February 13, 20251 yr Just dropped. This new Game Ready Driver provides the best gaming experience for the latest new games supporting DLSS 4 technology including Indiana Jones and the Great Circle. Further support for new titles leveraging DLSS technology includes Avowed and Wuthering Waves. In addition, this driver supports the launch of Sid Meier's Civilization VII. Fixed Gaming Bugs [Valorant] Game may crash when starting game [4951583] [Final Fantasy XVI] PC may freeze when exiting game [5083532] [Delta Force] Some PC configurations may experience performance regression when Resizable BAR is enabled [5083758] Fixed General Bugs [3DMark DXR Feature Test] Unusually low score for Blackwell GPUs [5062329] Resolved a compatibility issue caused by version mismatches between current and updated dynamic link library files. [5081921] Don't forget to run Inspector again if you are using DLSS4 etc etc Edited February 13, 20251 yr by St Mawgan 9950X3D - X870E Aorus Master- TUF 5090 OC - 64GB DDR5 - 1500W HXi - Titan 360 RX LCD - 9100 Pro x 2 - LG 45GX950A - HOTAS Warthog with Ava Base
February 13, 20251 yr Unfortunately, the latest NVIDIA products and drivers leave much to be desired. Many will probably be reluctant to try anything if everything works well. 747 Captain for the last 39 years, and still learning.
February 13, 20251 yr Author Seems about the same as the last one here. No better, no worse. No issues though. Works well. 9950X3D - X870E Aorus Master- TUF 5090 OC - 64GB DDR5 - 1500W HXi - Titan 360 RX LCD - 9100 Pro x 2 - LG 45GX950A - HOTAS Warthog with Ava Base
February 13, 20251 yr If you use this new driver, it will remove DLSS 4, it will remove preset J (if you had those on when using the old driver). Here is what DlssIndicator will indicate immediately after installing the new driver, at least that is what happened to me: Note the preset is back to E instead of J like it used to be. And the DLSS version is 3 instead of 3 point something something that was in reality DLSS4. All that you have to do to restore the better settings is what you did to enable DLSS 4 and preset J before on the older display driver. ALSO: The things that were grey out in the Nvidia App for msfs2024 are still greyed out like they were before on the older display driver. 5800X3D, RTX4070, 600 Watt, one or two 1440p 32" screens, 64 GB RAM, 4 TB PCle 3 NVMe, Warthog throttle, VKB NXT EVO stick, Honeycomb Alpha yoke, CH quad, 3 Logitech panels, 2 StreamDecks, Desktop Aviator Trim Panel. Crystal Light VR.
February 13, 20251 yr Here is msfs2024 right before I installed the new Nvidia display driver. This dlss version was actually 4 and the preset was K 5800X3D, RTX4070, 600 Watt, one or two 1440p 32" screens, 64 GB RAM, 4 TB PCle 3 NVMe, Warthog throttle, VKB NXT EVO stick, Honeycomb Alpha yoke, CH quad, 3 Logitech panels, 2 StreamDecks, Desktop Aviator Trim Panel. Crystal Light VR.
February 13, 20251 yr I actually have Preset: C now, after updating driver to this last one. I don't use the nvidia app, anybody now how to have preset K again?, because in nvidia inspector there's no more preset K. Thanks SN737
February 13, 20251 yr and here is what the indicator shows after installing 572.42 AND running the steps in Ian's thread called DLLS 4 Definitive guide: This is actually DLLS 4 and Render Preset K. So if you install the new driver, then run Ian's guide steps to restore DLSS 4 and Preset K. 5800X3D, RTX4070, 600 Watt, one or two 1440p 32" screens, 64 GB RAM, 4 TB PCle 3 NVMe, Warthog throttle, VKB NXT EVO stick, Honeycomb Alpha yoke, CH quad, 3 Logitech panels, 2 StreamDecks, Desktop Aviator Trim Panel. Crystal Light VR.
February 13, 20251 yr 10 minutes ago, Fielder said: and here is what the indicator shows after installing 572.42 AND running the steps in Ian's thread called DLLS 4 Definitive guide: This is actually DLLS 4 and Render Preset K. So if you install the new driver, then run Ian's guide steps to restore DLSS 4 and Preset K. This is with nvidia app. Do you now how to get preset K without installing nvidia app? thx SN737
February 13, 20251 yr Never mind, I found it in nvidia inspector under GLOBAL-DRIVER_PROFILE, DLSS - Forced Preset Letter. SN737
February 13, 20251 yr Bottom line: installing 572.42 will remove DLSS 4 and preset K from MSFS 2024 (and I presume 2020 also). To reset to DLSS 4 and preset K, do as in this thread: 5800X3D, RTX4070, 600 Watt, one or two 1440p 32" screens, 64 GB RAM, 4 TB PCle 3 NVMe, Warthog throttle, VKB NXT EVO stick, Honeycomb Alpha yoke, CH quad, 3 Logitech panels, 2 StreamDecks, Desktop Aviator Trim Panel. Crystal Light VR.
February 13, 20251 yr I am impressed with the new Nvidia display driver. Doing my test flight the fps number was posted in bright orange (by Riva Tuner). It stayed there and did not change for the whole (short) flight from EGLC to EGLL. Did not even change as I taxied down Heathrow runway to the gate after landing. I've never had that good of stability before. (This is the test flight I always do to check after making changes in settings or drivers). 5800X3D, RTX4070, 600 Watt, one or two 1440p 32" screens, 64 GB RAM, 4 TB PCle 3 NVMe, Warthog throttle, VKB NXT EVO stick, Honeycomb Alpha yoke, CH quad, 3 Logitech panels, 2 StreamDecks, Desktop Aviator Trim Panel. Crystal Light VR.
February 13, 20251 yr 1 hour ago, SN737 said: I actually have Preset: C now, after updating driver to this last one. I don't use the nvidia app, anybody now how to have preset K again?, because in nvidia inspector there's no more preset K. Thanks Preset K turned out to offer little to nothing here, so I continue to use Preset C--and this is for both 2020 and 2024. Edited February 13, 20251 yr by Noel Noel System: 9900X3D Noctua NH-D15 G2, MSI Pro 650-P WiFi, G.SKILL 64GB (2 x 32GB) 288-Pin PC RAM DDR5 6000, WD NVMe 2Tb x 1, Sabrent NVMe 2Tb x 1, RTX 4090 FE, Corsair RM1000W PSU, Win11 Home, LG Ultra Curved Gsync Ultimate 3440x1440, Phanteks Enthoo Pro Case, TCA Boeing Edition Yoke & TQ, Cessna Trim Wheel, RTSS Framerate Limiter w/ Front Edge Sync. Aircraft used in MSFS 2024: Fenix A320, Aerosoft CRJ, FBW, WT 787X, I-Fly 737 MAX 8, Citation Longitude.
February 13, 20251 yr 30 minutes ago, Noel said: Preset K turned out to offer little to nothing here, so I continue to use Preset C--and this is for both 2020 and 2024. Now that you mention it, just tried both and ended up noticing that Preset C has a slightly better result with ghosting issue. SN737
February 13, 20251 yr 30 minutes ago, SN737 said: Now that you mention it, just tried both and ended up noticing that Preset C has a slightly better result with ghosting issue. There you go. I also use SecondaryScaling in 2020, set to 1.5, and that helps a little too. Noel System: 9900X3D Noctua NH-D15 G2, MSI Pro 650-P WiFi, G.SKILL 64GB (2 x 32GB) 288-Pin PC RAM DDR5 6000, WD NVMe 2Tb x 1, Sabrent NVMe 2Tb x 1, RTX 4090 FE, Corsair RM1000W PSU, Win11 Home, LG Ultra Curved Gsync Ultimate 3440x1440, Phanteks Enthoo Pro Case, TCA Boeing Edition Yoke & TQ, Cessna Trim Wheel, RTSS Framerate Limiter w/ Front Edge Sync. Aircraft used in MSFS 2024: Fenix A320, Aerosoft CRJ, FBW, WT 787X, I-Fly 737 MAX 8, Citation Longitude.
February 13, 20251 yr 5 minutes ago, Noel said: There you go. I also use SecondaryScaling in 2020, set to 1.5, and that helps a little too. Yeah tried it but it increases gpu vram a lot and I'm very limited there (just 12GB), but thanks for the tip. SN737
Create an account or sign in to comment