Skip to content
View in the app

A better way to browse. Learn more.

The AVSIM Community

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

What's your GPU/CPU load?

Featured Replies

Just saw that since the hotfix my GPU constantly runs between 95 and 100 percent load while the CPU chills at 25.

Sim runs smooth @4k ultra but I'm afraid running it at constantly high loads will harm the GPU in the long term.

GPU: RTX3080

CPU: i9-9900k

Intel i9-13900K | Gigabyte Z790 Aorus Master | RTX4090 | 2x16GB Corsair Vengeance DDR5-6000 | Be quiet! Pure Loop 2 FX AiO | Win 11

12 minutes ago, ThomseN_inc said:

Just saw that since the hotfix my GPU constantly runs between 95 and 100 percent load while the CPU chills at 25.

Sim runs smooth @4k ultra but I'm afraid running it at constantly high loads will harm the GPU in the long term.

GPU: RTX3080

CPU: i9-9900k

Thats how its always been for me since launch. GPU is always running at full while the cpu chill and doesnt go about 55%

i7 -10700k @ 5.1ghz 

RTX 2080S OC

  • Author
Just now, devgrp said:

Thats how its always been for me since launch. GPU is always running at full while the cpu chill and doesnt go about 55%

i7 -10700k @ 5.1ghz 

RTX 2080S OC

Ok. My GPU load was lower pre Hotfix. I can easily tell by the noiselevel. And GPU-Z ofcourse.

Intel i9-13900K | Gigabyte Z790 Aorus Master | RTX4090 | 2x16GB Corsair Vengeance DDR5-6000 | Be quiet! Pure Loop 2 FX AiO | Win 11

I dont see that at all.

If you run unlimited FPS your always cpu limited.

I limited my FPS to 31 RTSS and up graphics and render scale, so cpu core thats used the most runs at 80% gpu 70%-80%. Unlimited at KIAD I get 54 FPS but I have to fix fps below 35 to drop main cpu from being caped out(100%)

I have no idea how you get your main cpu @ 25 and gpu maxed out.

Today in the CRJ I sat at a gate KIAD and had dev mode open. nothing I did got be away from 26fps, main core cpu limited even when I put renderscale to 200 I was still cpu limited and I still had 26fps, totaly given up on the CRJ after this morning. Its just a cpu main core thrasher.

With the CJ4 wt same place I can blance cpu and GPU with these settings.

The cpu here was low becasue I was in setting. You need to target cpu to around 80% and balance your GPU, its impossable for me to have a cpu at 20 and GPU maxed out, I tried and got FPS locked at 10 to get cpu down to 20%.

Settings.png

David Murden  MSFS   Fenix A320  PMDG 737 • MG Honda Jet • 414 / TDS 750Xi •  FS-ATC Chatter • FlyingIron Spitfire & ME109G • MG Honda Jet 

 Fenix A320 Walkthrough PDF   Flightsim.to •

DCS  A10c II  F-16c  F/A-18c • F-14 • (Others in hanger) • Supercarrier  Terrains = • Nevada NTTR  Persian Gulf  Syria • Marianas • 

• [email protected] All Cores HT ON   32GB DDR4  3200MHz RTX 3080  • TM Warthog HOTAS • TM TPR • Corsair Virtuoso XT with Dolby Atmos®  Samsung G7 32" 1440p 240Hz • TrackIR 5 & ProClip

35 minutes ago, ThomseN_inc said:

Just saw that since the hotfix my GPU constantly runs between 95 and 100 percent load while the CPU chills at 25.

Sim runs smooth @4k ultra but I'm afraid running it at constantly high loads will harm the GPU in the long term.

GPU: RTX3080

CPU: i9-9900k

You are likely looking at the total CPU load. One core could be very high and the others much lower given a total load that is low like 25%. Whatever core your MSFS main thread is running on is likely much higher than that. 

 

If you are running 4K ultra then change nothing and enjoy!

 

Your GPU will be fine. You paid for its power why not utilize it? As long as it isn't running too hot, like 90C or more. 

  • Author
9 minutes ago, Av8ing1 said:

You are likely looking at the total CPU load. One core could be very high and the others much lower given a total load that is low like 25%. Whatever core your MSFS main thread is running on is likely much higher than that. 

 

If you are running 4K ultra then change nothing and enjoy!

 

Your GPU will be fine. You paid for its power why not utilize it? As long as it isn't running too hot, like 90C or more. 

Might be and i'm ok with the CPU load. I was just wondering and a bit concerned because the GPU load was much higher than two days before.

Temperatures are around 75-80 degrees.

Intel i9-13900K | Gigabyte Z790 Aorus Master | RTX4090 | 2x16GB Corsair Vengeance DDR5-6000 | Be quiet! Pure Loop 2 FX AiO | Win 11

I would say that the high GPU load is a good thing, its being well utilized. Only concern would be temps and it sounds like you are okay on that. 

1 hour ago, ThomseN_inc said:

Just saw that since the hotfix my GPU constantly runs between 95 and 100 percent load while the CPU chills at 25.

Sim runs smooth @4k ultra but I'm afraid running it at constantly high loads will harm the GPU in the long term.

GPU: RTX3080

CPU: i9-9900k

What is the point of buying a high-end GPU and run it as a low-end card?

Your GPU is made to operate at 100% in games, which is the power limit set by the manufacturer for your card to run safe, but that limit can be exceeded by the user, it is called overclocking.

Edited by Ixoye

System: I ASRock X670E | AMD 7800X3D | 64Gb DDR5 6000 | RTX 4090 | 2TB NVMe | Seasonic Vertex 1000W I LG Ultra Gear 34 UW I

It's hard to say, alot of it depends on what I limit the frames at that determines my GPU load and temp. Since launch it's been GPU heavy. I use to worry about my 1070ti constantly hitting 70c on high settings. My 2080S runs about 65-70c (mostly Ultra) If limit frames to 45-50. 

ASUS Prime Z490-A / i7-10700K / RTX 4080 / G.SKILL Ripjaws 32GB / Lian-Li PC-O11 Dynamic case 

  • Author
15 minutes ago, Ixoye said:

What is the point of buying a high-end GPU and run it as a low-end card?

Your GPU is made to operate at 100% in games, which is the power limit set by the manufacturer for your card to run safe, but that limit can be exceeded by the user, it is called overclocking.

I never said to do that. I was just wondering because i never had my GPU running at that load even on AAA Games like Red Dead 2 or Cyberpunk.

Intel i9-13900K | Gigabyte Z790 Aorus Master | RTX4090 | 2x16GB Corsair Vengeance DDR5-6000 | Be quiet! Pure Loop 2 FX AiO | Win 11

1 minute ago, ThomseN_inc said:

I never said to do that. I was just wondering because i never had my GPU running at that load even on AAA Games like Red Dead 2 or Cyberpunk.

You should always load as much graphical settings as your GPU can handle, in that way you relieve work for your CPU that will come in better use in more complex areas.

System: I ASRock X670E | AMD 7800X3D | 64Gb DDR5 6000 | RTX 4090 | 2TB NVMe | Seasonic Vertex 1000W I LG Ultra Gear 34 UW I

C152 @1440P Ultra with 120% render scaling.

GPU 90-99%

CPU 22% MAX

FPS 55-65

what did they change, they must have done some additional work as my SIM has NEVER run so good, even before the UK update.

New PC Ryzen 9850X3D - 32gb ddr5 6000Mhz - MSI MAG B850 Tomahawk wifi - Gigabyte wind force gaming OC 5090 - 2TB Sabrent NVMe. Old PC - Ryzen 5900x - 32gb 3600Mhz RAM - Asus Strix X570-F Motherboard - ASUS TUF OC RTX 3090 - 1TB Sabrent NVMe. AOC AGON 32" 144Hz - Honeycomb Yoke - Thrustmaster HOTAS Warthog. T Flight Rudder Pedals - Trackir.

My GPU load is very high, pretty much maxed out (8Gb RX480), but it's stable for all that. I guess the sim is just using what it can because I have all the settings on very high in MSFS with a lot of them on Ultra. CPU not much doing. MSFS never CTDs, I'm one of the lucky ones who never has a problem with it.

Alan Bradbury

Check out my youtube flight sim videos: Here

  • Author
4 minutes ago, Chock said:

My GPU load is very high, pretty much maxed out (8Gb RX480), but it's stable for all that. I guess the sim is just using what it can because I have all the settings on very high in MSFS with a lot of them on Ultra. CPU not much doing. MSFS never CTDs, I'm one of the lucky ones who never has a problem with it.

I agree that its really smooth at the moment. So as long as my GPU doesn't go up in flames i'm all good.

Intel i9-13900K | Gigabyte Z790 Aorus Master | RTX4090 | 2x16GB Corsair Vengeance DDR5-6000 | Be quiet! Pure Loop 2 FX AiO | Win 11

You can always use render scaling to reduce the load a bit, with negligible results on visual quality.

We are all connected..... To each other, biologically...... To the Earth, chemically...... To the rest of the Universe atomically.
 
Devons rig
Intel Core i5 13600K @ 5.1GHz / G.SKILL Trident Z5 RGB Series Ram 64GB / GIGABYTE GeForce RTX 4070 Ti GAMING OC 12G Graphics Card / Sound Blaster Z / Meta Quest 2 VR Headset / Klipsch® Promedia 2.1 Computer Speakers / ASUS ROG SWIFT PG279Q ‑ 27" IPS LED Monitor ‑ QHD / 1x Samsung SSD 850 EVO 500GB / 2x Samsung SSD 860 EVO 1TB /  1x Samsung - 970 EVO Plus 2TB NVMe /  1x Samsung 980 NVMe 1TB / 2 other regular hd's with up to 10 terabyte capacity / Windows 11 Pro 64-bit / Gigabyte Z790 Aorus Elite AX Motherboard LGA 1700 DDR5

Archived

This topic is now archived and is closed to further replies.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.