April 14, 20242 yr 46 minutes ago, bennyboy75 said: I had exactly this problem and also wondered the same thing! Life always means expecting surprises. 😅 Go to there forum and post it there, if inibuilds know this issue they will shure fix it with an upcoming update.. If nobody tells them, probably no chance for a fix ! cheers 😉 Edited April 14, 20242 yr by pmplayer 08.2024 new PC is online : ASUS ROG STRIX X670E-F GAMING WIFI Mainboard, AMD Ryzen™ 9 7950X3D Prozessor, G.Skill DIMM 64 GB DDR5-6000 (2x 32 GB) Dual-Kit, MSI GeForce RTX 4090 VENTUS 3X E 24G OC Grafikkarte, 2x WD Black SN850X NVMe SSD 4 TB - Drive C+D, WD Gold Enterprise Class 12 TB for storage HDD, Thermaltake Toughpower GF3 1000W PC - Power supply, Thermalright Phantom Spirit 120 EVO CPU Aircooler with 7 Heatpipes, Design Meshify 2 White TG Clear Tint Tower-Case, 3x 4K monitors 2x32 Samsung 1x27 LG 3840x2160, Windows11 Prof. 23H2 - now Windows11 Prof. 25H2 Flightsimulator Hardware: Honeycomb Throttle Bravo, Logitech Extreme 3D Pro, Logitech Flight Joke System, XBox Controller, some Thrustmaster stuff, Winwing CDU Panels.
April 14, 20242 yr 10 hours ago, JYW said: never noticed that gremlin with the DHL logo. That is one of the funniest bugs in a livery I have ever seen.
April 14, 20242 yr 13 hours ago, JYW said: Can you spot the paint-based oddity going on here? 😄 The funny thing is, I'm sure I've flown this (official Ini) repaint before and never noticed that gremlin with the DHL logo. Strange. I've flown with that livery lots of times and never had the issue. Something happened after yesterday's update perhaps? I'll check it out as I'm about to load a flight. 7950X3D | RTX 4090 | 64GB DDR5
April 14, 20242 yr 24 minutes ago, Cpt_Piett said: Something happened after yesterday's update perhaps? Yep, I reckon that must be it. Actually, after every single one of the updates to the A300, I've had to delete all repaints and reinstall them again from the Ini Manager. If I don't, I'll get a CTD. This issue is I believe with the INI Manager as it's poor in how it handles repaints. Even if you've deleted repaints from your Community folder, the INI Manager will still show then as 'installed' .... forever! If you then click uninstall, it tries to remove the non-existent repaint, but also does something in the core A300 folder too! As much as I love and will defend the venerable A300, I detest INI Manager - it's so unreliable. I've also never got the updates to the A300 to work - if I go through the update process on the INI Manager, I will always get a CTD when trying to load the A300. The solution is I have to delete the full aircraft (and all repaint) and install everything from fresh again - every time there's an update. I don't know if others have these issues or not. Edited April 14, 20242 yr by JYW Bill 😎FS2024 • Currently in 'GA mode' : A2A Comanche 2024 & Aerostar • Black Square C208, Bonanzas, Barons, TBM850, Dukes • COWS DA40 & DA42 • Bluesky Grumman AA5 • FSW Legacy, C24R Sierra & C414 • Echo Falco F8L • FFX HJET, Visionjet and P180 2024 • Got Friends A32 Vixxen • FSReborn Sirius TL3000, Sting S4 and Piper M500 • Flyboy Rans S6S • Skyward DA50RG • SWS Zenith CH701, RV-8, RV-10, RV-14, PC12 • Milviz C310R • Air Foil Labs Bristell B23 TrackIR • BeyondATC • PMS GTN Payware • RealTurb • Axis & Ohs • FS Realistic Pro9800X3D • RTX 3080 • 64GB DDR5-6000Former PPL IR, grounded by diabetes. Now UK NPPL(M)
April 14, 20242 yr 3 hours ago, JYW said: I don't know if others have these issues or not. I must have been extremely lucky as I’ve never had any issues with iniManager. Strange that it differs so much from person to person. I installed the update today (and along with it iniManager updated some three liveries or so). I’m currently at FL310 and everything is looking good so far. 7950X3D | RTX 4090 | 64GB DDR5
April 14, 20242 yr 18 hours ago, JYW said: The funny thing is, I'm sure I've flown this (official Ini) repaint before and never noticed that gremlin with the DHL logo. Bill, can you remember which version you were using? I just checked in the A300-600RF PW and it seems fine: 7950X3D | RTX 4090 | 64GB DDR5
April 15, 20242 yr 21 hours ago, Cpt_Piett said: Bill, can you remember which version you were using? I just checked in the A300-600RF PW and it seems fine Ha! Yes, that one. The P&W. That weird pic above is literally the same plane that you've shown looking normal! 😄 MSFS ain't half weird sometimes. Bill 😎FS2024 • Currently in 'GA mode' : A2A Comanche 2024 & Aerostar • Black Square C208, Bonanzas, Barons, TBM850, Dukes • COWS DA40 & DA42 • Bluesky Grumman AA5 • FSW Legacy, C24R Sierra & C414 • Echo Falco F8L • FFX HJET, Visionjet and P180 2024 • Got Friends A32 Vixxen • FSReborn Sirius TL3000, Sting S4 and Piper M500 • Flyboy Rans S6S • Skyward DA50RG • SWS Zenith CH701, RV-8, RV-10, RV-14, PC12 • Milviz C310R • Air Foil Labs Bristell B23 TrackIR • BeyondATC • PMS GTN Payware • RealTurb • Axis & Ohs • FS Realistic Pro9800X3D • RTX 3080 • 64GB DDR5-6000Former PPL IR, grounded by diabetes. Now UK NPPL(M)
April 15, 20242 yr 4 hours ago, JYW said: MSFS ain't half weird sometimes. Indeed! The company didn’t go easy on me for opening the cargo door during taxi. Which was the least of my problems that day as I departed from a Denver runway with 10 kts of tailwind to get the shortest taxi distance from the cargo terminal. Even the EFB performance calculator couldn’t make sense of this and refused to calculate V-speeds as I was close to MTOW 😜 I think role-playing a cargo pilot brings out the worst in me… 7950X3D | RTX 4090 | 64GB DDR5
April 15, 20242 yr On 4/13/2024 at 2:26 PM, Cpt_Piett said: I must have been lucky as I haven't had many issues with this plane. At least not any serious ones. I've had it since Feb 25th. I completely missed that update - wasn't subscribed to this thread. That's an extensive list of fixes. Currently en route from NZAA to YMHB, a bit long for my taste (1335nm 3hrs). Was thinking to do a flaps 15/20 landing, but getting a bit confused. So I select flaps 15/20 in the MCDU, but which GPWS switch to use? Previously I’ve used the one on the captain’s side which seem to work. I'm 99% sure that FLAP OVRD switch is only for landing with a non-normal configuration (i.e. loss of hydraulics, slats only, asymmetry, etc.). The switch above the throttles is roughly analogous to the FLAPS 3 setting on the overhead on the A320.
Archived
This topic is now archived and is closed to further replies.