sleightflight

Still had no joy sharpening up text & fsx, maybe all the nvidia is better than ati hype isn't true. Sent from my GT-I9300 using Tapatalk

I also found it recorded a stretched box, glad I read through this thread, I will try changing the inspector settings, as far as recording I didn't even know it was until I looked in the folder the recording was in, far better than frapps for smoothness. Sent from my GT-I9300 using Tapatalk

Text and icons on the desktop are the same, I have tried messing with gamma, contrast & brightness settings don't seem to improve it. Sent from my GT-I9300 using Tapatalk

Its just a little bit fuzzy next to what I had with the ati , like a camera thats not quite focused properly. Sent from my GT-I9300 using Tapatalk

Ok, I have applied all the settings in nvidia inspector 1.9.7.2 as per guide going for the highest sparse grid setting recommended, the quality of the picture is nit as sharp as what I had with my ati card, any clues anyone please ? Sent from my GT-I9300 using Tapatalk

Google searched nvidia inspector 1.9.7.2 fsx settings and found a thread were someone else was having a problem, there was a link to the new avsim fsx guide v2.0, there I have found what I was looking for. Thanks. Sent from my GT-I9300 using Tapatalk

Ok, thanks I will check that out when I get home, I found something similar on a Google search, they were using 1.9.7.1 and the settings they had posted were not available on 1.9.7.2. Sent from my GT-I9300 using Tapatalk

Hi all, I got my new evga gtx780 classified today, un installed all amd drivers and software, installed the newest nvidia drivers and software and nvidia inspector 1.9.7.2, I have never had a nvidia card before and I could use some advice on the settings please and if I have the best driver/inspector installed for fsx. at the moment it doesn't look as nice as my 6970 did. Sent from my GT-I9300 using Tapatalk

Sorry, think I should of posted in hardware gpu forum, devs feel free to move this, sorry. Sent from my GT-I9300 using Tapatalk

Yes you are quite right, I now have tacpack manager set so every time I launch fsx it asks if I want to run that module, if I don't intend to fly the vrs superbug I don't say yes to tacpack running. Sent from my GT-I9300 using Tapatalk

Hi all, I have ordered an evga gtx 780 classified today, I currently have an msi 6970, I would like advice on un installing all amd gpu drivers/software and the correct way to install nvidia drivers/software and how to set up the nvidia for best fsx results. Thanks. Sent from my GT-I9300 using Tapatalk

I have tried it with tacpack disabled and it stalled completely normally. Sent from my GT-I9300 using Tapatalk

Well if I pushed the stick any further forward I would of gone upside down. As I said the stall was forced by me, the nose dipped, I pyshed the stick forward, airspeed increased rapidly on the asi, but the stall buzzer didn't stop, I kept the stick forward airspeed hit 180 knots, still the buzzer was sounding, I pulled out of the dive and levelled out, buzzer still sounding, pyshed forward again pulled out again at around 100 feet, airplane still refused to fly and hit the ground, I had 5000 feet to play with from the start of the exercise. Sent from my GT-I9300 using Tapatalk

Well I let the nose drop as you would to recover from a stall, once I had got above the blue line on the asi I pulled the stick back, the aircraft leveled off but the stall siren stayed on, I had full power on the engines, I tried dropping the nose some more and letting the airspeed increase even more and still the siren stayed on, the aircraft behaved as if it was in a flat stall and eventually hit the ground. I've never experienced this before in any fsx aircraft, on my powered hang glider I have performed full stalls for jollies and stalled wing overs so I am well versed in stall recovery.

Xame across another odd thing, I deliberately stalled the aircraft, it nose dived and regained normal flying speed but as far as fsx was concerned it stayed stalled all the way to the ground, even though my airspeed was saying 180 asi. Sent from my GT-I9300 using Tapatalk

I tried the simplest suggestion first which was to go into the duke settings interface and un check keep virtual cockpit loaded in memory, I have since had 3 short flights without any click spot issues, I need to find time to do a longer flight to see if that has cured my issue. Sent from my GT-I9300 using Tapatalk

ok, will do.

Yep I also get the click spot dropping out issue, I don't have ezdok or any add on guages installed. Sent from my GT-I9300 using Tapatalk

I look forward to your testing results charles, its great that you are able to test these cards out in fsx, I know you will give an un biased account of the carss. Sent from my GT-I9300 using Tapatalk

I'm pleased amd appear to of listened and released an updated driver, I still feel the 780 price is going to cone down a little more, so I'm waiting for it to happen, I haven't purchased a gpu for a few years now, the last one was a 5870 which failed just before its 2 year warranty and I got the 6970 as a replacement, I still feel fsx works better with nvidia and the 780 is a very impressive card. Sent from my GT-I9300 using Tapatalk

Yep I'm waiting til the end of this month and then I am also going to get the evga gtx 780 classified so I will be really interested in how you find it plays fsx. Sent from my GT-I9300 using Tapatalk

Ok, thanks I will give it a try then. Sent from my GT-I9300 using Tapatalk

Hows this work with horizon gen x photo scenery everyone ? Sent from my GT-I9300 using Tapatalk

Go through all the joystick settings for the peddles & delete all of the non peddle joystick assignments making sure peddles are in the drop down box, then select your flught stick/yoke & delete all joystick assignments that are for your toe brakes & rudder, try the sim again , then if its still playing up go back and , if you have the boxes ticked to reverse, un tick them or if they are not ticked tick them , trying each option, only plane I have any problem with is concorde x as I can't get the brakes to release with that one. Sent from my GT-I9300 using Tapatalk

Least it seems that they have an interest in trying to fix it. Sent from my GT-I9300 using Tapatalk