November 14, 20214 yr Good day, Some suggestions that might make this simulation less time-consuming, less tweaking, and much easy to operate during start-up for a better experience. I would like after we create and save a new setup tailored for a particular aircraft for keyboard, mouse, rudder, yoke, throttle in the control section to be memorized and automatically loaded for that particular aircraft. Also after we select any aircraft there is a menu that allows us to customize a/c with respect to the flight model sections as to elevator authority adjustment, rudder authority adjustment, and aileron authority adjustment. Unfortunately, all these values are not saved for later use, and every time when sim is started all the adjustments are lost and we have to go back and readjust. Something else I noted was a big discrepancy of about 60 KTS on Bonanza G36 related to IAS on PFD and the stby airspeed gauge. 747 Captain for the last 39 years, and still learning.
November 14, 20214 yr 40 minutes ago, killthespam said: Something else I noted was a big discrepancy of about 60 KTS on Bonanza G36 related to IAS on PFD and the stby airspeed gauge. The fix for that has been posted... and the latest Rob Young G36 V4 also has this fixed. Edited November 14, 20214 yr by Bert Pieke Bert
November 15, 20214 yr Do yourself a favour Vlad and get yourself Axis&Ohs. A new equivalent to LINDA in P3d/FSX. The real cool thing about it is you can change assignments and axis calibration in real time! This is wonderful. It remembers the individual aircraft's profiles and does a good job of it. I have only just started using it after a while getting my head around things, I have to say it has transformed MSFS for me. HowardMSI Mag B650 Tomahawk MB, Ryzen7-7800X3D CPU@5ghz, Arctic AIO II 360 cooler, Nvidia RTX4090 GPU, 32gb DDR5@6000Mhz, SSD/2Tb+SSD/500Gb+OS, Corsair 1000W PSU, LG Ultragear 48"4K, MFG Crosswinds, TQ6 Throttle, Fulcrum One YokeMy FlightSim YouTube Channel: https://www.youtube.com/@skyhigh776
November 15, 20214 yr 1 hour ago, Rockliffe said: Do yourself a favour Vlad and get yourself Axis&Ohs. A new equivalent to LINDA in P3d/FSX. The real cool thing about it is you can change assignments and axis calibration in real time! This is wonderful. It remembers the individual aircraft's profiles and does a good job of it. I have only just started using it after a while getting my head around things, I have to say it has transformed MSFS for me. Great hint Howard ! Big Thank You ! Wonder if it works even with my ELITE Hw ( ? ) Flying gliders since 1980 Flightsimming since 1992 AMD Ryzen 5600x, 32GB RAM, GPU Nvidia RTX 3060 Ti 8 GB, 1 TB and 500 GB nvme2 SSD drives, HP 27" 60Hz LED monitor @ 1920x1080, T16000, Hotas from old X52 Pro, Saitek Combat Rudder Pro (2010 model)
November 15, 20214 yr 2 hours ago, jcomm said: Wonder if it works even with my ELITE Hw ( ? ) There is a free trial version! Bert
November 15, 20214 yr Yep, going to give it a try 🙂 Flying gliders since 1980 Flightsimming since 1992 AMD Ryzen 5600x, 32GB RAM, GPU Nvidia RTX 3060 Ti 8 GB, 1 TB and 500 GB nvme2 SSD drives, HP 27" 60Hz LED monitor @ 1920x1080, T16000, Hotas from old X52 Pro, Saitek Combat Rudder Pro (2010 model)
November 15, 20214 yr Author 5 hours ago, Rockliffe said: Do yourself a favour Vlad and get yourself Axis&Ohs. A new equivalent to LINDA in P3d/FSX. The real cool thing about it is you can change assignments and axis calibration in real time! This is wonderful. It remembers the individual aircraft's profiles and does a good job of it. I have only just started using it after a while getting my head around things, I have to say it has transformed MSFS for me. Thank you! I will look into it and if I have any questions I hope you don't mind helping. Greatly appreciated. 747 Captain for the last 39 years, and still learning.
November 16, 20214 yr Author Thank you guys! What a difference. Still learning about the settings, anyhow, so far as little as I'm exposed to this software I think is better than FSUPIC. I might be wrong, but at the moment I see many positive options that I missed in reference to the other one. 747 Captain for the last 39 years, and still learning.
November 16, 20214 yr 4 hours ago, killthespam said: I think is better than FSUPIC. It gives you the "settings by airplane" that you were looking for.. 😉 Bert
November 16, 20214 yr Author Yes Bert, that was also available with FSUPIC. But, there are a few more options available for fine-tuning with Axis&Ohs. I was using FSUPIC from day one, but this one (IMHO) suits me better so far. As I said, I'm totally green with this software and I find it very intuitive. Time will tell. 747 Captain for the last 39 years, and still learning.
November 16, 20214 yr Will Axis&Ohs help my Saitek (now Logitech) panels work better? Or do I need Spad.next for that? I am getting really frustrated with the buggy Logitech panel drivers in MSFS. Rob (but call me Bob or Rob, I don't mind). I like to trick airline passengers into thinking I have my own swimming pool in my back yard by painting a large blue rectangle on my patio. Intel 14900K in a Z790 motherboard with water cooling, RTX 4080, 32 GB 6000 CL30 DDR5 RAM, W11 and MSFS on Samsung 980 Pro NVME SSD's. Core Isolation Off, Game Mode Off.
November 16, 20214 yr Author 37 minutes ago, bobcat999 said: Will Axis&Ohs help my Saitek (now Logitech) panels work better? Or do I need Spad.next for that? I am getting really frustrated with the buggy Logitech panel drivers in MSFS. I'm not familiar with Saitek, but I see many options related to that in the Hardware menu, also there are so many options to set with key bindings and assignments. Regarding Saitek see this picture, please. 747 Captain for the last 39 years, and still learning.
November 16, 20214 yr 3 minutes ago, killthespam said: I'm not familiar with Saitek, but I see many options related to that in the Hardware menu, also there are so many options to set with key bindings and assignments. Regarding Saitek see this picture, please. Excellent! Thanks Vlad. Lots of mentions of the Saitek panels in the menu there. I will look into this in more detail. Rob (but call me Bob or Rob, I don't mind). I like to trick airline passengers into thinking I have my own swimming pool in my back yard by painting a large blue rectangle on my patio. Intel 14900K in a Z790 motherboard with water cooling, RTX 4080, 32 GB 6000 CL30 DDR5 RAM, W11 and MSFS on Samsung 980 Pro NVME SSD's. Core Isolation Off, Game Mode Off.
November 16, 20214 yr 48 minutes ago, killthespam said: that was also available with FSUPIC I do use FSUIPC and have not seen this option... where is it hidden? Bert
Archived
This topic is now archived and is closed to further replies.