September 2, 20241 yr 1 hour ago, B777ER said: GeForce is no longer available. Have to use their beta app now. but i downloaded Geforce an hour ago ?, the App quit working for me ( spinning circle ) so i uninstalled it yesterday ROG Crossair Hero X670e , 9900X, TUF 4090 , X4 NVME's. OS 2TB 980 Pro , MSFS 2TB WD Black , Kington Fury 64GB ram ( 6000) Corsair RM1000 PSU, Artic Freezer iii 360 AIO . Phanteks P600s Case ,TCL QM8B 50" 120 Hz TV,second 24 inch screen for charts you tube etc, and 11" touch screen for the EFB. Warthog Stick and TCA Captains throttle ( full pack) Velocity 1 Rudder Pedals , extreme3D for the Tiller,Streamdeck XL x2 / Streamdeck +/Streamdeck mini because i like pressing buttons
September 2, 20241 yr Author 2 hours ago, Seabass said: Can it be downloaded and installed after the fact? Absolutely. Just download from nvidia https://www.nvidia.com/nb-no/geforce/geforce-experience/ 2 hours ago, speedyTC said: You could explore this site. That’s the nvidia app, which is still in beta. It gets the job done and adds a few new filters e.g. RTX dynamic vibrance. I tried it a while back but found the interface a bit clunky and buggy. 2 hours ago, B777ER said: GeForce is no longer available. Have to use their beta app now. Not true. It can still be used. 2 hours ago, Abriael said: They mentioned multiple times they're not happy with the blue tint either. I did. In order to get rid of the (to my eyes) yellow tint, I went too far. Off topic: you can refer to me as “he” if you’d like. Having done a fair bit of image editing in Lightroom, I wish nvidia could use tint and temperature sliders, instead of the less intuitive tint colour and tint intensity. Also, I didn’t create this thread only with tint in mind. I just wanted to know how people use the nvidia filters in general. Edited September 2, 20241 yr by Cpt_Piett 7950X3D | RTX 4090 | 64GB DDR5
September 2, 20241 yr 1 hour ago, Cpt_Piett said: Also, I didn’t create this thread only with tint in mind. I just wanted to know how people use the nvidia filters in general. Yes, please. Tired of semantics and BS. Not all of our screens are the same. Some have to be adjusted otherwise it can look bad. Some apparently are built perfectly from the factory and require zero adjustment. Good for them. I think I first mess with shadows and highlights and then move from there to contrast, vibrance and bloom. Then adjust as needed. Tone....not sure what I did there. Piett, I wish people would give suggestions instead of tangents. 7800+4090+64ram Just Flight RJ, 146 and F28, Piper Arrows ---A2A Aerostar and Comanche---Black Square Starship, Duke(s), TBM, Bonanza/BaronV2, KingAir---FSReborn FSR500---COWS Da42---FX P180, HJet & VJet---FlySimWare Chancellor and LearJet---FlightSimStudio EMB175 &P2006T---Fenix 320---PMDG DC6, 737(700+900), 777---C22J---Milviz Cessna 310 & Porter---SimWorksStudios Kodiak, PC12, Zenith & RV14---BigRadials Goose---IndiaFoxEcho MB3339+F35.
September 2, 20241 yr 1 hour ago, Sonosusto said: Piett, I wish people would give suggestions instead of tangents Classic forum annoyance 101 Post : How do I do something? Response : WHY do you want to do something? Or Why don't you do something ELSE? Russell Gough SE London
September 2, 20241 yr Author 5 hours ago, speedyTC said: Desaturation works on the entire image. All the colours. The more you desturate the "less" the colour will be until you end up with a fully greyscale image. The OP is trying to reduce the yellow tint. Desaturating will only result in all the colours being "weakened" but the colour balance will still remain the same. The funny thing is that, even when they appeared to be helpful, they suggested I desaturate the image to fit with their claim that the MSFS color balance is perfectly okay 🤷🏻♂️ @Abriael I think we should just agree that we disagree. You’ve proven your point, and so have I. Well, I haven’t really provided any proof, and don’t see the need to do so. It’s just my opinion. Edited September 2, 20241 yr by Cpt_Piett 7950X3D | RTX 4090 | 64GB DDR5
September 3, 20241 yr 8 hours ago, sonny147 said: but i downloaded Geforce an hour ago ?, the App quit working for me ( spinning circle ) so i uninstalled it yesterday Good to know. Eric
September 3, 20241 yr 7 hours ago, Cpt_Piett said: The funny thing is that, even when they appeared to be helpful, they suggested I desaturate the image to fit with their claim that the MSFS color balance is perfectly okay 🤷🏻♂️ This thread would have been a lot better if it wasn't so thoroughly trolled by argumentative people. Maybe you should just add a yellow tint. At least one person will be happy. Ive seen the screen shots and they look pretty good, seriously. 7800+4090+64ram Just Flight RJ, 146 and F28, Piper Arrows ---A2A Aerostar and Comanche---Black Square Starship, Duke(s), TBM, Bonanza/BaronV2, KingAir---FSReborn FSR500---COWS Da42---FX P180, HJet & VJet---FlySimWare Chancellor and LearJet---FlightSimStudio EMB175 &P2006T---Fenix 320---PMDG DC6, 737(700+900), 777---C22J---Milviz Cessna 310 & Porter---SimWorksStudios Kodiak, PC12, Zenith & RV14---BigRadials Goose---IndiaFoxEcho MB3339+F35.
September 3, 20241 yr 7 hours ago, sloppysmusic said: Classic forum annoyance 101 Post : How do I do something? Response : WHY do you want to do something? Or Why don't you do something ELSE? We do appreciate your settings! 🤣🤣 7800+4090+64ram Just Flight RJ, 146 and F28, Piper Arrows ---A2A Aerostar and Comanche---Black Square Starship, Duke(s), TBM, Bonanza/BaronV2, KingAir---FSReborn FSR500---COWS Da42---FX P180, HJet & VJet---FlySimWare Chancellor and LearJet---FlightSimStudio EMB175 &P2006T---Fenix 320---PMDG DC6, 737(700+900), 777---C22J---Milviz Cessna 310 & Porter---SimWorksStudios Kodiak, PC12, Zenith & RV14---BigRadials Goose---IndiaFoxEcho MB3339+F35.
September 3, 20241 yr On 9/1/2024 at 4:25 PM, Cpt_Piett said: When hearing about the upcoming REX Atmos, I started to tune the filters a bit further. It's been mentioned that there's too much of a yellow tint in the sim, which I agree with. I used the colour filter and applied a tint colour of 30% and a tint intensity of 20%. I think the result is a bit better. Default (HDR): Nvidia filters (HDR): The settings that I currently use: Colour Tint colour 30% Tint intensity 20% Brightness/contrast Contrast 15% Highlights -50% Shadows -10% Details HDR toning 14% I'd be interesting to hear how other people use Nvidia filters. @Cpt_Piett Did you left the other settings in Colour, Brightness/contrast and Details at their Default Values or set them to 0? Thx!
September 3, 20241 yr In NV CP you can also change . For each of them you can set brightness, contrast and gamma Edited September 3, 20241 yr by GSalden 5950x3d 5.4-5.7 GHz - Asus ROG 870 Crosshair Apex - GSkill Neo 2x 24 Gb 6000 mhz / cas 26 - MSI RTX 5090 Gaming Trio OC - 1x SSD M2 6000 2TB - 1x SSD M2 2800/1800 1Tb - Corsair 5400 case - Corsair 360 liquid cooling set - 3x 75’ TCL tv. 13600 6 cores @ 5.1 GHz / 8 cores @ 4.0 GHz (hypterthreading on) - Asus ROG Strix Gaming D - GSkill Trident 4x Gb 3200 MHz cas 15 - Asus TUF RTX 4080 16 Gb - 1x SSD M2 2800/1800 2TB - 2x Sata 600 SSD 500 Mb - Corsair D4000 Airflow case - NXT Krajen Z63 AIO liquide cooling - FOV : 200 degrees My flightsim vids : https://www.youtube.com/user/fswidesim/videos?shelf_id=0&sort=dd&view=0
September 3, 20241 yr Author 6 hours ago, eXpress48 said: @Cpt_Piett Did you left the other settings in Colour, Brightness/contrast and Details at their Default Values or set them to 0? Thx! All the other settings are at default. So far I think nvidia doesn’t provide granular control over colour tint and temperature. At least not on the level we’ve come to expect in a photo editing program. I editing a screenshot using the default Win11 photo app (ie no filters). All I did was to decrease the temperature slightly. Left side is default, right side is edited. It’s a subtle change. Edited September 3, 20241 yr by Cpt_Piett 7950X3D | RTX 4090 | 64GB DDR5
September 5, 20241 yr Author What do people use for sharpening? I've set the AMD Fidelity FX slider to 0. Currently using sharpen at 10 in the details filter. Are there other options that could be better? And what's the difference between sharpen and sharpen+? Btw I've set sharpen in usercfg.opt (along with most of the post-processing settings) to off. 7950X3D | RTX 4090 | 64GB DDR5
September 5, 20241 yr Author I think I'm done tweaking filters for now. Still think the colour temperature is too much on the yellow side. Usercfg.opt: Quote PostProcess Enabled 1 EyeAdaptation 1 ColorGrading 1 Sharpen 0 Fringe 0 LensDistortion 0 Dirt 0 LensFlare 0 FilmGrain 0 Vignette 0 Colour Tint colour 30% Tint intensity 15% Brightness/contrast Contrast 15% Shadows -10% Details Sharpen 10% HDR toning 14% Screenshot: default left, filters right. To me it makes sense that the whites should look white, not yellow. Note: I'm using HDR. Edited September 5, 20241 yr by Cpt_Piett 7950X3D | RTX 4090 | 64GB DDR5
September 5, 20241 yr 1 hour ago, Cpt_Piett said: I think I'm done tweaking filters for now. Still think the colour temperature is too much on the yellow side. Usercfg.opt: Colour Tint colour 30% Tint intensity 15% Brightness/contrast Contrast 15% Shadows -10% Details Sharpen 10% HDR toning 14% Screenshot: default left, filters right. To me it makes sense that the whites should look white, not yellow. Note: I'm using HDR. Way too much blue in the right. I use HDR on a 4k OLED and I would say if you could mix (blend) the above two pics a little more it would look more realistic. Edited September 5, 20241 yr by B777ER Eric
September 5, 20241 yr Author 25 minutes ago, B777ER said: Way too much blue in the right. I use HDR on a 4k OLED and I would say if you could mix (blend) the above two pics a little more it would look more realistic. Thanks for the feedback. I guess I could increase the temperature a bit (by decreasing tint intensity). I'm also on HDR 4K OLED. Edited September 5, 20241 yr by Cpt_Piett 7950X3D | RTX 4090 | 64GB DDR5
Create an account or sign in to comment