March 16, 20206 yr I have installed, uninstalled and reinstalled and get the same result. P3D crashes and will not start after this product is installed. AppCrash says it is Kernall dll issue. After uninstalling the product system restore fixes the issue of starting P3D but I am wondering if anyone else has had this issue. I am working to get Latin VFR forum password updated but they don't seem to respond. I have always found their products to be very good and have never had an issue like this with them. P3D4, Windows 7, NVIDIA driver 442.19. Ken Thompson i7-4790 @4 GHz 64 Bit Win 7 16G RAM GTX 1080Ti
March 16, 20206 yr 22 minutes ago, kenthom said: I have installed, uninstalled and reinstalled and get the same result. P3D crashes and will not start after this product is installed. AppCrash says it is Kernall dll issue. After uninstalling the product system restore fixes the issue of starting P3D but I am wondering if anyone else has had this issue. I am working to get Latin VFR forum password updated but they don't seem to respond. I have always found their products to be very good and have never had an issue like this with them. P3D4, Windows 7, NVIDIA driver 442.19. Some other people had to disable the FSSI AI Sloped Runway add-on to avoid those crashes. Try to see if that solves your issues. Cheers, Ed Cheers, Ed MSFS2020 Steam // Rig: Corsair Graphite 760T Full Tower - ASUS MBoard Maximus XII Hero Z490 - CPU Intel i9-10900K - 64GB RAM - MSI RTX2080 Super 8GB - [1xNVMe M.2 1TB + 1xNVMe M.2 2TB (Samsung)] + [1xSSD 1TB + 1xSSD 2TB (Crucial)] + [1xSSD 1TB (Samsung)] + 1 HDD Seagate 2TB + 1 HDD Seagate External 4TB - Monitor LG 29UC97C UWHD Curved - PSU Corsair RM1000x // Thrustmaster FCS & MS XBOX Controllers
March 16, 20206 yr 37 minutes ago, edpatino said: Some other people had to disable the FSSI AI Sloped Runway add-on to avoid those crashes. Try to see if that solves your issues. Cheers, Ed I had to do that. 1 hour ago, kenthom said: I have installed, uninstalled and reinstalled and get the same result. P3D crashes and will not start after this product is installed. AppCrash says it is Kernall dll issue. After uninstalling the product system restore fixes the issue of starting P3D but I am wondering if anyone else has had this issue. I am working to get Latin VFR forum password updated but they don't seem to respond. I have always found their products to be very good and have never had an issue like this with them. P3D4, Windows 7, NVIDIA driver 442.19. We have similar setups. What version of P3DV4 are you using? There are other reporting the crash, but no one is listing their specs in the forum. Ricardo is looking into it. MSFS Premium Deluxe Edition; Windows 11 Pro, I9-9900k; Asus Maximus XI Hero; Asus TUF RTX3080TI; 32GB G.Skill Ripjaw DDR4 3600; 2X Samsung 1TB 970EVO; NZXT Kraken X63; Seasonic Prime PX-1000, LG 48" C1 Series OLED, Honeycomb Yoke & TQ, CH Rudder Pedals, Logitech G13 Gamepad
March 16, 20206 yr I can confirm I have no issues with p3d or landing on the sloped runway. Works fine just like any other scenery for me. 5800X3D, 4090FE, 64GB DDR4 3600C16, Gigabyte X570S MB, EVO 970 M.2's, Alienware 3821DW and 2 22" monitors, Corsair RM1000x PSU, 360MM MSI MEG, MFG Crosswind, T16000M Stick, Boeing TCA Yoke/Throttle, Skalarki MCDU and FCU, Logitech Radio Panel/Switch Panel, Spad.Next
March 16, 20206 yr Author 36 minutes ago, duckbilled said: I had to do that. We have similar setups. What version of P3DV4 are you using? There are other reporting the crash, but no one is listing their specs in the forum. Ricardo is looking into it. 4.4 How would I uninstall it? I landed on the sloped runway at KSUN last week with no problem. Edited March 16, 20206 yr by kenthom Ken Thompson i7-4790 @4 GHz 64 Bit Win 7 16G RAM GTX 1080Ti
March 16, 20206 yr At orbx KSUN? How do you turn that on? 5800X3D, 4090FE, 64GB DDR4 3600C16, Gigabyte X570S MB, EVO 970 M.2's, Alienware 3821DW and 2 22" monitors, Corsair RM1000x PSU, 360MM MSI MEG, MFG Crosswind, T16000M Stick, Boeing TCA Yoke/Throttle, Skalarki MCDU and FCU, Logitech Radio Panel/Switch Panel, Spad.Next
March 16, 20206 yr Author 10 minutes ago, micstatic said: At orbx KSUN? How do you turn that on? I didn't turn anything on. I assumed the plane went with the elevation of the runway. I stand corrected if I am wrong. Ken Thompson i7-4790 @4 GHz 64 Bit Win 7 16G RAM GTX 1080Ti
March 16, 20206 yr Player aircraft can generally land on a sloped runway without issue. The issue is AI traffic couldn’t until now. So KSUN should work without issue for player aircraft. Dave Current System (Running at 4k): ASUS ROG STRIX X670E-F, Ryzen 7800X3D, RTX 5090, 55" Samsung Q80T, 64GB DDR5 6000 RAM, EVGA CLC 280mm AIO Cooler, Brunner CLS-E NG Yoke, Thrustmaster Warthog HOTAS & Stick, Thrustmaster TCA Quadrant & Add-on, VirtualFly Ruddo+, TQ6+ and Yoko+, GoFlight MCP-PRO and EFIS, Skalarki FCU and MCDU
March 16, 20206 yr Author Removing the sloped RW as described worked. The airport does not have runway lights per the time preview. Is that a known issue? 20 minutes ago, regis9 said: Player aircraft can generally land on a sloped runway without issue. The issue is AI traffic couldn’t until now. So KSUN should work without issue for player aircraft. I understand. Thanks. Ken Thompson i7-4790 @4 GHz 64 Bit Win 7 16G RAM GTX 1080Ti
March 16, 20206 yr 1 hour ago, kenthom said: 4.4 How would I uninstall it? I landed on the sloped runway at KSUN last week with no problem. Are you running Prepar3D v4.4 you say? Rhett 7800X3D ♣ 96 GB G.Skill Flare ♣ Gigabyte 4090 ♣ Crucial P5 Plus 2TB
March 17, 20206 yr Author 44 minutes ago, Mace said: Are you running Prepar3D v4.4 you say? Yes Ken Thompson i7-4790 @4 GHz 64 Bit Win 7 16G RAM GTX 1080Ti
March 17, 20206 yr 3 hours ago, kenthom said: 4.4 How would I uninstall it? I landed on the sloped runway at KSUN last week with no problem. Same here. 4.4 MSFS Premium Deluxe Edition; Windows 11 Pro, I9-9900k; Asus Maximus XI Hero; Asus TUF RTX3080TI; 32GB G.Skill Ripjaw DDR4 3600; 2X Samsung 1TB 970EVO; NZXT Kraken X63; Seasonic Prime PX-1000, LG 48" C1 Series OLED, Honeycomb Yoke & TQ, CH Rudder Pedals, Logitech G13 Gamepad
March 31, 20206 yr This worked for me: I'm using P3d4.5 https://www.latinvfr.org/forum/viewtopic.php?f=8&t=378
April 4, 20206 yr Commercial Member Hi, see new post with an update: http://www.latinvfr.org/forum/viewtopic.php?f=5&p=2239&sid=82d7740e2bbbeaa9e899be7071749855#p2239 Federico Federico Sucari
Archived
This topic is now archived and is closed to further replies.