_Airbus_Fan_

Ok, thank you very much for the answer

Hello everyone Do you also have this message in your FFTF? When I click on download it loads an exe onto the desktop but it is 0KB.

I can definitely blame it on the EFB because the version of the 737 without EFB works perfectly. And since I only updated the 737-900 because I fly it very rarely, and I tested the 737-800 against it and this behavior doesn't occur there, it must be the EFB.

Hello Guys, so I was always excited about PMDG during FS9 times, but unfortunately it is or seems that PMDG really can't keep up with the current developers, be it Fenix or FS Labs. I have now installed the EFB update and when I load the PMDG the sim freezes for about 10 seconds about every 30 seconds. I don't have that with the version without EFB!! Has anyone else noticed this? So I don't have these problems with the Fenix A320, Flybywire A320, 787 Horizon or Headwind A330. So it's really no fun to fly with it, at least in MSFS in P3D everything from PMDG still works perfectly.

Ok, thank you very much for the info.. Will test it with the Sim Reverser assignment.

Hello, the weather was fine for a VR approach Autobrake were at level 3 and everything else was configured correctly. I have been flying PMDG's 777 and 747 in P3D for many years and there are no problems here. I also don't have any such problems with the Fenix or the Kuro 787. When I open the reverser they immediately run at full load, without the reverser only with autobrake the plane rolls out gently. I configured the reversers with FSUIPC and, as I said, no plane in MSFS shows such behavior.

Hallo, die 787-9 ist ein wunderschönes Flugzeug, nicht auf PMDG oder Fenix LKevel, aber wirklich toll. Was mir allerdings nicht gefällt, ist der starke Umkehrschub, den ich noch nie bei einem Flugzeug hatte, so dass das Flugzeug fast zum Stillstand kommt, wenn man den Rückwärtsgang antippt. Hat das noch jemand beobachtet??

I still use P3D V4 and V5 and think as you can see in the pictures, a V 4.5 still cuts a fine figure. And with all the money I've invested in the P3D, I won't be removing it from the system anytime soon.

My flight from ZSPD to EDDF with the Queen 747-8 D-ABYS

Hello EA is ON yes I used RDShade Shader before. But after buying Envplus I reinstalled the P3D client and deleted all the old shaders. So it shouldn't have anything to do with that. Because if I use the original P3D shaders in the sim there are no problems. If I only use Envsahde I have no problems either. But when I apply Envplus to Envshade I get this flickering and landing light dropout.

Unfortunately I have a problem when I use Envplus. My aircraft lights go out when I edit the shaders with Envplus. I use Immersion Lights on my PMDG P3D aircraft. But even with the FS Labs, the lights go out when the view moves. I tested the original shaders from P3D and I have no problems here. When I edit the shaders with Envshade and Envplus, the problem occurs. Does anyone have an idea what it could be.

@ErichB It's still better than not flying at all. Before the MSFS came, the P3D was a sim that was flown a lot. In any case, with this bug, the sim is no fun.

Hi After half an hour I remembered this error. Tried it with and without a full community folder. Up until SU9 this bug didn't exist, this bug came with the SU10 update. https://drive.google.com/file/d/1tQY_UpWjCpeXohLEzwEDqUl5b0FbuT90/view?usp=sharing Unfortunately, I can no longer fly the simulation. Asobo needs to fix this bug. In the meantime, until the bug is fixed, I'm flying P3D You have alternatives.

What you could check is the following, the AIG Traffic Controller is started with the sim and the traffic appears in the sim. If the traffic is then no longer available at the destination, it may be that the AIG Traffic Controller is no longer running, i.e. the program during the operational/flight crashes. You can check this in the Windows Event Viewer. If you don't see Traiffic anymore, it indicates that. Because the traffic is projected into the sim via this program/controller.

Yes, I use Active SKY Active Couldart and Envtex as well as Skyforce 3D for the cloud models.

So I still have these white mountains. I have already uninstalled and reinstalled the client, I also activated EA in Envshade and P3D, but the white mountains do not disappear. No idea why Envshade is the newest version installed. It's just sad that there is no Tomato Shade for the V5. Works wonderfully in the V4 and without problems.

I think that the 777 (all variants) is worse after the whole update when landing than before the updates. The flare is no longer right with me and I've been flying the 777 for more than 7 years. Landings were never a problem but now the 777 just slams onto the runway. So she does not float down nicely or does not sit down as usual. I've already tried everything from calibrations of the stick etc. but it doesn't help. I honestly regret that I didn't keep the old version, it didn't have such problems. It's a shame, because flying the 777 is no longer fun if you know from the start that the landing will not be good.

I get this message when I want to start the update in the Places market. microsoft flight simulator version 1.13.16.0 required. But when starting the Sim, no update is found when checking.

So I've tried that again with RTTS. What is very strange, with the PMDG aircraft it works that the frames are limited to 30. But it doesn't work with the FS Labs buses. It always worked before. Very funny.

No, the SIM only runs on a 60 INCH LED TV

So until yesterday the beta worked very well. Sim started today and RTTS no longer blocks the frames. I have no idea what's going on, but it always worked very well. Hope there will be a solution soon.

yes ENVTEX of Toga Projects

ahh ok. Then I not only have the problem but it seems to be a server problem. The ticket system is also offline !!

Sie beide Versionen. P3D v4 und V5 haben die neuesten Versionen

Hallo dort habe ich ein Problem mit FFTF und das Programm sagt mir, dass eine neue Version verfügbar ist. Es hat bisher immer so funktioniert, aber wenn ich auf Jetzt klick, erscheint das Fenster mit dem Produktdetails und dann ein neues, das ein Fehler meldet, wie auf dem Bildschirm angezeigt. Hat jemand diese Probleme, weil auch eine neue Installation nicht wirklich hilft.