December 16, 20232 yr Please help me find out what the best settings could be for an RTX 3060Ti I have set a profile with: - Tripple Buffering ON - Vertical Sync 1/2 Refresh Rate ( I have VSync ON in game ) - Vertilcal Sync - Tear Control Adaptive - Antialiasing Transparency Supersampling 4x Sparse Grid Supersanpling ( have 4 x MSAA in game ) - Threaded Optimization Off It is running at an acceptable level of performance and stability, but I welcome your suggestions !!! Flying gliders since 1980 Flightsimming since 1992 AMD Ryzen 5600x, 32GB RAM, GPU Nvidia RTX 3060 Ti 8 GB, 1 TB and 500 GB nvme2 SSD drives, HP 27" 60Hz LED monitor @ 1920x1080, T16000, Hotas from old X52 Pro, Saitek Combat Rudder Pro (2010 model)
December 16, 20232 yr Really no one can help, every machine is different, what works on one my not on another, Wait for next beta, may get some improvements.
December 16, 20232 yr At what resolution? 4x SGSS is gonna be a lot for a 3060Ti to handle at any resolution. Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
December 16, 20232 yr Not sure half of those are actually functional, considering it's Vulkan. Can tell you Triple Buffering isn't doing anything for you, as that flag is for OpenGL games only. [MSI MPG X870E Carbon | 9800X3D (PBO +200Mhz / -20 Offset) | Corsair 64GB DDR5 (Custom Timings) | RTX 4090 Founders Edition (Undervolted) | WD SNX 850X 4TB + 4TB | Antec Flux Pro]
December 16, 20232 yr Author 1 hour ago, Bob Scott said: At what resolution? 4x SGSS is gonna be a lot for a 3060Ti to handle at any resolution. 1920 x 1080 Flying gliders since 1980 Flightsimming since 1992 AMD Ryzen 5600x, 32GB RAM, GPU Nvidia RTX 3060 Ti 8 GB, 1 TB and 500 GB nvme2 SSD drives, HP 27" 60Hz LED monitor @ 1920x1080, T16000, Hotas from old X52 Pro, Saitek Combat Rudder Pro (2010 model)
December 17, 20232 yr If your system is running OK, as you say, why try to fix something that isn't broken? Wait for 12.1.0 and its promised graphics and performance improvements.
December 17, 20232 yr Author I am not dissatisfied with the graphics but just wanted to find out how much I can push antialiasing, although as it is by default it's more than good to me and my close sight with spectacles 🙂 Only thing I always do is setting refresh rate to half my monitor which is 60Hz, thus getting a more or less solid 30 FPS. But I can actually leave it at VSync only in game and get a consistent 56-60+ FPS all of the time. Flying gliders since 1980 Flightsimming since 1992 AMD Ryzen 5600x, 32GB RAM, GPU Nvidia RTX 3060 Ti 8 GB, 1 TB and 500 GB nvme2 SSD drives, HP 27" 60Hz LED monitor @ 1920x1080, T16000, Hotas from old X52 Pro, Saitek Combat Rudder Pro (2010 model)
December 17, 20232 yr Tried all kinds of settings with Nvidia Inspector, Control Panel etc., nothing gets rid of the bad AA and shimmering, you might as well wait till the 12.1 graphics update, hopefully they're serious about graphics this time.
December 17, 20232 yr 7 hours ago, jcomm said: I am not dissatisfied with the graphics but just wanted to find out how much I can push antialiasing, although as it is by default it's more than good to me and my close sight with spectacles 🙂 Only thing I always do is setting refresh rate to half my monitor which is 60Hz, thus getting a more or less solid 30 FPS. But I can actually leave it at VSync only in game and get a consistent 56-60+ FPS all of the time. Image quality -- specifically its inability to smooth out lines and the swimming/shimmer where it tries -- is XP12's biggest weakness. It's a software deficiency--no settings will fix it at present. Generally, when using VSync, it's better to lock it at a rate that can be consistently maintained (in your example 30 Hz) as excursions below the synced refresh rate produce stutters. Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
January 1, 20242 yr On 12/16/2023 at 9:04 PM, Brian Mackie said: Wait for 12.1.0 and its promised graphics and performance improvements. Are they fixing the night issues ?
January 1, 20242 yr Author 9 hours ago, fluffyflops said: Are they fixing the night issues ? For me one of the worst is the total absence of light on clouds... Both P3D v5 and even better v6, and MFS 2020 do it rather well / convincingly, and I believe even XP11 did it somehow... Regarding lighting, I am not sure if XP properly models the view angle (dead angles) of runway lighting ? Have to check again.... Edited January 1, 20242 yr by jcomm Flying gliders since 1980 Flightsimming since 1992 AMD Ryzen 5600x, 32GB RAM, GPU Nvidia RTX 3060 Ti 8 GB, 1 TB and 500 GB nvme2 SSD drives, HP 27" 60Hz LED monitor @ 1920x1080, T16000, Hotas from old X52 Pro, Saitek Combat Rudder Pro (2010 model)
January 1, 20242 yr 33 minutes ago, jcomm said: For me one of the worst is the total absence of light on clouds... Moon will illuminate clouds in the current XP release. 36 minutes ago, jcomm said: Regarding lighting, I am not sure if XP properly models the view angle (dead angles) of runway lighting ? Have to check again.... I checked and runway lights disappear for example when looking at the runway from the side. So I think it's modeled. "Society has become so fake that the truth actually bothers people".
January 1, 20242 yr Author 6 minutes ago, Murmur said: Moon will illuminate clouds in the current XP release. Yep, that's the only case since a couple versions back... 🙂 not bad, but not enough for a guy like me who wants it not inferior to the scenery and graphics level of Airlinetools A32x 😆 Flying gliders since 1980 Flightsimming since 1992 AMD Ryzen 5600x, 32GB RAM, GPU Nvidia RTX 3060 Ti 8 GB, 1 TB and 500 GB nvme2 SSD drives, HP 27" 60Hz LED monitor @ 1920x1080, T16000, Hotas from old X52 Pro, Saitek Combat Rudder Pro (2010 model)
March 11, 20242 yr On 12/17/2023 at 2:25 PM, jymp said: nothing gets rid of the bad AA and shimmering So I'm not the only one experiencing this. It's so bad at airports it's hard to bear. XP11 did not show this on my system (GTX2070 fwiw), textures/objects/scenery was nice and crisp.
Archived
This topic is now archived and is closed to further replies.