Jump to content

pete_auau

sf tech update rex

Recommended Posts

Its now  released  just  start  sf  and  update

  • Upvote 3

Share this post


Link to post

It appears that I can finally sit at a busy airport gate (in this case, FlyTampa's CYYZ) at night and not get that annoying whitewash effect. I have HDR on in P3D and manual lighting off in REX SF and I must saying it's looking real good. I cannot remember ever seeing the night lighting looking this good before. Can anyone chime in on their findings re night lighting?

Share this post


Link to post
24 minutes ago, tamsini said:

It appears that I can finally sit at a busy airport gate (in this case, FlyTampa's CYYZ) at night and not get that annoying whitewash effect. I have HDR on in P3D and manual lighting off in REX SF and I must saying it's looking real good. I cannot remember ever seeing the night lighting looking this good before. Can anyone chime in on their findings re night lighting?

I  think  you  meant   turn off manual  light in  ef  not  sf  🙂  any  way   yep  just loaded in  cyyz   and its looking  great

Share this post


Link to post
13 minutes ago, pete_auau said:

I  think  you  meant   turn off manual  light in  ef  not  sf  🙂  any  way   yep  just loaded in  cyyz   and its looking  great

Indeed you're right. Can never get abbreviations right - and don't get me started on acronyms!

  • Upvote 1

Share this post


Link to post
2 hours ago, pete_auau said:

Its now  released  just  start  sf  and  update

We are talking SkyForce 3d?

Share this post


Link to post
55 minutes ago, cyyzrwy24 said:

We are talking SkyForce 3d?

yes  sf   sky  force  just open up  your  skyforce  and  it  will  show  a  update, if  not  go  to  settings update   and  click  check  for  updates

Share this post


Link to post
8 hours ago, pete_auau said:

yes  sf   sky  force  just open up  your  skyforce  and  it  will  show  a  update, if  not  go  to  settings update   and  click  check  for  updates

@cyyzrwy24 meant that the topic is about SF (SKY FORCE) and you guys talk about lights which obviously is EF (ENVIRONMENT FORCE)...

Share this post


Link to post
1 minute ago, GEKtheReaper said:

@cyyzrwy24 meant that the topic is about SF (SKY FORCE) and you guys talk about lights which obviously is EF (ENVIRONMENT FORCE)...

Yes that was my bad. 

Share this post


Link to post
11 hours ago, pete_auau said:

yes  sf   sky  force  just open up  your  skyforce  and  it  will  show  a  update, if  not  go  to  settings update   and  click  check  for  updates

When I open no auto update, setting update reports that I have current version #5.0.2018.0520. I haven't opened SF for sometime, since EF doesn't need it....

Whats the latest version?

Share this post


Link to post
1 hour ago, cyyzrwy24 said:

Whats the latest version?

5.0.2019.0514

Share this post


Link to post

Well, how do I get it than...? Tried REX Downloader nothing, manual update on it, still reports nothing, opened SF no auto, go to manual it says I have latest and not available.....

Share this post


Link to post
4 minutes ago, cyyzrwy24 said:

Well, how do I get it than...? Tried REX Downloader nothing, manual update on it, still reports nothing, opened SF no auto, go to manual it says I have latest and not available.....

The latest version is available in the Rex File Transfer manager. You're on the pre-2.1 version, which can't be updated over. You need to download the full 0514 installer.

Share this post


Link to post
49 minutes ago, bbuckley said:

https://www.realenvironmentxtreme.com/forums/index.php?/topic/51805-rex-5-sky-force-3d-technical-update-22-released/

See this post at REX support forum. Since you don't have 5.0.2019.0410 you will need to get the complete .0514 download from the store where you purchased SF. See the post for more info.

Problem with rex is that I am unable to log in for months...! In spite, that I changed several times my password, I am able only to log in in their tweeter page?! Ricardo is aware of that and he he said he will look in to that and nothing happens. So not sure what's with them really. But I can't see important posts on their support forum and guess what, I have almost everything by them. Great customer service they have....

Share this post


Link to post
1 hour ago, Sethos1988 said:

The latest version is available in the Rex File Transfer manager. You're on the pre-2.1 version, which can't be updated over. You need to download the full 0514 installer.

I am able to log in to the store (go figure, that one works for me), I can download complete SF..... would that be updated to newest version? I think no, because when I did re-installation past January I did the same and obviously got older version from 2018 when I purchased.....After that I never got "warned" that new version is available.....that's why I got stuck on old one....

I feel dumb now since I have to ask questions on this Forum and not on theirs....

Share this post


Link to post
1 minute ago, cyyzrwy24 said:

I am able to log in to the store (go figure, that one works for me), I can download complete SF..... would that be updated to newest version?

Depends on the version you can download, needs to be at least 0410 to allow for automatic updates inside SF3D or 0514, then you get the latest version. If you're downloading any other version than that, it's pre-2.1 and can't be auto-updated.

Share this post


Link to post
Just now, Sethos1988 said:

and can't be auto-updated.

I assume that's true, but question is, since I can log into my account and download complete package, would that  include latest and current version...?

Share this post


Link to post
Just now, cyyzrwy24 said:

I assume that's true, but question is, since I can log into my account and download complete package, would that  include latest and current version...?

I don't know what version they are serving on their store, I use their Transfer Manager, which also states on the .zip file itself what version you are downloading. I reckon the store version would be the same?

Share this post


Link to post
4 minutes ago, Sethos1988 said:

I reckon the store version would be the same? 

 

Than, since I have no idea where to get one in between and unable to log in to their forums due to administrative nonsense by REX and ask the question, I should stay with old one forever....Interesting is that I can buy new product, but not get support on one I bought it🙂...lol, ok. Good to know

Thanks for your help Sethos

Share this post


Link to post

 

7 hours ago, cyyzrwy24 said:

Problem with rex is that I am unable to log in for months...! In spite, that I changed several times my password, I am able only to log in in their tweeter page?! Ricardo is aware of that and he he said he will look in to that and nothing happens. So not sure what's with them really. But I can't see important posts on their support forum and guess what, I have almost everything by them. Great customer service they have....

Who is Ricardo? No one works at REX with that name.

Anyways, I would love to assist, however, I need your forum name or email address associated with the account. You can PM me here with that information and I will make sure you are connected properly.

Share this post


Link to post

@timest

I think it was Frederico? 

I'm at work now, but when I get home (if no one has answered) I'll try to dig up the name.

 

Share this post


Link to post
21 minutes ago, SKEWR said:

think it was Frederico? 

You are correct, my bad....

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...