April 18, 20251 yr But it might not do anything, I can't be sure because I can't use openXRtoolkit any more (I have to figure out how I messed it up). So I can't read my fps in VR. Anyway, the method is to turn on FG for VR in usercfg.opt (because you can't do it in msfs options in the sim). =>> Never edit usercfg.opt while msfs in running, it will reset all your options in the sim 😞 1 Open msfg 2024, or I suppose it will work in 2020 too, and go to msfs options and turn on FG in the general tab (not the VR tab). And if you use dlss for the FG then turn FG on choosing NVIDIA DLSS, and be sure to now close msfs. And usercfg.opt will now have changed by the sim to these lines: FrameGeneration DLSSG and FrameGenerationVR OFF 2 Edit usercfg.opt with notepad to read this: FrameGeneration DLSSG and FrameGenerationVR DLSSG 3 restart msfs 2024 and fly. If you have openxrtoolkit, you may now show more fps. I'm not sure. I used this method, and it looked like an improvement, but I can't be sure if anything actually changed in performance, but the .opt file keeps on showing DLSSG in the VR FG line of the file. 5800X3D, RTX4070, 600 Watt, one or two 1440p 32" screens, 64 GB RAM, 4 TB PCle 3 NVMe, Warthog throttle, VKB NXT EVO stick, Honeycomb Alpha yoke, CH quad, 3 Logitech panels, 2 StreamDecks, Desktop Aviator Trim Panel. Crystal Light VR.
April 18, 20251 yr 5 hours ago, Fielder said: ... I can't use openXRtoolkit any more (I have to figure out how I messed it up). So I can't read my fps in VR. Have you tried uninstalling the toolkit and reinstalling it. I had to do this recently and it worked fine. The registry got messed up and the reinstall fixed it. Mike Beckwith
April 18, 20251 yr Author Yes, I tried that using paid version iobit uninstaller which removes all traces, including what's in the registry, and reinstalled it. It still doesn't work. As soon as I turn on toolkit the screen shrinks to a tiny size in the VR headset. I think there's a setting wrong in the toolkit. 5800X3D, RTX4070, 600 Watt, one or two 1440p 32" screens, 64 GB RAM, 4 TB PCle 3 NVMe, Warthog throttle, VKB NXT EVO stick, Honeycomb Alpha yoke, CH quad, 3 Logitech panels, 2 StreamDecks, Desktop Aviator Trim Panel. Crystal Light VR.
April 18, 20251 yr 22 hours ago, Fielder said: you may now show more fps. you may also enter in the usercfg.opt "make everything run 10 x faster and give me 20 x more fps" has the same effect. "I'm not sure." I am. 😀 p.s. if you can not use other tools to display fps, you could always turn DEV MODE on and have it display fps. AMD 7800X3D, Windows 11, Gigabyte X670 AORUS Elite AX Motherboard, 64GB DDR5 G.SKILL Trident Z5 NEO RGB (AMD Expo), RTX 4090, Samsung 980 PRO M.2 NVMe SSD 2 TB PCIe 4.0, Samsung 980 PRO M.2 NVMe SSD 1 TB PCIe 4.0, 4K resolution 50" TV @60Hz, VR: Pimax Crystal Light + HP Reverb G2 @ 90 Hz, Honeycomb Bravo Throttle Quadrant, be quiet 1000W PSU, Noctua NH-U12S chromax.black air cooler. 60-130 fps. no CPU overclocking. very nice.
April 18, 20251 yr Author I have never been able to see the dev mode fps in VR in 2020 nor in 2024. It shows in 2D of course, but not in VR. 5800X3D, RTX4070, 600 Watt, one or two 1440p 32" screens, 64 GB RAM, 4 TB PCle 3 NVMe, Warthog throttle, VKB NXT EVO stick, Honeycomb Alpha yoke, CH quad, 3 Logitech panels, 2 StreamDecks, Desktop Aviator Trim Panel. Crystal Light VR.
April 18, 20251 yr Well, im going to try this soon..ill let you know how it goes i9 13900KF @ 5.5Ghz | MoBo MSI PRO Z690-A WiFi | Corsair Vengeance Black RGB RS 64gb DDR4 3200MHz | MSI GeForce RTX 5090 Vanguard SOC 32GB | MP33 Pro 1TB M.2-2280 NVME SSD for OS | Samsung 870 QVO 2.5" 4TB SSD SATA2 | Samsung 990 PRO 2TB | Corsair RM1000X 2021 1300W 80 Plus Gold PSU | Antec Dark Fleet DF700 Flux Gaming Case | Win 11 home | Samsung 65" 4K TV | G512 Keyboard | Razer Basilisk V2 Mouse | WinCtrl URSA MINOR 32 Throttle Metal / 32 PAC Metal | WinCtrl Ursa Minor Sidestick |Velocity One Rudder | MiniCockpit FCU and EFIS | WinCtrl MCDU | Stream Deck XL | Tobii Eye Tracker | Pimax Crystal Light | Doug
April 19, 20251 yr 22 minutes ago, Fielder said: I have never been able to see the dev mode fps in VR in 2020 nor in 2024. It shows in 2D of course, but not in VR. HP Reverb G2: Edited April 19, 20251 yr by turbomax AMD 7800X3D, Windows 11, Gigabyte X670 AORUS Elite AX Motherboard, 64GB DDR5 G.SKILL Trident Z5 NEO RGB (AMD Expo), RTX 4090, Samsung 980 PRO M.2 NVMe SSD 2 TB PCIe 4.0, Samsung 980 PRO M.2 NVMe SSD 1 TB PCIe 4.0, 4K resolution 50" TV @60Hz, VR: Pimax Crystal Light + HP Reverb G2 @ 90 Hz, Honeycomb Bravo Throttle Quadrant, be quiet 1000W PSU, Noctua NH-U12S chromax.black air cooler. 60-130 fps. no CPU overclocking. very nice.
April 19, 20251 yr 15 minutes ago, vonduck said: ill let you know how it goes AMD 7800X3D, Windows 11, Gigabyte X670 AORUS Elite AX Motherboard, 64GB DDR5 G.SKILL Trident Z5 NEO RGB (AMD Expo), RTX 4090, Samsung 980 PRO M.2 NVMe SSD 2 TB PCIe 4.0, Samsung 980 PRO M.2 NVMe SSD 1 TB PCIe 4.0, 4K resolution 50" TV @60Hz, VR: Pimax Crystal Light + HP Reverb G2 @ 90 Hz, Honeycomb Bravo Throttle Quadrant, be quiet 1000W PSU, Noctua NH-U12S chromax.black air cooler. 60-130 fps. no CPU overclocking. very nice.
April 19, 20251 yr Author 1 hour ago, turbomax said: HP Reverb G2: I used to have a Reverb g2, could not see the dev mode menu in VR and still can't see it in my PimaxCrystalLight. It displays fine and I can see it in 2D. But I managed to fix OXRtoolkit, my going to MENU | RESTORE DEFAULTS. I had to go there blind because I could not see the menu while navigating to that spot in the menu. But finally I got there by trial and error, It took me 2 hours. But now I can use OXRtk again ! 5800X3D, RTX4070, 600 Watt, one or two 1440p 32" screens, 64 GB RAM, 4 TB PCle 3 NVMe, Warthog throttle, VKB NXT EVO stick, Honeycomb Alpha yoke, CH quad, 3 Logitech panels, 2 StreamDecks, Desktop Aviator Trim Panel. Crystal Light VR.
April 19, 20251 yr your thread title is misleading because it does not work in vr, and hasn't for the last 5 years. rather: "how to turn FG ON and why it still doesn't work because of excessive latency, according to NVidia" AMD 7800X3D, Windows 11, Gigabyte X670 AORUS Elite AX Motherboard, 64GB DDR5 G.SKILL Trident Z5 NEO RGB (AMD Expo), RTX 4090, Samsung 980 PRO M.2 NVMe SSD 2 TB PCIe 4.0, Samsung 980 PRO M.2 NVMe SSD 1 TB PCIe 4.0, 4K resolution 50" TV @60Hz, VR: Pimax Crystal Light + HP Reverb G2 @ 90 Hz, Honeycomb Bravo Throttle Quadrant, be quiet 1000W PSU, Noctua NH-U12S chromax.black air cooler. 60-130 fps. no CPU overclocking. very nice.
April 19, 20251 yr I think this may be a classic example of a naming convention lost in translation, FrameGen has never worked in VR so maybe they mean something else. Pico Neo3 Link VR - Windows 11 64bit, Gigabyte Z590 Aorus Elite Mobo, i7-10700KF CPU, Gigabyte RX 9070 XT OC 16gb (AMD GPU), 32gig Corsair 3600mhz RAM, SSD x2 + M.2 SSD 1tb x1 Saitek X45 HOTAS - Saitek Pro Rudder Pedals - Logitech Flight Yoke - Homemade 3 Button & 8-directional Joystick Box, SNES Controller (used as a Button Box - Additional USB Numpad (used as a Button Box)
April 19, 20251 yr Author The bottom line. turning on FG in usercfg.opt does not increase fps. But it does cause instability, i.e. suddenly all controllers will stop working and frame rates will drop drastically. It comes and goes. So I had to turn it back OFF in usercfg.opt. Off topic, but performance is up in the latest beta. I think it is almost ready to go official. Using mouse and EFB is not a problem in VR in the latest beta. 5800X3D, RTX4070, 600 Watt, one or two 1440p 32" screens, 64 GB RAM, 4 TB PCle 3 NVMe, Warthog throttle, VKB NXT EVO stick, Honeycomb Alpha yoke, CH quad, 3 Logitech panels, 2 StreamDecks, Desktop Aviator Trim Panel. Crystal Light VR.
April 20, 20251 yr So this topic is about.....nothing? I read the title and thought somehow FG was now available in VR. Kael Oswald 9950X3D/ 64GB DDR5 6200 @ CL30 / Custom Water Loop / RTX 5090 / 3 x 48" LG C4 OLEDs
April 20, 20251 yr 49 minutes ago, KL Oo said: 1) So this topic is about.....nothing? 2) I read the title and thought somehow FG was now available in VR. 1) yes, absolute nonsense 2) not available in VR, and has never been for the past 5 years. If it was available all of a sudden, don't you think Microsoft would have made a huge announcement? Nvidia said FG in VR is not possible due to too much latency. I don't know why he started this and even talks about improved fps. complete bogus. Edited April 20, 20251 yr by turbomax AMD 7800X3D, Windows 11, Gigabyte X670 AORUS Elite AX Motherboard, 64GB DDR5 G.SKILL Trident Z5 NEO RGB (AMD Expo), RTX 4090, Samsung 980 PRO M.2 NVMe SSD 2 TB PCIe 4.0, Samsung 980 PRO M.2 NVMe SSD 1 TB PCIe 4.0, 4K resolution 50" TV @60Hz, VR: Pimax Crystal Light + HP Reverb G2 @ 90 Hz, Honeycomb Bravo Throttle Quadrant, be quiet 1000W PSU, Noctua NH-U12S chromax.black air cooler. 60-130 fps. no CPU overclocking. very nice.
Create an account or sign in to comment