July 16, 20187 yr Should I enable it ? Does it mean speed-trees are used instead and I can expect some optimization when I enable trees and autogen ? Or should I leave it unticked ? What about the ORBX FTX Global trees option ? Is it a good choice or not for a low end PC ? Thx ! Flying gliders since 1980 Flightsimming since 1992 AMD Ryzen 5600x, 32GB RAM, GPU Nvidia RTX 3060 Ti 8 GB, 1 TB and 500 GB nvme2 SSD drives, HP 27" 60Hz LED monitor @ 1920x1080, T16000, Hotas from old X52 Pro, Saitek Combat Rudder Pro (2010 model)
July 16, 20187 yr 20 minutes ago, jcomm said: Should I enable it ? Does it mean speed-trees are used instead and I can expect some optimization when I enable trees and autogen ? Or should I leave it unticked ? What about the ORBX FTX Global trees option ? Is it a good choice or not for a low end PC ? Thx ! Don't tick it Jose', it will give you FPS grief. System: MSFS2024, ASUS Rog Stryx Z790-A, Intel i9-14900KF, Asus ROG Ryujin III 360 , Asus Hyperion Case,Rog Stryx 4090 OC, Samsung 970 EVO M.2 SSD, 1Tb Samsung 860 EVO SSD,64Gb G Skill Memory, Asus Aura 1200W Gold PSU,Win 11 ,LG C4 48" 4K OLED Screen., Airbus TCA Full Kit, Stream Deck XL. WinWing FCU, EFIS, MCDU
July 16, 20187 yr I Replaced them with Orbx HD trees. David Murden. MSFS • Fenix A320 • PMDG 737 • MG Honda Jet • 414 / TDS 750Xi • FS-ATC Chatter • FlyingIron Spitfire & ME109G • MG Honda Jet • • Fenix A320 Walkthrough PDF • Flightsim.to • DCS • A10c II • F-16c • F/A-18c • F-14 • (Others in hanger) • Supercarrier • Terrains = • Nevada NTTR • Persian Gulf • Syria • Marianas • • [email protected] All Cores HT ON • 32GB DDR4 3200MHz • RTX 3080 • TM Warthog HOTAS • TM TPR • Corsair Virtuoso XT with Dolby Atmos® • Samsung G7 32" 1440p 240Hz • TrackIR 5 & ProClip •
July 16, 20187 yr Going from normal p3d trees to orbx trees, I noticed a little boost in fps about 5 fps. AMD Ryzen 5900X - Asus Crosshair VI Hero - G.Skill 32GB (2x16GB) 3000 C14 DDR4 @ 3600 14-14-15-14-28-42 AMD Red Devil Radeon 6900XT 2700/2112 1125mv - 3 x Iiyama G-Master GB2888UHSU 4k @ 11560x2160 Saitek X-55 Rhino - Track IR5 - Obutto Sim Cockpit + Triple Monitor Stand - Fancy some Techno? https://www.mixcloud.com/dj_bully/
July 16, 20187 yr Don't use them, at least not yet. More performance intensive and they look awful. They have this colour that doesn't really seem to blend in with the terrain. Use either TerraFlora or OrbX's trees. [MSI MPG X870E Carbon | 9800X3D (PBO +200Mhz / -20 Offset) | Corsair 64GB DDR5 (Custom Timings) | RTX 4090 Founders Edition (Undervolted) | WD SNX 850X 4TB + 4TB | Antec Flux Pro]
July 16, 20187 yr Author Thanks for the precious feedback guys! Flying gliders since 1980 Flightsimming since 1992 AMD Ryzen 5600x, 32GB RAM, GPU Nvidia RTX 3060 Ti 8 GB, 1 TB and 500 GB nvme2 SSD drives, HP 27" 60Hz LED monitor @ 1920x1080, T16000, Hotas from old X52 Pro, Saitek Combat Rudder Pro (2010 model)
July 16, 20187 yr Just a note to say that FTX Trees HD does nothing for Speed Trees (Dynamic 3D Autogen Vegetation option in the sim), it replaces the textures on the conventional autogen trees only. Can't say I noticed any difference with Trees HD in terms of performance, they are twice the resolution of defaults so if anything they might cause a very slight drop. Speed Trees are a whole other matter and apparently quite FPS heavy. Edited July 16, 20187 yr by ckyliu ckyliu, proud supporter of ViaIntercity.com. i5 12400F, 32GB, RTX4070, more in "About me" on my profile.
July 16, 20187 yr 2 minutes ago, ckyliu said: Just a note to say that FTX Trees HD does nothing for Speed Trees (Dynamic 3D Autogen Vegetation option in the sim), it replaces the textures on the conventional autogen trees only. Yes you have to un-tick the box. David Murden. MSFS • Fenix A320 • PMDG 737 • MG Honda Jet • 414 / TDS 750Xi • FS-ATC Chatter • FlyingIron Spitfire & ME109G • MG Honda Jet • • Fenix A320 Walkthrough PDF • Flightsim.to • DCS • A10c II • F-16c • F/A-18c • F-14 • (Others in hanger) • Supercarrier • Terrains = • Nevada NTTR • Persian Gulf • Syria • Marianas • • [email protected] All Cores HT ON • 32GB DDR4 3200MHz • RTX 3080 • TM Warthog HOTAS • TM TPR • Corsair Virtuoso XT with Dolby Atmos® • Samsung G7 32" 1440p 240Hz • TrackIR 5 & ProClip •
July 16, 20187 yr P3D managed to do something awful to speed-trees, which are very very good in other programs. I can only recommend to avoid the setting. We are all connected..... To each other, biologically...... To the Earth, chemically...... To the rest of the Universe atomically. Devons rig Intel Core i5 13600K @ 5.1GHz / G.SKILL Trident Z5 RGB Series Ram 64GB / GIGABYTE GeForce RTX 4070 Ti GAMING OC 12G Graphics Card / Sound Blaster Z / Meta Quest 2 VR Headset / Klipsch® Promedia 2.1 Computer Speakers / ASUS ROG SWIFT PG279Q ‑ 27" IPS LED Monitor ‑ QHD / 1x Samsung SSD 850 EVO 500GB / 2x Samsung SSD 860 EVO 1TB / 1x Samsung - 970 EVO Plus 2TB NVMe / 1x Samsung 980 NVMe 1TB / 2 other regular hd's with up to 10 terabyte capacity / Windows 11 Pro 64-bit / Gigabyte Z790 Aorus Elite AX Motherboard LGA 1700 DDR5
July 16, 20187 yr Author I'll speed up home to untick :-) I want my P3Dv4 smooth as silk for the Buses :-) Flying gliders since 1980 Flightsimming since 1992 AMD Ryzen 5600x, 32GB RAM, GPU Nvidia RTX 3060 Ti 8 GB, 1 TB and 500 GB nvme2 SSD drives, HP 27" 60Hz LED monitor @ 1920x1080, T16000, Hotas from old X52 Pro, Saitek Combat Rudder Pro (2010 model)
Archived
This topic is now archived and is closed to further replies.