-
Say Intentions AI from a GA perspective - Warning, long!
I have tried sayintensions today and here is my humble opinion.. Having done one and a half flights in the Fenix a320, first flight went from EDDM to EDDL and everything worked as expected and I was very excited to fly the return leg to EDDM. Then right after the departure in Düsseldorf, when I switched over to departure frequency, the controller suddenly wanted to hand me over to Langen Information, which is for VFR GA traffic. It obviously forgot about my IFR clearance and even after me advising the controller about his mistake he still wanted me to be on Langen Info.. Then I went to my home airfield in Bonn Hangelar for a VFR flight and wanted to do a low approach in EDDK in a small propeller plane. The Hangelar Radio guy refused to talk German, the tower controller in EDDK has cleared me for low approach 13L right after I asked for permission to enter the CTR. He should have given me permission to enter the CTR via the reporting point Sierra1 first at least and then have me proceed towards the airport. I asked for confirmation that I'm allowed to enter via Sierra, and was asked to report Sierra 1. After I have entered the CTR, the controller suddenly wanted me to monitor Hangelar Radio ?? I said to him I'd rather stay on tower frequency, being in the CTR. I finally managed to make him tell me to join base leg for runway 13L and he did not specify it to be right base. In real life, unless they give you the instruction to continue downwind and wait for base you can continue in the pattern and wait for the clearance to do the low approach. I did so and ended up being on short final with some airbus lining up 13L right before my nose. To cut a long story short, the technology is promising, I liked the first flight from EDDM-EDDL a lot. Being able to talk to the ground crew for push is amazing, they really insert the pin, lift your nose wheel up and perform the pushback, then tell you to start the engines in sequence, wow! Im sure the Langen Information handoff was probably a hickup, but its the VFR part that still needs massive improvement at least for flying in german airspace somewhat realistically. When they get it right in the future, I'll certainly subscribe. For now, it's time for me to brush the dust off VPilot..
-
FlightFX Hawker Beechcraft 800XP
I will try this, but still, switching to loc1 should also make the plane receive the localizer and glideslope? There is one more thing that did not work for me as expected. I have selected a SID in the DEP/ARR page, the runway and hit execute. It was the second flight I did on the Hawker from EDDL-LIMC, I have filed DODEN1T SID, departing 23L. For some reason, in the pfd it still had a direct EDDL -> DODEN, instead of having all of the SID waypoints in between. Only after having imported the routing through the EFB, it finally loaded the entire SID. Seems like a bug to me, I have another addon in XP12 which also has Proline avionics and never had any issues with anything mentioned here. Waiting for the update from marketplace tbh.
-
FlightFX Hawker Beechcraft 800XP
Same today, still on 0.7, flight to LIMC, dialed in the frequency for 17L, 110,75 in NAV1, set course to 166 and switched to loc1 on the pfd. Still no ILS. Is the above not enough to get the ILS to work?`Is there some other switch or setting, i dont get it🙈
-
FlightFX Hawker Beechcraft 800XP
I have tried to fly a pattern at EDDL as the first flight, did not enter anything in the FMC except for tuning the ILS frequency for RWY 05R, 110.15 on LOC1 and dialed in the course. I switched the nav source to LOC1 via lsk on the PFD. The plane failed to 'see' the ILS no localizer or glideslope reading at all. I am still on version 0.7 due to market place.. Can someone confirm this being a bug or have I missed something?
-
Meta Quest freeze, rendering still running on the monitor.
daowl24 replied to daowl24's topic in Virtual Reality (VR) for Microsoft Flight Simulator (2020/2024)After trying all kinds of things in the past couple of hours I decided to get Virtual Desktop, and using the VDXR runtime. Its running stable now, no more freezes and silky smooth. Very happy about this. I also opted into the beta to be able to connect the headset via usb instead of wifi in Virtual Desktop, which now gives a latency-free experience.
-
Meta Quest freeze, rendering still running on the monitor.
Hi all, this one is a little hard for me to describe. Today I have downloaded an update for my Quest 3, now it has a new icon layout, the meta browser or whatever it is.. Took me a while to find how to activate the Qest Link via USB. So I went in MSFS24 to try out a new plane in VR, loaded the flight and VR mode. After entering the cockpit, the image in the headset kind of froze, i could still turn my head but the view was surrounded by a halo of jaggy artifacts and the view was limited to a single direction. However , the mirrored image on my desktop monitor looked just fine, I still could look around in all directions. So the rendering seemed to continue working in the background. I have restarted my pc and the sim and its now doing this now everytime I try. I connect the headset via usb 3.0, running a RTX 4080 on the most recent drivers. Does anyone else have this problem with their Quest 3? I had mine for quite some time now and never experienced this kind of hickup before.
-
msfs2024 freezes
I also have a problem with ctd from the start menu since today. Yesterday the sim updated itself to the latest beta and in the library menu there were some indications about available updates for the asobo packages like city updates etc.. I hit the download button on a couple of them but the downloads didn't seem to progress at all. So I quit the sim and decided to come back today. Now after reaching the main menu, a hint appears that some downloads are pending and the sim crashes to desktop a couple of seconds later. EDIT: I have just found a solution, at least to my problem, posted by a user on the official flight simulator forums: https://forums.flightsimulator.com/t/ctd-after-sim-is-loaded-beta-3-version-1-5-7-0/726185/3 I hope it is okay to post that link here.
-
PMDG B777-300ER now out for 2024
Tried the new update of the 300er in MSFS24 after a long absence and got an unresponsive fmc during flight preparation on the first flight. WASM crash I suppose? Another major annoyance is the texture quality of the liveries, at least the Emirates one from the Ops Center V3. You can literally see large pixels of the dirt marks all over the airplane, is there a way to install higher resolution textures somehow?
-
Problem list with FS2024 so far
Not sure if this has been brought up already, at least with the IniBuilds A32, if you power up the aircraft, then leave the cockpit for the external walkaround using shift-c and after a short while return to cockpit the pfd, mfd etc go into self test mode, showing the appropriate messages. Seems like the transition from ground to cockpit somehow interrupts the power supply?
-
where is download link
Just received the order confirmation mail from pmdg which includes the download link! Nice :-) Looks like the systems just needed some time to process everything. Oleg Kosse
-
where is download link
Hi, same problem here. When i saw the plane is finally available, I immediately tried to purchase it through Paypal but it didn't redirect me to the download site. Up to that point, all went well. Then I found out about the former attacks. Now I am concerned that the system wont associate the payment with my purchase. I really hope you guys at pmdg get fixed this as soon as possible. Good luck! Oleg Kosse
-
aircraft nose visible from the flight deck
Hi, i have a question about something else.. in the AoA walkaround video, at one point you can see through the bypass duct of the engine. You can see the fan blades but those stationary guide vanes that are located just behind the fan were missing. Is this due to beta version that was used in the video and are they going to be included in the release version? Or were they left out in favour of better fps, being a detail that is likely not important to many? As for my part, i'd like to see them in the model. They would greatly add to the immersion when seeing the otherwise awesome looking ngx engines and the whole plane anyway.. If they arent, would it be possible to include them in the first service pack, perhaps as a selectable feature in the fmc? Also, I would like to thank everybody at PMDG for creating such a beautiful and realistic plane! Really looking forward to flying it! Oleg Kosse