May 19, 20224 yr I'm not referring to the Ctrl-Alt-Number, but trying to activate Reset Cockpit View. I do this w/ the A2 button on my yoke. But to save this view I've been using Ctrl-F9. The problem is when I do this it does not save it in the exact position I was in--it's offset slightly both vertically and horizontally. It does capture that offset position and the A2 will bring it up. Thanks Noel System: 9900X3D Noctua NH-D15 G2, MSI Pro 650-P WiFi, G.SKILL 64GB (2 x 32GB) 288-Pin PC RAM DDR5 6000, WD NVMe 2Tb x 1, Sabrent NVMe 2Tb x 1, RTX 4090 FE, Corsair RM1000W PSU, Win11 Home, LG Ultra Curved Gsync Ultimate 3440x1440, Phanteks Enthoo Pro Case, TCA Boeing Edition Yoke & TQ, Cessna Trim Wheel, RTSS Framerate Limiter w/ Front Edge Sync. Aircraft used in MSFS 2024: Fenix A320, Aerosoft CRJ, FBW, WT 787X, I-Fly 737 MAX 8, Citation Longitude.
May 19, 20224 yr Try CTRL+ALT+V ASUS ROG Maximus Hero XII ▪︎ Intel i9-10900K ▪︎ NVIDIA RTX 3090 FE ▪︎ 64GB Corsair Vengeance RGB Pro ▪︎ Windows 10 Pro (21H1) ▪︎ Samsung 970 EVO Pro 1TB NVME SSD (OS Drive) ▪︎ Samsung 860 EVO 2TB SATA SSD ▪︎ Seagate 4TB SATA HDD ▪︎ Corsair RMx 850W PSU
May 19, 20224 yr 13 minutes ago, captain420 said: Try CTRL+ALT+V Great idea, I just thought I would try that as am in cruise, it shut down my 737 engines. Thanks! David Murden. MSFS • Fenix A320 • PMDG 737 • MG Honda Jet • 414 / TDS 750Xi • FS-ATC Chatter • FlyingIron Spitfire & ME109G • MG Honda Jet • • Fenix A320 Walkthrough PDF • Flightsim.to • DCS • A10c II • F-16c • F/A-18c • F-14 • (Others in hanger) • Supercarrier • Terrains = • Nevada NTTR • Persian Gulf • Syria • Marianas • • [email protected] All Cores HT ON • 32GB DDR4 3200MHz • RTX 3080 • TM Warthog HOTAS • TM TPR • Corsair Virtuoso XT with Dolby Atmos® • Samsung G7 32" 1440p 240Hz • TrackIR 5 & ProClip •
May 19, 20224 yr 34 minutes ago, Nyxx said: Great idea, I just thought I would try that as am in cruise, it shut down my 737 engines. Thanks! Really? So sorry I didn't mean that. I really thought that was to save the default pilot view cam position? ASUS ROG Maximus Hero XII ▪︎ Intel i9-10900K ▪︎ NVIDIA RTX 3090 FE ▪︎ 64GB Corsair Vengeance RGB Pro ▪︎ Windows 10 Pro (21H1) ▪︎ Samsung 970 EVO Pro 1TB NVME SSD (OS Drive) ▪︎ Samsung 860 EVO 2TB SATA SSD ▪︎ Seagate 4TB SATA HDD ▪︎ Corsair RMx 850W PSU
May 19, 20224 yr Author I tried that with Left side Ctrl-Alt-V but no joy--thanks for the try though Noel System: 9900X3D Noctua NH-D15 G2, MSI Pro 650-P WiFi, G.SKILL 64GB (2 x 32GB) 288-Pin PC RAM DDR5 6000, WD NVMe 2Tb x 1, Sabrent NVMe 2Tb x 1, RTX 4090 FE, Corsair RM1000W PSU, Win11 Home, LG Ultra Curved Gsync Ultimate 3440x1440, Phanteks Enthoo Pro Case, TCA Boeing Edition Yoke & TQ, Cessna Trim Wheel, RTSS Framerate Limiter w/ Front Edge Sync. Aircraft used in MSFS 2024: Fenix A320, Aerosoft CRJ, FBW, WT 787X, I-Fly 737 MAX 8, Citation Longitude.
May 19, 20224 yr 14 minutes ago, captain420 said: Really? So sorry I didn't mean that. I really thought that was to save the default pilot view cam position? Its OK, I know how to do an in flight engine start, so it was sorted out fast 🙂, it was fun, both engines out 🙂 But best not done in the air 😉 David Murden. MSFS • Fenix A320 • PMDG 737 • MG Honda Jet • 414 / TDS 750Xi • FS-ATC Chatter • FlyingIron Spitfire & ME109G • MG Honda Jet • • Fenix A320 Walkthrough PDF • Flightsim.to • DCS • A10c II • F-16c • F/A-18c • F-14 • (Others in hanger) • Supercarrier • Terrains = • Nevada NTTR • Persian Gulf • Syria • Marianas • • [email protected] All Cores HT ON • 32GB DDR4 3200MHz • RTX 3080 • TM Warthog HOTAS • TM TPR • Corsair Virtuoso XT with Dolby Atmos® • Samsung G7 32" 1440p 240Hz • TrackIR 5 & ProClip •
May 19, 20224 yr Author 4 minutes ago, TASCHMANN said: Set the view you want, then press Ctl-f10. I've tried this and it does not get brought back up when executing "Reset Cockpit View". What brings up what is save when you use Ctrl-F10 Noel System: 9900X3D Noctua NH-D15 G2, MSI Pro 650-P WiFi, G.SKILL 64GB (2 x 32GB) 288-Pin PC RAM DDR5 6000, WD NVMe 2Tb x 1, Sabrent NVMe 2Tb x 1, RTX 4090 FE, Corsair RM1000W PSU, Win11 Home, LG Ultra Curved Gsync Ultimate 3440x1440, Phanteks Enthoo Pro Case, TCA Boeing Edition Yoke & TQ, Cessna Trim Wheel, RTSS Framerate Limiter w/ Front Edge Sync. Aircraft used in MSFS 2024: Fenix A320, Aerosoft CRJ, FBW, WT 787X, I-Fly 737 MAX 8, Citation Longitude.
May 19, 20224 yr If you are anywhere in the cockpit view, either "Ctl-space" or the "F" key will bring you back to the view you set with ctl-f10. Both do the same thing. It's called "Reset Cockpit View" on the default Keyboard settings list. Just to be clear, this will not work if you are in external view, nor will it work if you have changed the default keyboard commands. But it works well if you are in the overhead panel, for example..or anywhere inside the aircraft. Edited May 19, 20224 yr by TASCHMANN
May 19, 20224 yr No problem with "F" it is one of the keys that work. The other is "Ctl-space" they both do the same thing. It's your choice. If you have any problem just check your keyboard assignments in the Controls Options to make sure those keys are correctly mapped. BTW I'm assuming your not using VR. With VR the process is a little different. Edited May 19, 20224 yr by TASCHMANN
May 19, 20224 yr Someone should write this up and post it to the MSFS 2020 Tips and Tricks area. Frank Patton Corsair 5000D Airflow Case; MSI B650 Tomahawk MOB; Ryzen 7 7800 X3D CPU; ASUS RTX 4080 Super; NZXT 360mm liquid cooler; Corsair Vengeance 64GB DDR5 4800 MHz RAM; RMX850X Gold PSU;; ASUS VG289 4K 27" Display; Honeycomb Alpha & Bravo, Crosswind 3's w/dampener. Former USAF meteorologist & ground weather school instructor. AOPA Member #07379126 "I will never put my name on a product that does not have in it the best that is in me." - John Deere
Archived
This topic is now archived and is closed to further replies.