cyb4

Here the same problem with P3Dv3. Are there any solutions?

Hello, I wanted to install repainted textures on the 777LR, showing the livery of my Virtual Airline. These repainted textures are working within FSX, but not at P3Dv3.1. The tail fin, horizontal stabilizer and engines are black, the rest of the plane shows up correctly. It seems, the "pmdg_777_tail.dds" isn't showing up. The painter did also a repaint for the freighter version of the PMDG 777F. Here the tail unit and engines are showing up correctly within P3Dv3 and also FSX. But if I take this working freighter texture and copy it to the 777LR, it remains black. What can I do? Where is the difference? Best regards Chris

Hey, that looks great! Looking forward to get it for the PMDG 747X.

My FSX Acc. Pack at Vista SP2 64 Bit is not installed on the OS harddisk, it is installed on a seperate one. I never hat these OOM problems with other addon planes (like Feelthere 737, iFly 737), but with the PMDG 737NGX. Usually my FSX runs very smooth. Yesterday I did another try, FSX crashes 5 minutes after airborne out of EDDM. I hope, PMDG will find a solution for this, the plane can't be used in this release version on my 64bit System. Looking forward for an answer by a PMDG member in this threat. Chris

Here the same OOM error with Vista 64bit on my I7 920 and GeForce 560, 6GB Ram, FSX Acc. Pack after departure out of Aerosofts EDDM Mega Airport and photorealistic Aerosoft Germany South scenery and ASE-Weather. Just climbed to 7000 feet, memory ran out. What can we do against these oom problems?

Here the same, I need it also for my VA

Here the installation worked after booting the computer within "Safe Mode" Best regardsChris

Hi,I had the same problem with Win7 32Bit. The installation was working, after booting the computer in Save Mode"Best regardsChris

Rhett,yes I installed your great Terminal D scenery, but I was missing before and after that the default FSX KDFW buildings. Your Terminal D was showing up, but not the other default FSX terminals. After updating the scenery library, as Efussander discribed, the default FSX Terminals of KDFW showed up again.Thanks for your helpChris

Hi there,just landed at KDFW FSX default airport, which should be "high-detailed" airport scenery in my FSX Deluxe Edition. There and also at KATL are all terminal buildings missing, just the gates and the ground layout is visible. At KSEA is everything ok.I don't know, in which folders of FSX these default FSX KDFW and KATL "high-detailed" sceneries are positioned, to find the problem. Therefore I need your help.Thanks in advanceChris Schnaedelbach

I have a dual-boot system, XP and Vista64.With the above workarounds I was able to fly MD-11 tutorial flight within FSX SP2 and XP SP3 without any oom problems. But with my FSX SP2 installation at Vista64 SP1 and 4GB Ram (same computer as XP installation) I got the oom problems again. At EGLL Aerosoft scenery the fuseledge of the parking plane at the gate disappeared, when unlocking the FMC and moving it on the 2nd screen (both windowed mode).Any ideas, why Vista64 has oom problems?

@SAM,could you please explain, how to set the 3G Switch at Vista64? Can't find at google regarding 64Bit OS.Thank youChris

I havn't used ASX at my first tutorial flight. It is installed, but has not been used, when the problems came up.

I wrote, it is a E6400 Dual Core with Vista 64 and 4 GB Ram. Further I own a NVidia 8800GTS 512 MB. FSX SP2 has been running with about 15 FPS at Aerosoft EGLL scenery and PMDG MD-11. Therefore I don't think, my hardware isn't strong enough. In my oppinion the memory hog is based at other reasons.

Hello, here I have Vista 64 (all Microsoft patches installed) and FSX SP2. UTX is installed, but no Beta Patch. I own a E6400 Dual Core and 4 GB Ram, nothing is overclocked. Everything has been working ok yet with that FSX Installation, also other complex payware planes like Wilco Airbusses and Level-D 767X. Just did my first Tutorial flight from EGLL to LSZH. At EGLL the outer textures disappeared after some minutes, also some textures of the Virtual Cockpit. Later, just flying with the 2-D-Cockpit, at the decend the screen of FSX turned black, i just was able to shut down FSX. It seems, this forum threat doesn't offer any solution, or I don't understand, how to fix the problem.Can you help me? Thanks a lot for some solutionsChris Schnaedelbachmember of www.simflight.de review team

Haha, shame in me, I have overseen that in the readme, just read the new features of the FSX version. ;-)Ok, now installation worked fine with the way, you suggested.

I have a dual boot system, XP for FS9 and Vista 64Bit for FSX. Both simulators are on the same partition but FSX hasn't been installed to FS9 and FS9 hasn't been installed to the XP system.I had the same error message when I installed my PMDG744 in the FSX within Vista64 , allthough I never installed FS9 on my Vista system. What can I do? What is the update for FS9 doing? Any new features for the FS9 version, which havn't been released yet?Thanks for an answerChris

Thanks Bryan for your patience and the solution to solve the problem.It seemed, that the FSX Security Warning regarding the FS2Crew files has not been working.After changing several E-Mails with Bryan, I backed up the fsx.cfg file and deleted it, de-installed FS2Crew A320 and re-installed it. After that, when loading FSX the first time, I have been asked, if I want to trust the publisher of FS2Crew and everything worked fine.Great support, thanks

Hello Bryan,thanks for your fast responce. As I told, Wilco A320 PIC is running without any problems at Vista 64, FSX SP1 and also with the navigraph database. Just after installing FS2Crew, FSX is crashing to desktop, when A320PIc is selected. The joystick (Logitech Wingman Extreme) is plugged in all the time. I will do a screenshot from the error report and send it directly to you.Have a nice weekendChris

HelloI own FS X SP1 (German Edition) running on German Vista 64 Home Premium and Wilco A320 (latest Version 3a). Today I bought FS2Crew for the Wilco A320.When loading Wilco A320 (of course in 2-D-Panel Mode) with FS2Crew panel file FSX crashes to desktop. When switching to the default panel file, FS X and Wilco A320 are loading without any problems.What can I do?Please helpThanksChris Schnaedelbach

This topic has been moved by the moderator of this forum. It can be found at:http://forums.avsim.net/dcboard.php?az=sho...topic_id=221182

Hello, thanks for the replays.The trafficinfo.dll is there in the "modules" folder. Before installing FS9.1 patch, I copied all default FS2004 *.dll in the modules folder. Even before the patch and after the patch FS9 crashes to desktop when TCAS is set to FS9.

Hi,I belong FS9 and PMDG 736 up to 739. This runs at Win XP with Service Pack2. Either with unpatched and patched FS9 and completely patched PMDG my FS9 crashes to desktop, when TCAS is activated and when TCAS is assigned to FS2004 in the PMDG menue of FS9. At the error sending report of FS9 there you can read, that pmdg_737ng-main.gau causes the crash. If TCAS is assigned in the PMDG menu to FSUIPC (also newest version), FS9 will not crash.What is wrong?

at me this happens sometimes, when I activate TCAS at the PMDG.

I have the same problem, it seems that that is a bug, when you touched the spoilers lever, the horn works, eben if t/o settings are ok.Chris