January 11, 20224 yr It took me a lot of testing find a good settings for my system. My 6900XT had some problems and no more stock was available, so I was completly... dead. Got a 6700xt but my system and monitor was built for the 6900xt in mind, with a 4k monitor still 60hz. So, high settings, nothing on ultra, 80% scale resolution from 4k, and vsync 30 FPS gives me an amazing experience. I really miss the 200 lods, 100 looks a bit bland on distance, but for me it really worth the effort. One setting that got me headache was the panels refresh rate, it was 8-10 FPS difference from high to low, dont know if this setting is CPU or GPU bound, so I keep it on LOW, as it gives me stutters with vsync enabled! Edited January 11, 20224 yr by PaulM 7800X3D / 7900XTX / ROG STRIX B650-A / Corsair Vengeance 32GB 6000mhz, etc etc.
January 11, 20224 yr I have a curved freesync Monitor. The gsync frequency range is 48-165 So whats the best setting to have 30 fps. Right now i have vsync in MSFS set to 30. And also limited the framerate in NCP to 30
January 11, 20224 yr I vary settings depending on my flight parameters. C152 out in the sticks Id probably run v-sync 60 and let my system run free of any constraints 🙂 anything complex over London - v-sync 20 to get a more stable frame rate - but more importantly better frame times and therefore prevent stutters as mush as possible. My Rig is also in my Conservatory, so in Summer it can get hot in there - I'd run v-sync 20 for sure then regardless of the flight. New PC Ryzen 9850X3D - 32gb ddr5 6000Mhz - MSI MAG B850 Tomahawk wifi - Gigabyte wind force gaming OC 5090 - 2TB Sabrent NVMe. Old PC - Ryzen 5900x - 32gb 3600Mhz RAM - Asus Strix X570-F Motherboard - ASUS TUF OC RTX 3090 - 1TB Sabrent NVMe. AOC AGON 32" 144Hz - Honeycomb Yoke - Thrustmaster HOTAS Warthog. T Flight Rudder Pedals - Trackir.
January 11, 20224 yr Got myself a LG C1 48 inch for christmas. No adjustments made in NV control panel, just in-sim "V-Sync" set to "On" and "Frame Rate Limit" set to "20". (Screen runs at 120Hz) Everything on Ultra gives me smooth 40fps 95% of the time (but graphic card mostly over 90% utlilization). Nvidia 4090 | AMD 9950X | 96GB DDR5 6000 CL30 | LG C1 48" | Pimax Crystal Light TCA Boeing Yoke | Honeycomb Bravo | TPR Rudders | Stream Deck XL | Streamdeck+ | Tobii 5 | Knobster
January 12, 20224 yr I run at 30 frame cap, VSYNC on in NCP, frames capped in NCP also at 60. My ryzen 5 3600 runs without boost so capped at 3.6 via processor 99% 'hack'. RTX 2070 under volt at 800v max and capped at 1740mhz core clock. 1080p and this means i can run pretty much all ULTRA (apart from the ones where its proven there is NO difference at all from medium to ultra) My biggest change is that i no longer ascribe to the Nvidia "max performance" mantra. I run it at Optimum so for example i can be flying over rural areas and my core clock is using 1300mhz and voltage is 7.4v Go into a city and core clock ups to 1740mhz... This means i get smooth 30frames at all times bar the odd drop but rarely. But importantly to me, temps on GPU are 51-58c and CPU 50-55c. Very under stressed but still looks amazing. Ryzen 5 3600 / RTX 2070 8GB / 2x8 RAM/
Archived
This topic is now archived and is closed to further replies.