kiwimail

Thanks for the info.I guess I'll just have to ignore it.FS looks too good with quality mesh to go back to default.

Hi Everyone.Hope you can help with some suggestions.All of the sudden all my airports now have a raised deck around it.They all looked like they are being build on a Mesa just like that famous one at Sedona.I have FS Global Mesh(I think it's 76m) intalled and other areas has Justin Tymes 38m mesh as well.In FS9 config the Terrain Max Vertex Level is set at 21.Is this an issus with FS and add on mesh or can it be fixed.It's really hard to land properly when the elevation is several hundred feet off, not to mention that it really kills the immersion factor.

Thanks Brian.Much appreciated.

I was wondering if anyone knows the file name or whereabouts for these particular lights.The only way I can describe it is they look like "pin sharp stars" on planes and runways.To me they are the most realistic looking set.During a reinstall I have lost them.Looked in the library but still unable to find it.They came with instructions to modify the lights cfg as well to make it work.Any help would be appreciated.Thanks

Any recommendation for a panel?

Hi all.Just bought the 1900C as I wanted the improved cockpit textures and gauges.I was wondering if it's possible to have the same panel in the 1900D as well.ThanksGary

Haven't seen these one's before.Check out those birds above the Bell!http://fsinsider.com/screenshots/default.htm

www.carenado.comMust be getting close to release.Check it out.

Thanks for help.Will take into consideration all you ideas and try a few things out.

My monitor's max refresh rate is 75hz at 1280 x 1024.However,my X800 Pro keeps running it at 70hz.I've tried using the "force" button within CCC but upon reboot it reverts back to 70hz.Does anyone know why it is doing this and how to fix it.Thanks

Hi John.I see you've upgraded your rig.Looks awesome. FS must be running like a dream.Would love to see a couple of screenies from that card of yours.Also,I've enabled AAA on my X800PRO,is it possible to activate HQ AF as well and would it actually make use of it?.Cheers

Good to hear.Then I'm all set!

WOW! Just watched the video.Very impressive and professionally done.Your'e doing a wonderful service for FS and Australia.By the way,I noticed that you use Andy Weirs mesh, however I am using mesh by FS GLOBAL,is this compatible or would it be better with your recommended mesh?. Once again, good job and looking forward to the release day.Cheers

Hi Koorby.Just downloaded the video but having a hard time running it as WMP10 keeps saying the file is using a codec it doesn't recognised.What do I need to see it as it sounds really amazing going by what I have seen. Media Player is up to date. Sorry for the ignorance but I would really love to see this.Gary

Just curious as to anyone else having a problem downloading the BEV texture 1.02 from Flight1. It would go to about 80Megs before it is cut off with the message that it is unable to continue downloading because the server has been reset or to something to that effect. I've tried this twice already and it did the same thing on both occasions. I have Broadband as well.

My biggest problem with FS is the way textures are loaded. I hate to bring this up again but it's the one thing that really puts a damper on my simming. I hope something can be done in the next FS so that what ever visibilty is set at we can see textures without blurries or turning into soup. Surely with graphics card today or in the future this shouldn't be a problem at all. When looking out the window flying in the real world,I don't see any blurred ground textures. This would make a big diffrence for me.

I made the fix through the ccc and recently begin to experience texture corruption that flashes onscreen for a second or so. It's too quick to take a screenshot. The only way I can describe is that it's like textures that are released before being drawn but after seeing what the fix does to the image I'm reluctant to switch it off because it looks soooo good. I've used it on several other games and have had no problems so it may be that FS doesn't like this mode of AA. However ,I would be keen to hear from simmers using NVIDIA's 7800 cards if they encounter any problems as I believe it uses a similar mode of Anti-Aliasing.

Take your time.Yes ,all the region you specified would be great to see.I'm using Christian 's freeware mesh at the moment so it would be interesting to compare. Saving those pennies for the Topo replacement as I write.Cheers

That's awesome Greg.Looking forward to it.Wouldn't mind seeing some screenshots around the Manawatu area.Thanks .Gary

Set ASTT_NA to 0 in the registry location: HKEY_LOCAL_MACHINESYSTEMCurrentControlSetContro lVideo{5A61609A-036A-4D32-B447-F0E42DA9714D}00005A61609A-036A-4D32-B447-F0E42DA9714D this number is different for every one , you may have multiple numbers at the location because of multiple driver installation but only one is active. To be sure just change the value in every one. This enables the option in the CCC tray iconNext create the key ASTT as string(REG_SZ) and set it to 1(REG_BINARY works too) to enable adaptive AA.More info onhttp://www.beyond3d.com/forum/showthread.php?t=24069Hi Word Not Allowed.Have not tried it on CP so I'm not sure if it works.Can't see any reason for it not to.All the Best

OOOPS! So excited I forgot to give instructions.Here are the steps:Set ASTT_NA to 0 in the registry location: HKEY_LOCAL_MACHINESYSTEMCurrentControlSetContro lVideo{5A61609A-036A-4D32-B447-F0E42DA9714D}00005A61609A-036A-4D32-B447-F0E42DA9714D this number is different for every one , you may have multiple numbers at the location because of multiple driver installation but only one is active. To be sure just change the value in every one. This enables the option in the CCC tray iconNext create the key ASTT as string(REG_SZ) and set it to 1(REG_BINARY works too) to enable adaptive AA. More info onhttp://www.beyond3d.com/forum/showthread.php?t=24069

Came across this thread while browsing through some tech forums.Adaptive Anti-Aliasing is evidently supported with the Catalyst 5.9 driver.What this does is it gets rid of those annoying shimmering that you see on fences and autogen trees.It makes the overall picture looks "cleaner".However use AAA wisely as naturally there will be some FPS hit.On my X800 PRO it is minimal and worth the effort.A word of warning,to enable this you have tweak the registry.Do this at your own risk.It does work,you will find an extra icon on the CCC below Temporal AA.I would think that ATI would probably make this official in the next driver.Good Luck.

That's quit a rig you have there Noel.I'm surprised your having problems with the NG.I have "modest" system by todays standard yet still able fly without any issues.The only thing is I don't use the VC as it is terrible on FPS.3.06 533 FSB1.50 Gig RamX800PROWD 120 Gig HD 8Mb cache

Personally,I would like to see MS start again from scratch using all the technology we have today.Like everyone else, I have invested a lot of money on addons to enhanced the experiance but if this brings us a whole new engine with improved performance in graphics and fidelity than all the better.Like the above poster said 'Add-ons will catch up again!".After all,we'll always have FS9.

I know how you feel.Try this.Go to Scenery in your main FS9 folder and replace the "World" folder with a fresh one.I made backups of all important FS files I 'm not quit sure where you would find this folder on the CD's if you have not made any backups.I had CTD immediately after installing a freeware scenery for Princess Julianna Airport.This fixed it for me.It seems that upon activating it within FS it must have relpaced or deleted some files in that folder.Hope it works for you too.Good luck