April 29Apr 29 Are you able to fetch the active Simbrief flightplan on your FMC ? I always get an error of invalid uplink, and I do have the correct Simbrief ID set on the EFB ACARS menu ? What Simbrief profile are you using ? Thx! Flying gliders since 1980 Flightsimming since 1992 AMD Ryzen 5600x, 32GB RAM, GPU Nvidia RTX 3060 Ti 8 GB, 1 TB and 500 GB nvme2 SSD drives, HP 27" 60Hz LED monitor @ 1920x1080, T16000, Hotas from old X52 Pro, Saitek Combat Rudder Pro (2010 model)
April 29Apr 29 I can fetch a flight plan, but it's usually not the one generated by Simbrief. The winds never uplink. I have my Simbrief ID set properly, and I always hit the "Initialize Flight" button on the EFB. The PMDG flight plans and wind uplinks are always correct. Pete Locascio Intel Core Ultra 9 285K, Nvidia RTX 5090, Samsung 9100 Pro 2&4 TB Drives, 64 GB RAM, Asus Z-890 motherboard.
April 29Apr 29 1 hour ago, jcomm said: Are you able to fetch the active Simbrief flightplan on your FMC ? Yes.
April 29Apr 29 Speaking of IFly....any news about the SP2? 9950X3D, X870E ROG CROSSHAIR HERO, Corsair Dominator Titanium 64GB DDR5-6000 PC5-48000, ASUS RTX 5070Ti 16GB, 9100 PRO 4TB Samsung ,990 PRO 4TB Samsung, AX1600i 1600 Watt 80 Plus Titanium ATX, ASUS 360 ARGB EXTREME 360mm Liquid CPU Cooling Kit.
April 29Apr 29 35 minutes ago, G-YMML1 said: Speaking of IFly....any news about the SP2? No. Also not the topic of this thread. Edited April 29Apr 29 by Farlis
April 29Apr 29 Author Just completed a new iFly 737 MAX session, no way could I uplink the route to the FMC 😞 I end up typing it myself, but I can't really understand where the problem is... Edited April 29Apr 29 by jcomm Flying gliders since 1980 Flightsimming since 1992 AMD Ryzen 5600x, 32GB RAM, GPU Nvidia RTX 3060 Ti 8 GB, 1 TB and 500 GB nvme2 SSD drives, HP 27" 60Hz LED monitor @ 1920x1080, T16000, Hotas from old X52 Pro, Saitek Combat Rudder Pro (2010 model)
April 29Apr 29 are you using your ID number or username? You need to use the number, at least that's what I'm using. Then on the Route page hit FLT PLAN Request and wait. 3 hours ago, tamba765 said: but it's usually not the one generated by Simbrief. The winds never uplink. Works fine here. Edited April 29Apr 29 by Tuskin38
April 29Apr 29 1 hour ago, jcomm said: Just completed a new iFly 737 MAX session, no way could I uplink the route to the FMC 😞 I end up typing it myself, but I can't really understand where the problem is... you need to request route in the fmc, you cant uplink it from the efb I7-8700k,Corsair h1101 cooler ,Asus Strix Gaming Intel Z370 S11 motherboard, Corsair 32gb ramDD4,, gtx 1080ti Card, RM850 power supply Peter kelberg
April 30Apr 30 Author 6 hours ago, pete_auau said: you need to request route in the fmc, you cant uplink it from the efb Yes, I didn't write the correct procedure, but that's what I do - I make a route request from the FMC ROUTE Pg. Incorrect route uplink is always showns after a few seconds. The first time I did it it went through the usual "handshake" with Navigraph to authorize the app to fetch the route from there. Navdata cycles are the same in MSFS 2024 and the iFly 737 MAX, as per the Navigraph Hub. I usually do not click "Initialize Flight" but in my last tries I even did that... OFC even if the route correctly uplinks I don't think the Payload & Fuel is able to syncronize anyway, and that will always have to be manually set through the Payload and Fuel pages of the EFB, but heck, at least the route should be uplinkable 😕 @Farlis how do you fetch it? what is the exact procedure you follow? Thx ! Flying gliders since 1980 Flightsimming since 1992 AMD Ryzen 5600x, 32GB RAM, GPU Nvidia RTX 3060 Ti 8 GB, 1 TB and 500 GB nvme2 SSD drives, HP 27" 60Hz LED monitor @ 1920x1080, T16000, Hotas from old X52 Pro, Saitek Combat Rudder Pro (2010 model)
April 30Apr 30 Author I even followed the following tutorial: iFly 737 MAX Setup Guide | EFB & FMC Tutorial for Microsoft Flight Simulator Flying gliders since 1980 Flightsimming since 1992 AMD Ryzen 5600x, 32GB RAM, GPU Nvidia RTX 3060 Ti 8 GB, 1 TB and 500 GB nvme2 SSD drives, HP 27" 60Hz LED monitor @ 1920x1080, T16000, Hotas from old X52 Pro, Saitek Combat Rudder Pro (2010 model)
April 30Apr 30 1 hour ago, jcomm said: I even followed the following tutorial: iFly 737 MAX Setup Guide | EFB & FMC Tutorial for Microsoft Flight Simulator that's what i follow, not in that order though I7-8700k,Corsair h1101 cooler ,Asus Strix Gaming Intel Z370 S11 motherboard, Corsair 32gb ramDD4,, gtx 1080ti Card, RM850 power supply Peter kelberg
April 30Apr 30 Just to add have you tried posting on their discord usually will get a quick response I7-8700k,Corsair h1101 cooler ,Asus Strix Gaming Intel Z370 S11 motherboard, Corsair 32gb ramDD4,, gtx 1080ti Card, RM850 power supply Peter kelberg
April 30Apr 30 Author 51 minutes ago, pete_auau said: Just to add have you tried posting on their discord usually will get a quick response Well, I don't use Discord :-/, but thx anyway... Flying gliders since 1980 Flightsimming since 1992 AMD Ryzen 5600x, 32GB RAM, GPU Nvidia RTX 3060 Ti 8 GB, 1 TB and 500 GB nvme2 SSD drives, HP 27" 60Hz LED monitor @ 1920x1080, T16000, Hotas from old X52 Pro, Saitek Combat Rudder Pro (2010 model)
April 30Apr 30 Author 27 minutes ago, Vitold69 said: You can download into FMC not just flight plan only but winds as well. If only I could D/L the FPL it would be just fine... Edited April 30Apr 30 by jcomm Flying gliders since 1980 Flightsimming since 1992 AMD Ryzen 5600x, 32GB RAM, GPU Nvidia RTX 3060 Ti 8 GB, 1 TB and 500 GB nvme2 SSD drives, HP 27" 60Hz LED monitor @ 1920x1080, T16000, Hotas from old X52 Pro, Saitek Combat Rudder Pro (2010 model)
Create an account or sign in to comment