February 20, 20188 yr On 1/16/2018 at 2:53 PM, Shaun Slade said: KSMY... Louis Armstrong New Orleans International Airport is having a new terminal soon, the others are potentials. But, I'm working on one ATM which I will announce soon! After that, I will have to see, these others are on my shortlist btw. Thanks for the suggestions though. Kind regards, Shaun. Hi: How about KTUS? Gigabyte x670 Aorus Elite AX MB; AMD 7800X3D CPU; Deepcool LT520 AIO Cooler; 64 Gb G.Skill Trident Z5 NEO DDR5 6000; Win11 Pro; P3D V5.4; 1 Samsung 990 2Tb NVMe SSD: 1 Crucial 4Tb MX500 SATA SSD; 1 Samsung 860 1Tb SSD; Gigabyte Aorus Extreme 1080ti 11Gb VRAM; Toshiba 43" LED TV @ 4k; Honeycomb Bravo.
February 27, 20188 yr On 1/12/2018 at 5:14 PM, lewblok said: Shaun, the airport is awesome. I live in Amarillo and love your work. One question I have is my control+j will not move the jetway while parked at gate 10. It was working before Kama download. Again good job and thanks. lewblok Shaun, how would I get the update to correct the runway numbers, 22 on runway 4 and no runway markings on 22
July 2, 20187 yr I have all SXAD airports except Exeter, Lydd and Block Island. My two most recent purchases were KAMA and Aeroflex-Andover. I bought KAMA from the US store of PC Aviator and the other one from Simmarket and tried to install them on the same day. I have never had a problem with installing SXAD scenery but whilst Aeroflex installed without a hitch, my AV, Avast, kept telling me KAMA had Win 32:L Malware-gen and kept deleting oitfrom the download before I could install it. Although I have occasionally experienced this type of problem when installing an aircraft, I have not experienced it with an airport. It seemed to me that if it is an essential component of KAMA which is causing this, why has there not been the same component in my other SXAD products to also cause a problem? Has anyone else experienced this with KAMA and is it a false positive? Gary
July 2, 20187 yr I have not had any problems installing SXAD airports. I have KAMA, KBHM and KBNA. Using Win10-64 and P3Dv4. I Earned My Spurs in Vietnam
September 4, 20187 yr Author Commercial Member On 2/27/2018 at 11:30 PM, lewblok said: Shaun, how would I get the update to correct the runway numbers, 22 on runway 4 and no runway markings on 22 I'm really sorry for not replying sooner! Support is best sent to SXAD at Outlook.com Could you post a screen shot of what you mean? I can't see any issues with the markings.
September 4, 20187 yr Author Commercial Member On 7/2/2018 at 7:12 AM, Gartro said: I have all SXAD airports except Exeter, Lydd and Block Island. My two most recent purchases were KAMA and Aeroflex-Andover. I bought KAMA from the US store of PC Aviator and the other one from Simmarket and tried to install them on the same day. I have never had a problem with installing SXAD scenery but whilst Aeroflex installed without a hitch, my AV, Avast, kept telling me KAMA had Win 32:L Malware-gen and kept deleting oitfrom the download before I could install it. Although I have occasionally experienced this type of problem when installing an aircraft, I have not experienced it with an airport. It seemed to me that if it is an essential component of KAMA which is causing this, why has there not been the same component in my other SXAD products to also cause a problem? Has anyone else experienced this with KAMA and is it a false positive? Gary Hi, Apologies for the late reply! Have you managed to resolve this? AFAIK there is nothing different in KAMA than in my other Airports. Scanning with Kapersky gives a clear result for me. Kind regards, Shaun
September 5, 20187 yr Shaun I am assuming that the problem remains with KAMA. After my post, I had a couple of more tries with the same outcome and then put the download to one side and have not revisited it in the past two months, especially as I have not experienced a similar problem with installing about ten other airports which I have purchased in that intervening period. Gary
September 5, 20187 yr Author Commercial Member 15 hours ago, Gartro said: Shaun I am assuming that the problem remains with KAMA. After my post, I had a couple of more tries with the same outcome and then put the download to one side and have not revisited it in the past two months, especially as I have not experienced a similar problem with installing about ten other airports which I have purchased in that intervening period. Gary Hi, I'm sorry this is the case. If I get a false positive from kapersky or windows, usually can override it. Perhaps you protection's updated definitions might have fixed this flag also. Kind regards, Shaun.
May 28, 20197 yr Shaun: Where and how do I get the update to V1.1? I went to sxad @outlook.com, but saw nothing about the update. Thanks! Lewis Block Edited May 28, 20197 yr by lewblok
November 24, 20196 yr Author Commercial Member Hi, Sorry for the late reply. v1.01 was sent to distributors. If you download the airport and run the installer again, it should update it. Kind regards. Shaun.
March 2, 20206 yr Where can I download SXAD_KAMA_Dark_Photoscenery.exe? It was not included in the KAMA 1.04 download.
May 1, 20206 yr Author Commercial Member Sorry for the ridiculously late reply. It's at the bottom of my website page. Link is here: https://drive.google.com/file/d/1hO1fzUeBLEhpGQ71XT0dAFyK6Zpn0FVi/viewhttps://drive.google.com/file/d/1hO1fzUeBLEhpGQ71XT0dAFyK6Zpn0FVi/view
June 19, 20205 yr Thanks for a great airport. Is it possible to turn off the static aircraft at KAMA? I have the latest version.
June 20, 20205 yr Author Commercial Member On 6/19/2020 at 2:56 PM, gettwisted said: Thanks for a great airport. Is it possible to turn off the static aircraft at KAMA? I have the latest version. Hi, Unfortunately not, but I might be able to change that once I make the P3Dv5 update. Kind regards, Shaun.
Archived
This topic is now archived and is closed to further replies.