-
FS9 Major problem with 2 displays (fullscreen mode)
Bera replied to Bera's topic in Video Hardware: Monitors | Multi-Monitors | Video Cards | Drivers etcThank you for the replies.Problem solved with 190.38 drivers. \\ Perttu
-
Problem Nvidia GTS 250 - 2 displays
Problem solved - apparently newest drivers were the root cause. 190.38 drivers installed and now performance is as expected!
-
Problem Nvidia GTS 250 - 2 displays
Hi!I did a small system upgrade and got the Nvidia GTS 250 card to replace Ati Radeon 4670.Now everything runs exactly as I expected as long as I do the following.- Load the Pmdg M11 at a dense airport in full screen mode all setting maxed with single monitor, FPS stable at 50 (locked)- Go to windoved mode and move overhead panel into monitor 2 and back to fullscreen mode again, FPS between 15-20 regardless of the locationI have the latest Nvidia driver and Nhancer configured as should. System specs are:Asus P5QIntel core 2 E8400ASUS GTS250 DK PCIE 512MB DVI/VGA/HDMI2*1 Mbit RAMWindows Xp (SP3) 32-bitAs said system is stable, when benchmarking results are on the numbers. FS never crashes.So problem is only when trying to run 2 displays in full screen mode - any ideas what might be wrong? \\ Perttu
-
FS9 Major problem with 2 displays (fullscreen mode)
Hi!I did a small system upgrade and got Nvidia GTS 250 card to replace Ati Radeon 4670.Now everything runs exactly as I expected as long I do following.- Load Pmdg M11 at a dense airport in full screen mode all setting maxed with single monitor, FPS stable at 50 (locked)- Go to Windoved mode and move overhead panel into monitor 2 and back to fullscreen mode again, FPS between 15-20 regardless of the locationI have latest Nvidia driver and Nhancer configured as should. System specs are:Asus P5QIntel core 2 E8400ASUS GTS250 DK PCIE 512MB DVI/VGA/HDMI2*1 Mbit RAMWindows Xp (SP3) 32-bitAs said system is stable, when benchmarking results are on the numbers. FS never crashes.So problem is only when trying to run 2 displays in full screen mode - any ideas what might be wrong? \\ Perttu
-
[MD11-FS9 v1.20] Climbing to G/S
Hello,I can confirm this. Still there.Also pitch oscillations with *2 rate when weather updates (FSMeteo + FS9).Rgs \\ PerttuPS. Still INCREDIBLE addon!!!
-
Radar Contact 4
Without knowing what you are specifically looking for I would say yes.RC4 is a solid product with plenty of good features... \\ Perttu
-
New system for FS9 exclusively
Bera replied to flytrumpet767's topic in System Hardware: PC | MOBO | RAM | CPU | HDD | SSD | PSU etcShould run FS9 very well.I did similar upgrade (xp32, seamless fs9 performance) few months back and my selection was:Asus P5QIntel Core 2 E5200ATI Radeon HD 4670, 512 MB2*1 Gig PC2-6400 MushkinE5200 is now overclocked to 3,32 mhz and system is rock solid. Last week to tackle slight noise issue I did replace Intel stardard cooler with Noctua NH-U12P cooler. All in all very cost efficient package and the deliverable is simply outstanding. \\ Perttu
-
Advise For 2 Panels - New Pc
Hello,I did budget upgrade to run FS9 for few more years. Very happy with new setup and everything works very well.However there is a slight problem with my 2nd display. I do want to use Ati Adaptive AA since it makes a world of difference - when used there are no significant blurries in most sceneries I use. Now when I move eg PMDG overhead panel to the second display and go back to full screen mode overhead panel is severely blurred while cockpit remains sharp and crisp. I had this same problem (with the entire panel) with single display on the new system but that was cured by adding panelastexture=0. Is there a tweak to address this problem or do I have to choose between blurry sceneries or blurry overhead panel on second display.All help highly appreciated! \\ PerttuBtw. New setup Asus P5Q, Intel Core 2 E5200 (Oc'd to 3Ghz), 2*1Gig 800ddr memory, Ati Radeon 4670, cost to upgrade was very low ~300
-
Fs9 Sound Problem (black Screen Worst Case), New System
Hi,I did recently budget upgrade to run XP + FS9 for additional 2-3 years.My system is P5Q, E5200 dual core, Ati Radeon 4670, 2*1 gig mushkin memory, XP sp3, Avast antivirus+XP firewall.Everything is newbuilt, updated and really works like a charm.Regarding FS plan is not to install any unneeded addons to maximise stability. I use LDS, PMDG, F1 ATR, FE, GE, FSmeteo, nothing 'exotic' really.However in some cases, typically on approach 10-20 NM (several locations, could be dense clouds over Atlantic as well) out, my sound goes really crazy, becomes totally incomprehensive (just bzzzzzzzzzzz...) and takes few secs to restore. In a worst case this may result black screen without any error messages. Frame rates however remain constant. I use onboard (Realtek) sound, updated. I think it may be a confict between Ati (CCC 8.12) and onboard sound since this occurs when a lot of textures are loaded. I did lower texture_bandwidth_mult from 400 to 70 and that seems to help a bit, no CTD:s anymore. I have also tried to crash my system with Soundcheck but it remains very stable regardless what I do. Anyone able to help - I am thinking putting soundcard in to solve this, since I cannot figure out how to fix it...BR \\ Perttu
-
New To Ati / Optimal (ccc) Settings Fs9
- New To Ati / Optimal (ccc) Settings Fs9
Hello,I did upgrade my PC to do 28fps in all reasonable scenarios everything maxed out. Target was to spend as little as possible.My set up is Asus P5Q, Intel core 2 duo E5200, 2*1Gig DDR800 from Mushkin, 500 Gig Samsung T-166 Spinpoint HD and MSI Ati Radeon HD4670 512MB. Everything works like a charm, everything is fresh install and all drivers updated.Only problem is with ATI, I do have CCC v8.11 and yes fps is great (locked 28) but image quality is not as good as with my previous Nvidia 6800 GT. I have tried several tweaks and made some progress but still some awful looking textures around.What are the optimal settings for ATI card - with Nhancer things used to be really easy!Thanks for your advise... \\ Perttu- CTD - atc.dll
Hello,I have suffered few CTD's (when using RC) pointing as atc.dll the cause. Obviously very annoying especially when it happens during approach. I think I have figured out one cause for this. If (departure) atis frequency will be retuned at some point of flight a black screen will occur and cause for CTD is shown atc.dll.Having flown from RKSI to VHHH I noticed both airports have same frequency for Atis and when VHHH atis was tuned CTD always occured. Then I changed VHHH atis frequency and no problem.Same thing with KMIA-EDDF - Kmia atis is the same as EDDF approach frequency. When handed over to approach CTD occurs.Anyone else having this problem? Is there other solutions than cross checking all frequencies in controller info? Perttu- FS Meteo and frame rates
Hi!No problem with me either. 100% happy with FSmeteo regarding performance. Perttu- FSmeteo down?
Hello Fellow Simmers,Any idea how long FSmeteo service has been down? I tried this Fri around 9:00 pm cet (gmt -2) and seems to be still (~ 40 hrs later) completely gone? best rgs Perttu- Information on MDmax
Hello again,No MDmax drivers around? If pls see my q's from above. Comments highly appreaciated...Funny enough - no reply from developers to my 3 emails :-( ...Best Rgs Perttu - New To Ati / Optimal (ccc) Settings Fs9
Bera
Frozen-Inactivity
-
Joined
-
Last visited