40 minutes ago, Bert Pieke said:

If you use the TDS GTN, this G3X will also display the WPT information correctly on the PFD.

No, I use the PMS50. What does your mod change exactly?

55 minutes ago, Bert Pieke said:

Personally, I prefer the RV14A, since I can equip it with the TDS GTN 750, which makes for a very nice cockpit..

@Bert Pieke, is there any way to get rid of the passenger?

I bought it to use with //42 Campout camp scenery series which are also on sale at Orbx:

//42 FreedomFox / Fox2 - Complete - Orbx (orbxdirect.com)

Edited November 24, 20232 yr by bofhlusr

22 minutes ago, bofhlusr said:

@Bert Pieke, is there any way to get rid of the passenger?

I bought it to use with //42 Campout camp scenery series which are also on sale at Orbx:

//42 FreedomFox / Fox2 - Complete - Orbx (orbxdirect.com)

Was wondering the same, Someone stated that "In order to remove the copilot it must be done in the toolbar's weight menu (not the preflight aircraft menu) and the value must be input at "0.0" and not just "0". Not sure if it works... Ill give it a go.

33 minutes ago, bofhlusr said:

is there any way to get rid of the passenger?

If you bought it in the Marketplace, you may not have access to the flight model cfg file, where I set the copilot weight to zero.

station_load.0 = 200, -8.31917, -1.15, -0.9, TT:MENU.PAYLOAD.PILOT, 1
station_load.1 = 0, -8.31917, 1.15, -0.9, TT:MENU.PAYLOAD.COPILOT, 2

So try the in-flight weight and balance settings to do the same thing..

Edited November 24, 20232 yr by Bert Pieke

6 minutes ago, Bert Pieke said:

If you bought it in the Marketplace, you may not have access to the flight model cfg file, where I set the copilot weight to zero.

station_load.0 = 200, -8.31917, -1.15, -0.9, TT:MENU.PAYLOAD.PILOT, 1
station_load.1 = 0, -8.31917, 1.15, -0.9, TT:MENU.PAYLOAD.COPILOT, 2

So try the in-flight weight and balance settings to do the same thing..

it in fact works........

 

Just tried it and no Co-Pilot

 

Edited November 24, 20232 yr by Ed_S_Pilot

40 minutes ago, Alvega said:

No, I use the PMS50. What does your mod change exactly?

It is based on the WT work and changes the size of the airspeed and altitude readouts for better visuals, and fixes the missing WPT readouts at the top.  I have not tried it with the PMS unit, so cannot say..

3 minutes ago, Bert Pieke said:

It is based on the WT work and changes the size of the airspeed and altitude readouts for better visuals, and fixes the missing WPT readouts at the top.  I have not tried it with the PMS unit, so cannot say..

OK, thanks.

1 hour ago, Bert Pieke said:

If you bought it in the Marketplace, you may not have access to the flight model cfg file, where I set the copilot weight to zero.

station_load.0 = 200, -8.31917, -1.15, -0.9, TT:MENU.PAYLOAD.PILOT, 1
station_load.1 = 0, -8.31917, 1.15, -0.9, TT:MENU.PAYLOAD.COPILOT, 2

So try the in-flight weight and balance settings to do the same thing..

I have the Steam version but tried the in-flight weight and balance settings anyway and that worked. Thank you.

2 hours ago, Bert Pieke said:

Personally, I prefer the RV14A, since I can equip it with the TDS GTN 750, which makes for a very nice cockpit..

Bert,

Does the RV14A come with an option for the TDS GTN750?

Al

20 minutes ago, ark said:

Bert,

Does the RV14A come with an option for the TDS GTN750?

Al

It sure does.. If you get it.. also get my mods for the G3X and standby Attitude Indicator.

 

Edited November 24, 20232 yr by Bert Pieke

1 minute ago, Bert Pieke said:

It sure does..

OK, then how do you select that option?  🤔   I ended up modifying the RV14A PMS50 panel.cfg file to get the TDS GTN750 working.

18 minutes ago, ark said:

OK, then how do you select that option?  🤔   I ended up modifying the RV14A PMS50 panel.cfg file to get the TDS GTN750 working.

Try this (page 5 of the manual): 

https://www.dropbox.com/s/ghxjukmm6hsaj0u/sws-aircraft-vansrv14-tdsgtnxi.zip?dl=0

and my mods:

https://www.dropbox.com/scl/fi/1w16e0xny2ll80e5tv92o/Van-s-RV14-tdsgtnxi-2.4.zip?rlkey=e8jirwd4myzhcpkwrbf2hxrm5&dl=0

https://www.dropbox.com/s/ym95x1xl6u5fii4/WT AJP G3X V7.zip?dl=0

 

 

Edited November 25, 20232 yr by Bert Pieke

44 minutes ago, Bert Pieke said:

Try this:  https://www.dropbox.com/scl/fi/1w16e0xny2ll80e5tv92o/Van-s-RV14-tdsgtnxi-2.4.zip?rlkey=e8jirwd4myzhcpkwrbf2hxrm5&dl=0

I am a bit confused (as usual!) regarding the GTN750 options "big picture".

Is the above your mod, or a mod from SWS? I own both the PMS50 and TDS GTN 750s, and when I loaded the RV14A (MP purchase) the plane came up with the PMS50 panel for some reason. So I modified the panel.cfg file to get the TDS GTN750 working since I didn't see how to switch GTN750s. What I would like to know is does SWS provide a convenient way to switch between the GTN750s, and if so, how is that done? The SWS website and the RV14 manual say both GTN750s are supported, but doesn't mention how to switch back and forth between the two GPS units. Thx.

Al

Edited November 25, 20232 yr by ark

23 hours ago, regis9 said:

How’s the CH701?  

I really like it.  I already had the CH701 and RV-14, so I just picked up the RV-10 in this super sale.

The '701 has a beautifully textured cockpit and flies really well (I have 250 hours in a CH701 derivative and whilst the numbers are just a little off, it feels quite reminiscent of the real thing).

It's my go-to bare bones, STOL LSA in MSFS.

24 minutes ago, ark said:

The SWS website and the RV14 manual say both GTN750s are supported, but doesn't mention how to switch back and forth between the two GPS units.

The manual says that you have to choose at install. Switching would mean uninstall / reinstall.. unless you choose via Addons Linker.  The marketplace may not give you the option..

Edited November 25, 20232 yr by Bert Pieke