ideoplastic

Below screenshots that show the scenery in P3Dv5.1+H consumes high GPU memory and an additional chunk of my 8MB GPU memory. Also screenshot in the same parking spot without the scenery. https://flic.kr/p/2kuLUZo https://flic.kr/p/2kuQAiR Will drop a line to the developer to see if he can improve the scenery to reduce GPU usage.

Got Santo Domingo yesterday and did a flight SBEG-MDSD. The airport is definitely an improvement from anything previous, and is nicely done considering the low price. Later after restating the PC decided to depart from the same airport for another flight and got the "Run out of memory" message, however this didn't happen after landing during the previous flight and before placing the blame on the scenery I will investigate further and will let you know the results after further testing later today. The developer states in the pdf "My P3Dv5 dilemma. I’m not promoting this airport to be utilized in P3D-V5 because I myself have been having technical issues operating this airport with the P3D-v5. At the moment, I can only encourage users to operate it in P3D-V4.5. If you like,go ahead and utilize it in P3D-V5."

If you have a file named AICM-FLATTENCERRO.bgl you do not have the latest version of the installer, because no longer exists in the scenery. MMMX works in v5.1+H for me without any changes.Must also let you know what I have installed as default.: FS Global Ultimate - NG 2020 FTX , Orbx FTX, Vector and all Landclasses to-date. You should have 3 folders: MMX-Terrain, MMMX-City and MMMX. Answered a similar question on previous couple of posts with screenshot. https://www.avsim.com/forums/topic/593323-mmmx-for-p3d5/?tab=comments#comment-4449967

Didn't know that but then I rarely do night flights unless flying in an event. Regards

I have flown and departed from Valencia without any issues. The only thing it lacks is dynamic lighting which makes the airport rather dark without it. https://www.youtube.com/watch?v=0EInz4Kxhqc&feature=youtu.be

Well my point is that many people here have blamed AIG, FLAi etc. when in fact they were not at fault, and if I read correctly in this posts seems Unknown others were trying to utilise the models to port them to MSFS2020 without obtaining permission to do so, creating all kinds of speculation. As for anyone else, that is the many users of FLAi and the people that consolidated the work for its use in Vatsim, they do mattter a hellof a lot more than the culpable.

So which group was trying to use the models in FLAi to create their MSFS2020 project. Since AIG and FLAi have been mentioned and are complying with the creators wishes, why don't we know the name of the offending group.

My basic installation is the default scenery plus FS Global Ultimate - NG 2020, FTX, Orbx FTX, Vector and Landclass for North America, Europe, South America and Affrica, plus Orbx Libs, all these are permanently in the scenery.cfg then MMMX Terrain, MMMX City and the MMMX scenery folder. This has always worked for me through v4 and v5. Surprised that some users are having issues, may be it is the Orbx installed scenery that makes it work seamlessly. The installer is TAXI2GATE_MMMX_T2G.exe size 1,234,628KB. Below the last entries in the scenery.cfg [Area.166] Title=FTXAA_ORBXLIBS Local=ORBX\FTX_AU\FTXAA_ORBXLIBS Active=TRUE Required=FALSE Layer=166 [Area.167] Local=F:\SCENERY V5\MEXICO\MMMX-T2G\MMMX-terrain Title=MMMX-terrain Required=FALSE Active=TRUE Layer=167 [Area.168] Local=F:\SCENERY V5\MEXICO\MMMX-T2G\MMMX-city Title=MMMX-T2G\MMMX-city Required=FALSE Active=TRUE Layer=168 [Area.169] Local=F:\SCENERY V5\MEXICO\MMMX-T2G\MMMX Title=MMMX Required=FALSE Active=TRUE Layer=169 Hope this helps, I know there have been new installers issued since I first bought it in 2013. Check with the developer or seller to make sure you have latest version.

T2G MMMX running with no issues and no mods in P3Dv5.1+H https://flic.kr/p/2kq9kfq

FSDG Paro working with no discernable issues in P3Dv5.1+H https://flic.kr/p/2kodiFA

Should work in v5, add it to the sim anc check it out.

I respect other peoples preferences but to say AO is essential is certainly not true for me. Have huge amounts of Scenery and continue to use SceneryConfig Editor because all my mesh, Orbx scenery, etc is in the P3D root folder. Large number of scenery never came with add-on.xml so adding them to the scenery.cfg takes a couple of minutes. In the Prepar3D v5 Add-ons folder, there are always folders with .xmls such as Active Sky P3Dv5, AI lights reborn, FLAi, FSDreamteam Addon Manager and exclude, FSUIPC, Global_AI_Ship_Traffic_V2, Immersion Packages, and SODE. If an airport scenery comes with xml I simply drop it in the folder, when the flight finishes I drop it back to where it was before. This method has always worked for me without issues, using a simpler and clearer interface in my opinion and it still works in P3dv5.1HF1. Did try Lorby's but to be honest didn't like it and found it too complicated. Bests

Apologies for the second post by mistake. Mods please delete.

I agree with your comments completely and never use it.

Thanks for the feedback, I wasn't aware this was happening until recently. However after starting P3D and manually starting RealTraffic and FSXseeconTraffic it worked flawlessly for the duration of the flight, of nearly 4 hours. I'll bear in mind your advice and will keep an eye on it and if it happens again I'll let you know. Is there an alternative to get the traffic without RealTraffic? Best regards

Just wanted to let you know that I fixed the issue by copying the exe.xml in the \config\SimConnect to the root folder of P3D and editing it with the full path to PSXseecontraffic. So far so good no more errors. Easy on the turkey today.......😃

I never experienced it until recently, it is a shame as it makes RealTraffic useless for me unless I keep restarting the app every 3 minutes or so. Thank you for your reply. Merry Xmas to you and your dear ones.

Been having an error message recently which stops RealTraffic updating aircraft positions. The error message is: Simconnect problem: no user aircraft position update received for 10 seconds. I have been running Simconnect without any problems which are uused by other Programs. Currently using latest version of P3Dv5. Advice greatly appreciated.

Have been using Orbx Central since its very beginning and it is improving all the time by adding scenery and software from various developers. I have Orbx Australia 2 and New Zealand as well as all the major airports and some smaller ones for both countries. As far as photoreal scenery is concerned I have all the Gibson scenery but disappointed that there is no coverage for the whole country by any developer and cannot understand why Queensland. South and Western Australia have not been created, ditto with New Zealand.

Mega Scenery Switzerland and believe there is another one, Switzerland Professional X that appears to have seasonal textures.

Well I got around it by simply using the Nvidia Manager and tweaking the brightness, contrast and gamma to achieve my desire result. However have to turn off EA for I have not been able to change with anything while it's on.

I'm not sure so far, since v5.1 and now HF1 the lighting inside the virtual cokpit is extremely dark so at the moment I turn it off and get better performance and the sort of environment sky wise that was available under 4v4.5. Not ideal I know, considering the new 3D weather available with EA but the shaders that get injected when activating it are most likely the reason for such dark environment.

I am using the icon created by Prepard3d at time of installation and always right click and select "Run as Administrator" the sim starts up ALRPE starts also and then the Immersion Manager error appears as per screenshot, It is a small png file that can be downloaded. https://mega.nz/file/3uhG0LpL#WA984YlWDTpLMwJ7gv77xHR1NXXexqoxSCPRr1seH9k

That's exactly what I have done in the shortcut and the compatibility tabs. Hopefully now that updated to v5.1 hf1 it won't occur again, if it does will let you know. Thanks for your reply.

I have this issue with the immersion package. Everytime I start P3D 5.1 as an administrator I get this notice popping up that tells me I need to start the sim as an administrator, and restart the sim. I am the admin and have even ticked under P3D icon compatibility to run this program as an Administrator, even after this still pops-up. Any idea what's wrong here?