and HOME buttons in the VC to work I've got some xml files for that.  I just hate having an inop DTO button in the VC.  I don't really care about the other buttons.

  • Upvote 1

Share this post


Link to post
Share on other sites
3 hours ago, ryanbatcund said:

And a slight addendum to this thread.  If you want the DirectTo and HOME buttons in the VC to work I've got some xml files for that.  I just hate having an inop DTO button in the VC.  I don't really care about the other buttons.

Sent you a PM.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now