June 2, 20215 yr Hello, lately (maybe since the last patch?) I've found that the incoming ATC transmissions (ie everything other than what my pilot says) are very faint. At first I thought that it was the recurring issue where ATC doesn't work at all but it's only incoming transmissions and they're definitely playing, just very faint. Faint enough that I can't really here them in a normal flight situation. Same issue with Azure and offline voices. Same issue using my headphones and speakers. Sound mode is default, all volume sliders at 100% Any ideas? Dave Current System (Running at 4k): ASUS ROG STRIX X670E-F, Ryzen 7800X3D, RTX 5090, 55" Samsung Q80T, 64GB DDR5 6000 RAM, EVGA CLC 280mm AIO Cooler, Brunner CLS-E NG Yoke, Thrustmaster Warthog HOTAS & Stick, Thrustmaster TCA Quadrant & Add-on, VirtualFly Ruddo+, TQ6+ and Yoko+, GoFlight MCP-PRO and EFIS, Skalarki FCU and MCDU
June 2, 20215 yr I agree, I also have trouble hearing the ATC. There is nothing wrong with my sound. All the other aircraft sounds are load enough. Voices not so much. i7 8700K CPU @ 4.8 GHz, 32 GB DDR4 3000 memory, Gigabyte Aorus Z370 MB, EVGA RTX 2060 Super XC Ultra GPU 8GB GDDR6 Memory, MasterAir MA610P CPU cooler, 1T PCIe NVMe SSD, 500GB SSD, 2T HDD, 3 Asus 24" monitors, Saitek X56 Rhino H.O.T.A.S., Altec Surround Sound System.
June 2, 20215 yr Just a thought. Did you try increase com volume ? Life time flight sim enthusiast, current airplane owner 172P (past C182F). FAA CP/IR ASEL/AMEL, FI ASELMy System: AMD Ryzen 9 9950X3D , MSI X870 GAMING PLUS, 64G RAM, ASUS RTX5090, 4T SSDPut my hands on (pic/dual/given)7GCAA, 8KCAB, BE24, BE76, BE35-C33, BE35, C150, C152, C172B/N/P/R/SP, 182F, M20E,M20C, M20J, AT6(SNJ4), PA28-140,PA28-151, PA28-161,PA28-181,PA28RT-201,PA28R-180/201T, PA24-250, PA32-300R, PA44, AC114, YAK-18T, YAK-52, SR22
June 2, 20215 yr Go to sounds, set them all to 70% and leave ATC at 100%. David Murden. MSFS • Fenix A320 • PMDG 737 • MG Honda Jet • 414 / TDS 750Xi • FS-ATC Chatter • FlyingIron Spitfire & ME109G • MG Honda Jet • • Fenix A320 Walkthrough PDF • Flightsim.to • DCS • A10c II • F-16c • F/A-18c • F-14 • (Others in hanger) • Supercarrier • Terrains = • Nevada NTTR • Persian Gulf • Syria • Marianas • • [email protected] All Cores HT ON • 32GB DDR4 3200MHz • RTX 3080 • TM Warthog HOTAS • TM TPR • Corsair Virtuoso XT with Dolby Atmos® • Samsung G7 32" 1440p 240Hz • TrackIR 5 & ProClip •
June 2, 20215 yr Depends where you are, but ATC transmissions contain software to simulate degrading and interference caused by terrain and atmospherics. I notice this a lot when I go flying in mountainous areas. I agree with Nyxx about reducing all sounds to (I use 80% myself) and increasing the ones you want higher (such as radio transmissions) to 100%) or just reduce the engine sounds a little (there are plenty of silders to play with and the settings you choose may well be different depending on which aircraft you fly most of the time or whether you use headphones). Ryzen 5800X3D, Nvidia RTX5080 - 32 Gig DDR4 RAM, 1TB & 2 TB NVME drives - Windows 11 64 bit MSFS 2024 Premium Deluxe Edition Resolution 2560 x 1440 (32 inch curved monitor)
June 2, 20215 yr Author 8 hours ago, sd_flyer said: Just a thought. Did you try increase com volume ? I will try that...this all happened in an aircraft using the GTN530 mod, perhaps that’s modelled in the mod? I’ll check it out. 6 hours ago, Nyxx said: Go to sounds, set them all to 70% and leave ATC at 100%. Thanks, the issue though is that mine are loud and clear and the rest are extremely quiet...I think ATC would impact both my transmissions and transmissions that I receive? 5 hours ago, cianpars said: Depends where you are, but ATC transmissions contain software to simulate degrading and interference caused by terrain and atmospherics. I notice this a lot when I go flying in mountainous areas. Thanks, I’ve heard that effect and it’s quite a nice touch but in this case I was at KFLL. Dave Current System (Running at 4k): ASUS ROG STRIX X670E-F, Ryzen 7800X3D, RTX 5090, 55" Samsung Q80T, 64GB DDR5 6000 RAM, EVGA CLC 280mm AIO Cooler, Brunner CLS-E NG Yoke, Thrustmaster Warthog HOTAS & Stick, Thrustmaster TCA Quadrant & Add-on, VirtualFly Ruddo+, TQ6+ and Yoko+, GoFlight MCP-PRO and EFIS, Skalarki FCU and MCDU
June 2, 20215 yr This may help you...with my Logitech 5.1 surround, there are different modes for the speakers, I have to make sure the front center speaker is on, seems that that's where the ATC is coming from. If not, I get the same "muted" ATC issue!! Mike CyberPowerPC - Gamer Supreme Gaming Desktop - AMD Ryzen 9 9950X3D - 64GB Memory - AMD Radeon RX 9070 XT 16GB - 4TB PCIe 4.0 SSD
June 2, 20215 yr 1 hour ago, regis9 said: Thanks, the issue though is that mine are loud and clear and the rest are extremely quiet...I think ATC would impact both my transmissions and transmissions that I receive? That definitely sounds like the volume on whatever com unit your using isn't turned up properly. I've encountered this several times.. i could hear my comms but couldn't hear anything in response only to find the com volume turned right down. Seems a bit random whether the comms volume is turned up or not on aircraft load up. First thing i check now when the systems are fired up.
June 3, 20215 yr Author Turns out it was the volume setting on the GNS530. I learned something new! Thanks very much. Dave Current System (Running at 4k): ASUS ROG STRIX X670E-F, Ryzen 7800X3D, RTX 5090, 55" Samsung Q80T, 64GB DDR5 6000 RAM, EVGA CLC 280mm AIO Cooler, Brunner CLS-E NG Yoke, Thrustmaster Warthog HOTAS & Stick, Thrustmaster TCA Quadrant & Add-on, VirtualFly Ruddo+, TQ6+ and Yoko+, GoFlight MCP-PRO and EFIS, Skalarki FCU and MCDU
Archived
This topic is now archived and is closed to further replies.